What Are the Components of Gear Oil?

1 Answers
LaEmerson
07/25/25 1:40am
Gear oil is primarily composed of petroleum base oil or synthetic lubricating oil, blended with extreme pressure anti-wear agents and oiliness agents to form an essential lubricant. It is used in various gear transmission devices to prevent tooth surface wear, scuffing, sintering, etc., thereby extending their service life and improving efficiency. Below is more information about gear oil: 1. Gear oil mainly refers to the lubricating oil for transmissions and rear axles. It differs from engine oil in terms of usage conditions, composition, and performance characteristics. Gear oil primarily functions to lubricate gears and bearings, prevent wear and corrosion, and assist in heat dissipation. 2. Automotive gear oil is used in gear transmission mechanisms such as steering gears, transmissions, and drive axles. Due to the high surface pressure during gear transmission, gear oil plays a crucial role in lubrication, anti-wear, cooling, heat dissipation, anti-corrosion and rust prevention, cleaning, and reducing tooth surface impact and noise.
Was this review help?
16
1
Share
More Forum Discussions

What to Do If the Car Gets a Little Paint Scratched?

Solutions for minor paint scratches on the car: If it's on the front or rear bumper, you can leave it as is since bumpers are made of plastic and won't rust. If the scratch is on a metal panel, you can use a touch-up pen or similar product for minor repairs; a full repaint isn't necessary. A touch-up pen is a tool for repairing car paint scratches—just choose the right color matching the original car paint. Apply the touch-up pen to small scratches or areas where the paint has chipped to repair, conceal, and fill in the damage. The touch-up pen typically contains the original car paint, and since car models vary, only a dedicated touch-up pen should be used for each car. For larger, longer, or deeper scratches, a touch-up pen can only provide a temporary cover-up and won't achieve the same effect as a full repaint.
17
0
Share

How to Determine if the Oxygen Sensor is Faulty?

Methods to determine if the oxygen sensor is faulty: Observe the color of the oxygen sensor's tip. If the tip is white, it indicates that the oxygen sensor has been contaminated by silicon to a certain extent and needs to be replaced promptly. If it is brown, it is caused by lead contamination and also requires replacement. If the tip is black, it is mainly due to carbon buildup, and simply cleaning it thoroughly will suffice. The primary function of the automotive oxygen sensor is to enable the engine to obtain an optimal concentration of the air-fuel mixture, thereby reducing the emission of harmful gases and saving fuel. The oxygen sensor measures the oxygen content in the exhaust gases after engine combustion, converts the oxygen level into a voltage signal, and transmits it to the engine computer. This allows the engine to achieve closed-loop control based on the excess air factor, ensuring that the three-way catalytic converter efficiently converts and purifies the three major pollutants in the exhaust—hydrocarbons, carbon monoxide, and nitrogen oxides—maximizing the reduction of emissions.
15
2
Share

What is the Difference Between Wide Tires and Narrow Tires?

Differences between wide tires and narrow tires: 1. Applicable vehicle types differ: Wide tires are typically used in mid-to-high-end models; narrow tires are usually used in ordinary models. 2. Applicable rims differ: Wide tires are mounted on larger rims; narrow tires are mounted on smaller rims. 3. Sidewall height differs: Wide tires are relatively thinner; narrow tires are taller and thicker. The width of a tire refers to the width of the tire tread. Compared to narrow tires, wide tires have a larger tread width, resulting in a larger contact area with the ground and greater frictional resistance. As a result, they provide stronger grip but also higher fuel consumption and more tire noise. In contrast, narrow tires offer better economic practicality due to their smaller contact area, which reduces frictional resistance. This leads to improved vehicle acceleration performance, less tire noise, lighter driving feel, and better fuel efficiency.
11
3
Share

How to Determine When a 12V Battery is Fully Charged?

Methods to determine when a 12V battery is fully charged: You can judge by the charging time. Typically, the battery capacity of a household car is around 60Ah, and the required charging current is one-tenth of the battery capacity, which is 6A. Charging at this current usually takes about 3 to 5 hours to fully charge. If charging with a lower current, it may take around 10 hours to fully charge. The car battery is an essential part of the vehicle and can be divided into traditional lead-acid batteries and maintenance-free batteries. Since the battery uses a lead-calcium alloy for the grid frame, the amount of water decomposition during charging is minimal, and water evaporation is also low. Additionally, the sealed structure of the casing releases very little sulfuric acid gas. Therefore, compared to traditional batteries, it has advantages such as not requiring any liquid addition and having a long power storage time.
17
5
Share

How many kilometers do car spark plugs need to be replaced?

Car spark plug replacement cycle: Ordinary copper-core spark plugs need to be replaced approximately every 30,000 kilometers; precious metal spark plugs need to be replaced approximately every 80,000 kilometers. Strictly speaking, there is no uniform standard answer for how many kilometers car spark plugs need to be replaced, as there are many objective factors that can affect the replacement time. The owner's driving habits, usual road conditions, different car models, different brands, and the quality of the spark plugs will all significantly impact the replacement time. It is recommended to check the vehicle's user manual, which will provide detailed instructions. Simply follow the instructions in the manual for replacement.
12
5
Share

How to turn off the daytime running lights on a Golf car?

The daytime running lights on a Golf car cannot be turned off, and the daytime running lights cannot be turned off as they are a safety feature for daytime driving. If you want to turn off the daytime running lights, you need to use a specialized computer to change the coding, and only a 4S shop can perform this operation. The Golf is a small family car model introduced by Volkswagen, with body dimensions of 4199mm in length, 1786mm in width, and 1479mm in height, and a wheelbase of 2578mm. In terms of appearance, the Golf adopts a family-style design concept, with a double-bar grille paired with sharp-angle headlights, creating a stylish yet stable look; the side profile features slender lines, and the rear is simple and robust, with LED taillights that enhance its visual appeal.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.