What are the components of antifreeze?

1 Answers
OKendra
07/28/25 4:34pm
The components of antifreeze are: purified water, methanol, colorants, preservatives, and descaling agents. The functions of antifreeze are: 1. To provide anti-corrosion protection for components of the cooling system; 2. To prevent scale buildup, avoiding the reduction of the radiator's heat dissipation efficiency; 3. To ensure the engine operates within the normal temperature range. The hazards of not replacing expired antifreeze: 1. It causes the water in the antifreeze to evaporate, leading to changes in the antifreeze's freezing point and affecting its performance; 2. It fails to provide anti-corrosion, anti-rust, and descaling functions for the engine, impacting the engine's lifespan; 3. It increases viscosity, reducing cooling and heat dissipation efficiency.
Was this review help?
14
1
Share
More Forum Discussions

What type of gasoline should motorcycles use?

Motorcycles can use either 90 or 93 octane gasoline. Extended relevant information is as follows: 1. Compression ratio: Refueling should follow the principle of suitability. It can be determined based on the engine's compression ratio. For compression ratios below 9, 90 octane is sufficient; for those below 9.5, 93 octane is appropriate. If the compression ratio is high and the gasoline octane is low, it can easily cause knocking, damaging the engine. 2. Gasoline octane: Since engines with different compression ratios operate at varying temperatures, their requirements for anti-knocking also differ. For the same octane gasoline, the higher the engine's compression ratio, the more likely it is to produce greater knocking. Therefore, engine manufacturers generally specify the suitable gasoline octane for vehicles when they leave the factory.
11
5
Share

How many colors are available for the Beijing BJ40?

Beijing BJ40 offers 7 color options, which are Midnight Black, Jungle Green, Flame Red, Snowfield White, Desert Gold, Danxia Red, and Beret Green. The BJ40 is a compact SUV launched by Beijing Automotive, with body dimensions of 4645mm in length, 1925mm in width, and 1871mm in height, and a wheelbase of 2745mm. In terms of exterior design, the Beijing BJ40 adopts a relatively square and boxy styling. The front grille features a five-hole design and is further accentuated with chrome trim, creating a strong visual impact overall.
9
5
Share

Where is the engine number located on the Hyundai Tucson?

The engine number of the Hyundai Tucson is located on the lower left side at the front of the engine, on the side plane where the cylinder block meets the transmission housing. The engine model is an identification code assigned by the engine manufacturer in accordance with relevant regulations, corporate or industry practices, and the attributes of the engine, used to indicate information such as the manufacturer, specifications, performance, features, technology, purpose, and production batch of the engine. The dimensions of the Hyundai Tucson are: length 4545mm, width 1850mm, height 1670mm, with a wheelbase of 2670mm. It features configurations such as headlight level adjustment, projection headlights, enhanced lighting capability, keyhole illumination, folding key, portable ashtray, AUX interface, and steering wheel audio controls.
2
0
Share

What does the yellow engine light on the dashboard mean?

The yellow engine light on the dashboard indicates an engine malfunction. There are two scenarios when this light illuminates: 1. When the vehicle's power is turned on, the system performs a self-check. During this process, not only the engine yellow light but also other warning lights will illuminate simultaneously and then turn off together, which is a normal phenomenon; 2. If the engine malfunction yellow light remains illuminated after the vehicle is started, it means the ECU is alerting the owner that there is an engine malfunction, which is an abnormal condition. When the engine warning light on the dashboard is on, it cannot be manually reset. Typically, the issue needs to be diagnosed and resolved at a 4S shop using specialized fault detection equipment before the light can be turned off.
17
3
Share

How to Remove Cured Glass Adhesive?

Cured glass adhesive removal methods: 1. Use a blade to scrape it off, which can basically remove all cured glass adhesive. Be careful not to scratch the glass and remove the adhesive cautiously; 2. Use banana oil to remove it, as its main component is butyl acetate, which can effectively dissolve various solvents; 3. Apply some essential balm on the glass with residual adhesive. After the balm fully penetrates the adhesive, it can be easily wiped off. Automotive glass adhesive is an important component. The glass adhesives used by various car manufacturers for after-sales replacement are treated as original equipment parts, complete with part numbers, and are used at authorized repair shops (4S shops) to ensure that the replaced glass maintains the original vehicle's performance state.
19
1
Share

How long is the validity period of green license plates for electric vehicles?

There is no validity period for green license plates on electric vehicles. Electric vehicles with green license plates comply with the national new standard. There is another type of electric vehicle with yellow license plates, which do not meet the national new standard. Electric vehicles with yellow license plates have a three-year transition period during which they can operate normally. After the transition period, electric vehicles that do not meet the national standard are not allowed on the road. Electric vehicles refer to vehicles powered by an on-board power source, driven by electric motors to move the wheels, and meeting all the requirements of road traffic and safety regulations. The drive motors of pure electric vehicles can be categorized into DC brushed, brushless, permanent magnet, and electromagnetic types.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.