What are the conditions for non-locals to purchase new energy vehicles?

1 Answers
DelCatherine
07/25/25 12:10am
Non-local residents who wish to purchase new energy vehicles must meet the following conditions: 1. Hold a valid Shanghai residence permit: Applicants must have continuously paid social insurance in Shanghai for at least 12 months within the last 24 months to be eligible for a new energy vehicle license plate. 2. No new energy vehicle under their name: The applicant must not own a new energy vehicle registered in Shanghai. 3. For non-mainland Chinese citizens: For example, individuals from Hong Kong, Macau, Taiwan, overseas Chinese, or foreigners who wish to apply for a Shanghai license plate for new energy vehicles must hold relevant documents and meet the dual requirement of having lived in Shanghai for more than one year. 4. Charging pile and good personal credit record: Due to the unique charging requirements of new energy vehicles, the application for a new energy vehicle license plate will involve checking whether there are charging facilities in the area and whether the applicant has any issues with their credit record.
Was this review help?
5
1
Share
More Forum Discussions

What is the Chinese meaning of car MAP?

MAP refers to the intake manifold absolute pressure sensor, which indirectly detects the engine's intake air volume. Below is relevant information: 1. MAP refers to the intake manifold absolute pressure sensor, which indirectly detects the engine's intake air volume. Its signal serves as one of the crucial signals for controlling the engine's basic fuel injection quantity. Damage to it or inaccuracy in its data will significantly impact the performance of the car engine. 2. The intake manifold absolute pressure sensor, abbreviated as MAP. It connects to the intake manifold via a vacuum tube. As the engine's speed and load vary, it senses the vacuum changes within the intake manifold, then converts the changes in internal resistance into voltage signals for the ECU to adjust fuel injection quantity and ignition timing. 3. There are various types of intake pressure sensors, including piezoresistive and capacitive types. Due to advantages such as fast response time and high detection accuracy, piezoresistive sensors are widely used in D-type injection systems. The intake pressure sensor detects the absolute pressure in the intake manifold behind the throttle. Based on the engine's speed and load, it detects changes in the absolute pressure within the manifold, converts these into signal voltage, and sends it to the engine control unit (ECU). The ECU then controls the basic fuel injection quantity based on the magnitude of this signal voltage.
13
2
Share

What is the Difference Between 1.5T and 2.0T?

The specific differences between 1.5T and 2.0T are as follows: 1. Displacement: The displacement of 1.5T and 2.0T is different. The 2.0T has an additional 0.5 displacement, making the car feel more powerful, and the horsepower is also greater. 2. Applicability: For city driving, the 1.5T provides instant power when you step on the accelerator, while the 2.0T feels slightly sluggish in the initial phase. On the highway, the 2.0T performs perfectly, surpassing all other vehicles. 3. Noise: The 2.0T outperforms in this aspect. The 1.5T produces relatively more noise inside the car when the engine exceeds 3000 RPM. 4. Maintenance Costs: The 2.0T is relatively more expensive, while the 1.5T is more affordable. 5. Suspension: Both cars have excellent suspension systems, with the 1.5T having slightly better mechanical suspension. Both cars handle well, but the 1.5T offers slightly better steering feel compared to the 2.0T. The 1.5T provides smoother acceleration and better comfort, while the 2.0T occasionally has slight jerks.
8
5
Share

Can a car's steering wheel be adjusted if it's too heavy?

