What are the components of brake fluid?

1 Answers
SanEmmanuel
07/29/25 5:15pm
Brake fluid is composed of polyethylene glycol ether solvent, lubricant base fluid, and a small amount of additives. Below is relevant information about brake fluid: 1. Performance: Brake fluid, also known as brake hydraulic fluid or mineral oil brake fluid, possesses properties such as oxidation stability, anti-foaming, resistance to rubber swelling, and rust prevention. 2. Replacement: The replacement cycle is related to the vehicle's braking during driving and the braking system. Brake fluid has water-absorbing characteristics. If not replaced for a long time, the safety factor of driving will decrease. For vehicles used frequently, brake fluid can be replaced at around 30,000 kilometers; for less frequent use, the replacement cycle can be extended accordingly, generally around 50,000 to 60,000 kilometers.
Was this review help?
3
2
Share
More Forum Discussions

Will the wheel hub become too hot to touch under normal circumstances?

Under normal circumstances, the wheel hub will not become too hot to touch. However, after prolonged driving, the brake pads and tires may become quite hot. The wheel hub is the rotating part of the wheel that connects the tire's inner rim to the central rotating component via spokes. It is the metal part mounted on the axle that supports the tire, also known as the rim, steel wheel, or wheel disc. The wheel hub contains information such as size, width, PCD and bolt pattern, offset, and center bore. Reasons for a hot wheel hub: 1. Heat generated from prolonged friction between the tire and the ground; 2. High temperatures caused by prolonged braking and friction from the brake pads; 3. Leakage in the brake caliper or brake fluid line; 4. Overly tight or abnormally worn bearings.
12
5
Share

How to Clear the Maintenance Reminder on Honda Haoying?

Here are the specific steps to clear the maintenance reminder on the Honda Haoying: 1. Press and hold the "A" button while stepping on the brake pedal; do not start the engine, but the vehicle's power must be turned on. 2. The characters on the dashboard will flash or the entire display will flash; continue holding the reset button "A" until "..." appears on the display. 3. Release the brake pedal and the "A" button simultaneously; turn the ignition switch back to the "Off" position. The reset process is now complete. 4. Additional Information: The Haoying is a compact SUV under Honda; its 2.0-liter naturally aspirated engine delivers 146 horsepower and a maximum torque of 175 Nm.
17
3
Share

How often should the transmission fluid in an automatic transmission car be changed?

For an automatic transmission car, the transmission fluid should generally be replaced every two years or every 40,000 kilometers driven. More information about transmission fluid is as follows: 1. Any type of fluid has an expiration date and needs to be replaced after a certain mileage or period of use. 2. Transmission fluid serves the functions of transmitting hydraulic power and cleaning and lubricating. If the car is used for a long time without changing the transmission fluid, the fluid particles may enlarge or generate debris, blocking the oil passages and potentially causing transmission malfunctions. Therefore, transmission fluid must be replaced regularly. 3. There are two methods for changing transmission fluid: one is the gravity drain method, and the other is the machine flush method.
18
2
Share

What are the precautions for vehicle transfer?

Precautions for vehicle transfer are as follows: 1. Be sure to check the original vehicle's purchase tax receipt. Some vehicles may not have paid purchase tax before, and after transfer, these unpaid or tax-exempt vehicles will be required to pay the purchase tax. 2. Insurance transfer should be completed in time to avoid unnecessary trouble during claims. 3. Mortgaged vehicles and vehicles under supervision are prohibited from being traded. Vehicle information can be checked through the vehicle management office. 4. When purchasing a used car, relevant policies and regulations should be reviewed. Some vehicles are not allowed to be traded or transferred, and corresponding change procedures need to be completed after the used car transfer.
1
3
Share

How to Solve Car ETC Malfunctions?

ETC malfunction solutions involve driving to the original ETC processing point to diagnose the damage cause. If the issue is with the device, a free replacement can be provided; if the malfunction is due to human factors, repairs will be at your own expense. ETC Usage Precautions: The ETC transaction sensing range is 8 meters. When encountering a stationary vehicle ahead, maintain a distance of over 10 meters to prevent automatic fee deduction for the preceding vehicle, which may occur if their ETC device is faulty or absent. ETC lane recognition speed is 20km/h. Excessive speed will prevent reading of vehicle device information and may result in failed payment. Unauthorized removal or movement of OBU devices, or detachment/loosening of ETC electronic tags will deactivate the electronic tag. These can be inspected at the bank where the ETC card was issued or at highway service centers. Non-human caused loosening/detachment only requires reactivation. When using debit cards linked to ETC, insufficient balance may cause payment failure. Follow on-site staff guidance to use manual MTC lanes with cash or card payment. Excessively thick windshield glass may cause poor signal reception. This particularly applies to vehicles with replaced windshields after accidents or modified front windshields.
7
1
Share

Is ETC Free on Highways?

ETC on highways is not free, but there is a 5% discount. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Low-carbon, vehicles pass through toll stations without stopping, reducing noise and exhaust emissions, and minimizing pollution; Reduced wear and tear: Saves costs, decreases the frequency of vehicle starts and brakes, reduces wear and fuel consumption, and users can also enjoy a 5% discount on toll fees; Improved efficiency: The theoretical efficiency of ETC lanes can be increased by 2-3 times, making traditional ETC more updated, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. How ETC works: Through dedicated short-range communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, computer networking technology is used to process backend settlements with banks. This allows vehicles to pass through highway or bridge toll stations without stopping while still paying the required fees.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.