What Are the Conditions for Airbag Deployment?

1 Answers
DiNatalie
07/29/25 11:28am
For most vehicle models, the airbag will deploy when the following three conditions are met: 1. The set speed must be reached: for example, speed >50km/h; 2. The point of impact must be near the sensor: generally within a 60° angle on either side of the vehicle's front; 3. The object hit must be a rigidly fixed item: such as rocks, walls, or other hard objects. Below is additional information about car airbags: 1. Use in conjunction with seat belts: In the event of a crash, if seat belts are not worn, the protective effect of the airbag will be significantly reduced. Using an airbag alone can reduce accident mortality by about 18%, using a seat belt alone can reduce it by about 42%, and when airbags and seat belts are used together, accident mortality can be reduced by about 47%. 2. Do not place items on the airbag: The force of the airbag deploying is very strong, and if there are items placed on it, they can cause secondary injuries when ejected. Therefore, do not place any items in front of or near the airbag.
Was this review help?
14
2
Share
More Forum Discussions

What are the functions of the front oxygen sensor and rear oxygen sensor?

The front oxygen sensor is mainly used to detect the oxygen content in the exhaust gas, while the rear oxygen sensor is primarily used to check whether the three-way catalytic converter is functioning properly. Below is an introduction to the front and rear oxygen sensors: 1. Installation position: The front oxygen sensor is generally located behind the exhaust pipe, and the rear oxygen sensor is usually positioned behind the three-way catalytic converter. 2. Function: The front oxygen sensor can detect the oxygen content in the exhaust gas and then send the signal to the ECU, which can adjust the engine's air-fuel ratio. The theoretically optimal air-fuel ratio is 14.7:1, and the ECU will maintain the air-fuel ratio near this theoretical optimum. The rear oxygen sensor also sends signals to the ECU, which compares the data from both sensors. If the data from both sensors is the same, it indicates that the three-way catalytic converter is faulty. The three-way catalytic converter can reduce pollutants in the exhaust gas, which is very important for environmental protection.
14
1
Share

How to Replace the Fog Light Bulb on a LINGDONG?

The method for replacing the fog light bulb on a LINGDONG: 1. Take out a flat-head screwdriver and pry from the back of the fog light grille. Then, use the flat-head screwdriver to gently pry open the clips securing the front bumper from the gaps on the front side. Once all clips are pried open, the fog light grille can be removed. 2. You will see two screws fixing the fog light. Use a T25 Torx wrench to remove these two screws. 3. After removing the screws, gently pull upwards on the side where the screws were removed to take out the fog light and replace the bulb. The LINGDONG is a model under Beijing Hyundai. In terms of body dimensions, it measures 4610mm in length, 1800mm in width, and 1450mm in height.
8
5
Share

Which car does Audi C8 refer to?

Audi C8 refers to the 2019 Audi A6L. Below are the relevant details of the 2019 Audi A6L: 1. Body Dimensions: The 2019 Audi A6L has body dimensions of 5050mm in length, 1886mm in width, and 1475mm in height, with a wheelbase of 3024mm. 2. Powertrain: It is equipped with four engine options: 1.8TFSI, 2.0TFSI, 2.5FSI, and 3.0TFSI. The top-tier 50TFSI model still features the EA888 3.0L V6 supercharged engine from the previous generation. 3. Exterior Design: The iconic hexagonal grille is larger, and the lines of the front bumper are sharper, giving the car a more youthful overall appearance. The model offers two design variants: the Elegance trim, which leans towards a business-oriented style, and the Dynamic trim, which is more sporty.
14
0
Share

How to Calculate Car Horsepower?

Horsepower is measured in PS, commonly known as 'horse'. Here is an introduction to calculating car horsepower: 1. Calculation formula: Car horsepower refers to the engine power unit, which is the engine's working capacity per unit time. Power is calculated from torque, and the formula is: Power (w) = 2π × Torque (N-m) × Speed (rpm)/60. After simplification, it becomes: Power (kw) = Torque (N-m) × Speed (rpm)/9549. 2. Introduction to horsepower: Horsepower is a commonly used unit of power measurement in engineering technology. It is a physical quantity that measures the top speed of a car—the higher the horsepower, the higher the top speed. Torque is a physical quantity that measures the acceleration ability of a car—the greater the torque, the better the acceleration performance. Maximum power is usually expressed in horsepower (PS) or kilowatts (kw), with 1 horsepower equal to 0.735 kilowatts.
15
3
Share

What is the penalty for making a U-turn from the second left-turn lane?

Making a U-turn from the second left-turn lane results in a 3-point deduction and a fine. Prohibited U-turn situations are as follows: U-turns are prohibited where there are 'No U-turn' signs or 'No Left Turn' signs: If there is a sign prohibiting U-turns, then U-turns are not allowed at that intersection. The action of making a U-turn is an extension of a left turn, so if there is a sign prohibiting left turns at an intersection, U-turns are also prohibited there. U-turns are prohibited at crosswalks: U-turns are not allowed at crosswalks. If U-turns are permitted at an intersection, you must cross the crosswalk before making a U-turn and cannot make a U-turn on the crosswalk. U-turns are prohibited when there is no left-turn lane: Even in the leftmost lane, if there is no sign permitting left turns, U-turns are not allowed. U-turns are prohibited within the second left-turn lane: When a vehicle is stopped in the second left-turn lane, it cannot make a U-turn. In the absence of any directional signs, vehicles can only make U-turns from the innermost left-turn lane. U-turns are prohibited at solid yellow lines: U-turns are not allowed at solid yellow lines. Even if there is a sign permitting U-turns, you must wait for the green light and cross the stop line to make a U-turn. U-turns are prohibited on highways: Crossing the central divider to make a U-turn on a highway is illegal and will result in a fine and a 12-point deduction. If you miss an exit on the highway, continue to the next exit and leave the highway. Do not attempt an illegal U-turn.
16
4
Share

What is the displacement of the 2019 New Sagitar?

2019 New Sagitar has three displacement options: 1.2L, 1.4L, and 1.6L. Compared to the 2018 model, the 2019 New Sagitar adds a 1.2L and some 1.4L powertrain models, retains all 1.6L and some 1.4L powertrain models, and discontinues the 2.0L powertrain model. Below is an introduction to the 2019 New Sagitar: 1. Exterior Design: The New Sagitar features a hexagonal chrome-plated grille that integrates with the LED headlights on both sides. It also comes with 16-inch wheels and a small ducktail-style rear design. 2. Interior Space: The dashboard is largely wrapped in leather, and the central control area is designed to tilt towards the driver's seat. It includes a 10.3-inch LCD instrument panel and a central control screen with built-in Android Auto, Apple CarPlay, and Baidu CarLife systems. 3. Power Parameters: There are three models in total with 1.2L, 1.4L, and 1.6L displacements. Manual models are paired with a 5MT gearbox, while automatic models use a 7DCT gearbox, delivering a maximum horsepower of 150Ps and a maximum torque of 250 Nm.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.