If a car's steering wheel is too heavy, it can be adjusted at a professional repair shop or a 4S shop. It is not recommended to do it yourself as it may cause other malfunctions. During daily driving, car owners need to inspect their vehicles. If any abnormalities are found, they should be addressed promptly to avoid malfunctions while driving, which could affect driving safety. Below are the reasons why a car's steering wheel may become heavy: 1. Insufficient power steering fluid: Power steering fluid is an essential medium in the car's power steering pump, playing a role in transmitting steering force and buffering during vehicle operation. If the power steering fluid is not replaced after prolonged use, the steering may become heavier. It is necessary to check for any leaks in the power steering fluid. 2. Low tire pressure: During driving, if the tire pressure is too low, the contact area between the tires and the ground increases, leading to a higher friction coefficient. This makes steering more difficult, resulting in a heavy steering wheel. Insufficient tire pressure can also increase fuel consumption, reduce ride comfort, and cause abnormal tire wear. 3. Toe-in issues: The toe-in setting of a car has a significant impact on steering. If there is a problem with the car's toe-in, the steering wheel may become heavier. It is advisable to visit a professional repair shop to address this issue and prevent other malfunctions caused by improper toe-in settings.
19
2
Share

What place does the license plate 'Meng H' belong to?

Meng H is the license plate for Xilin Gol League in Inner Mongolia. More details about Inner Mongolia license plates are as follows: 1. Meng A - Hohhot City; Meng B - Baotou City; Meng C - Wuhai City; Meng D - Chifeng City; Meng G - Tongliao City. 2. Meng E - Hulunbuir League; Meng F - Xing'an League; Meng H - Xilin Gol League; Meng J - Ulanqab League. 3. Meng K - Ih Ju League; Meng L - Bayannur League; Meng M - Alxa League. Here is some information about license plates: 1. The English letters on the license plate represent the city-level code of the vehicle's location. 2. The license plate, commonly known as the vehicle plate, refers to the plates hung at the front and rear of the vehicle. They are usually made of aluminum, iron, plastic, or paper, engraved with the vehicle's registration number, registration area, or other relevant information. 3. The license plate serves as a numbering and information registration for vehicles. Its main function is to identify the vehicle's region of registration and to trace the vehicle's owner and registration details through the plate.
10
5
Share

What types of driving licenses can be applied for the first time at the age of 20?

At the age of 20, you can apply for the first time for driving licenses for urban buses, large trucks, trolleybuses, or trams. Students receiving full-time vocational driving education can apply for large passenger vehicles or tractor-trailers at the age of 20. Age requirements for driving license applications: For small cars, small automatic transmission cars, small automatic transmission passenger cars for the disabled, and light motorcycles, the applicant must be between 18 and 70 years old. For low-speed trucks, three-wheeled cars, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, or wheeled self-propelled machinery, the applicant must be between 18 and 60 years old. For urban buses, large trucks, trolleybuses, or trams, the applicant must be between 20 and 50 years old. For medium-sized passenger vehicles, the applicant must be between 21 and 50 years old. For tractor-trailers, the applicant must be between 24 and 50 years old. For large passenger vehicles, the applicant must be between 26 and 50 years old. Students receiving full-time vocational driving education can apply for large passenger vehicles or tractor-trailers between the ages of 20 and 50.
7
4
Share

What is the difference between tire sizes?

For the same car model with different configurations produced by manufacturers, the lower-end versions sometimes use one-size-smaller rims, but the tire aspect ratio will also increase. Larger rims can increase ground clearance and improve ride comfort. Here is relevant information: 1. Car spare tires can be divided into full-size spare tires and non-full-size spare tires by type. A full-size spare tire has the same specifications as the four original tires of the car and uses the same rim as the original wheels; A non-full-size spare tire is a spare tire with a narrower tread width or smaller rim size, which usually adopts a steel rim and has speed restrictions (the maximum speed cannot exceed 80km/h). It can only temporarily replace the original tire. 2. The international standard tire code expresses the section width and aspect ratio percentage in millimeters. It is followed by: tire type code, rim diameter (in inches), load index (allowable load mass code), and allowable vehicle speed code. For example: In 175/70R, 14-77H, 175 represents that the tire width is 175mm, 70 means the tire's section aspect ratio is 70%, that is, the section height is 70% of the width, R stands for radial tire, the rim diameter is 14 inches, the load index is 77, and the allowable vehicle speed is grade H.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.