What are the conditions for applying for a car quota?

What Causes the ABS Yellow Light to Illuminate in a Car?

There are multiple states of the ABS light being on, with different causes and solutions for each state. The details are as follows: State 1: ABS warning light stays on (most common). Cause 1: The ABS wheel speed sensor's sensing part is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle speed and the wheel slip rate, thus failing to issue appropriate commands to adjust braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Poor signal due to loose connections between system wires or poor contact of the ABS relay, leading to system failure. Solution: Check the wire connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off when accelerating. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. As the engine speed increases and voltage rises, the ABS indicator light turns off. The ABS system's power supply voltage is too low, possibly due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light stays on after engine start and turns off only when the engine is turned off (IGFF). Cause: Poor grounding contact of the ABS hydraulic valve body; poor contact in the ABS hydraulic valve body's wire connector; ABS computer malfunction. Solution: Loosen and then retighten the grounding screw of the hydraulic valve body, cleaning the contact surface if necessary. Check if the connector gap has widened. Replace the ABS or ABS/ASR computer if needed. State 4: ABS warning light illuminates during high-speed driving. Cause: During high-speed driving, the ABS computer detects a significant discrepancy between the rear and front wheel speed signals. Incorrect tire or wheel rim specifications may also be a factor. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: With the engine running, press the brake pedal and use a finger to push the brake switch linkage all the way down, then release the brake pedal to complete the self-setting position. Replace the brake light switch if necessary. If the ABS warning light is on, it is recommended not to continue driving. An illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's trajectory, posing significant safety risks.

13

4

Share

What is the vehicle scrappage standard?

For domestic 5-seater cars and 7-seater SUVs, as well as non-commercial small and micro vehicles, there is no usage period limit. When the normal mileage reaches 600,000 kilometers, the state will guide the scrappage. In addition to the above vehicles, small and micro non-commercial passenger cars, large non-commercial cars, and wheeled special machinery vehicles also have no usage period limit. Commercial vehicles have scrappage periods, as follows: Small and micro taxi passenger vehicles have a scrappage period of 8 years, medium-sized taxi passenger vehicles have a scrappage period of 10 years, and large taxi passenger vehicles have a scrappage period of 12 years. Public transport passenger vehicles have a scrappage period of 13 years, other small and micro commercial passenger vehicles have a scrappage period of 10 years, and large and medium-sized commercial passenger vehicles have a scrappage period of 15 years. Micro commercial trucks have a scrappage period of 8 years, light and large commercial trucks have a scrappage period of 10 years. The vehicle scrappage process is as follows: The vehicle owner applying for scrappage renewal must fill out one copy of the "Motor Vehicle Change, Transfer, Modification, Suspension, Scrappage Approval Application Form" and affix the owner's seal. The registration office will accept the application and issue a "Vehicle Scrappage Notice" for vehicles that have reached the scrappage period. For vehicles that have not reached the scrappage period, after inspection by the motor vehicle inspection office and confirmation that they meet the scrappage standards, a "Vehicle Scrappage Notice" will be issued. The vehicle owner can choose a qualified recycling company to dismantle the vehicle with the "Notice". The recycling company will dismantle the vehicle and take photos after verifying the "Notice". The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. The vehicle owner must submit the "Change Form", "XX Province Vehicle Renewal Technical Inspection Form", "Scrapped Vehicle Recycling Certificate", and vehicle dismantling photos to the motor vehicle inspection office for verification and signature. The license plates will be reclaimed, and the scrappage registration will be processed after approval according to regulations. Special Notes: According to Article 30 of the "Motor Vehicle Registration Regulations", if the vehicle is damaged and cannot be driven back to the registration location, the owner can sell the scrapped vehicle to a local motor vehicle recycling company. If a commercial vehicle is converted to a non-commercial vehicle, it must be scrapped according to the original commercial vehicle's scrappage period. According to Article 43 of the "Motor Vehicle Registration Regulations", after completing the transfer or cancellation of motor vehicle registration, the original owner can apply to the vehicle management office to use the original license plate number when registering a newly purchased vehicle. The application to use the original license plate number must meet the following conditions: (1) The application must be submitted within six months after the transfer or cancellation registration; (2) The owner must have owned the original vehicle for more than three years.

19

4

Share

How to Adjust the Middle Seat in a Seven-Seater Car?

Ensure that your eye level is slightly above the center of the windshield. The adjustment of seat height is primarily for regulating the line of sight. Comfort is the main priority. There is no specific guideline for adjusting the seat back; comfort should be the primary consideration.

9

3

Share

How to Remove the Front Seats of a Passat?

On both sides of the seat headrest, near the window, there are handles. Pulling these handles allows the backrest of the front seats to be folded forward. Under the headrests on both sides of the front seats, there is a switch. Press it and push forward to fold the backrest. After opening, there are black straps under the rear trunk seat; pull them backward.

20

4

Share

How to reset the maintenance light on BAIC Senova X55?

To reset the maintenance light, press and hold the reset button "A" while stepping on the brake pedal. Do not start the car. When the characters "INSP" flash or the display screen blinks, continue to hold down button "A". Release the brake, start the car, and turn the switch back to the "Off" position. The reset process is now complete.

17

4

Share

How to Reactivate the GLK Tire Pressure Monitoring System?

Press the SET button next to the gear shift lever. First, check the tire pressure of all four tires to ensure they are at the normal level. Then start the car. Whether the tire pressure monitoring function is successfully activated. The tire pressure monitoring indicator light on the dashboard will illuminate, indicating that the tire pressure monitoring function has been successfully activated. If there is tire pressure monitoring, it will be displayed on the dashboard.

19

5

Share

What are the conditions for applying for a car quota?

What Causes the ABS Yellow Light to Illuminate in a Car?

What is the vehicle scrappage standard?

How to Adjust the Middle Seat in a Seven-Seater Car?

How to Remove the Front Seats of a Passat?

How to reset the maintenance light on BAIC Senova X55?

How to Reactivate the GLK Tire Pressure Monitoring System?

What does it mean when the P light on the dashboard is on with a slash?

Does the Infiniti ESQ have four-wheel drive?

What is the size of the Wuling Zhiguang tire bolts?

Should the Encore use 92 or 95 octane gasoline?