What Are the Common Sense Tips for Safe Driving in the Rainy Season?

1 Answers
OLucy
07/29/25 4:17pm
Common sense tips for safe driving in the rainy season: 1. Slow down and maintain a safe distance. Poor visibility during rainy days requires drivers to reduce speed and keep a safe distance from the vehicle ahead; 2. Avoid unnecessary overtaking. Overtaking in the rain can easily splash water onto adjacent or oncoming vehicles, leading to reduced visibility and increased danger; 3. Slow down when encountering pedestrians. Pedestrians may act hastily in the rain, increasing the risk of accidents; 4. If you need to park temporarily on the roadside during rain, avoid turning off the engine to prevent the ignition system from getting wet, which could make it difficult to restart; 5. Use fog lights in heavy rain to improve visibility.
Was this review help?
2
2
Share
More Forum Discussions

What Needs to Be Replaced in a Flood-Damaged Vehicle?

Flood-damaged vehicles require the following replacements: Engine: Do not attempt to start or turn over the engine. Tow it to a repair shop as soon as possible for disassembly and cleaning. The engine must have all spark plugs removed and undergo a cylinder pressure test. Typically, gasoline engines should have cylinder pressure within the range of 900 kPa to 1100 kPa. Transmission: After disassembly, clean the oil passages, valve body, friction plates, and torque converter. It is best to send the transmission to a professional automatic transmission repair shop for cleaning, inspection, and repair. Replace the transmission fluid, friction plates, check valves, and the transmission repair kit. Wiring Harness: For vehicles submerged for several days, it is advisable to replace all wiring harnesses, including those for electric motors, audio systems, air conditioning control panels, ABS modules, and other electronic components.
9
1
Share

What does it mean when the water temperature gauge shows a red light?

When the water temperature gauge shows a red light, it indicates that the water temperature is too high. Below is the normal water temperature range and how the water temperature gauge works: Normal water temperature range: The water temperature refers to the temperature of the coolant. After the engine warms up, it typically displays 70-90 degrees Celsius as normal. When the coolant level in the radiator is low, the water temperature will rise, and you need to add water at this point. If the water temperature gauge approaches the "H" mark or the red danger zone, and in severe cases, the water temperature warning light comes on, it means the engine coolant temperature is too high. How the water temperature gauge works: The sensor of the water temperature gauge is a thermistor-type sensor, which is fixed to the engine's coolant passage with threads. The thermistor determines the amount of current flowing through the coil windings of the water temperature gauge, thereby driving the movement of the gauge's pointer.
8
0
Share

How to Upgrade the Navigation System on Baojun 730?

Baojun 730 navigation upgrade steps: 1. Download the new car-mounted version of the navigation APP and save it to a USB drive; 2. Insert the USB drive into the car's USB port, enter the setup mode of the car computer, and uninstall the original map program; 3. Click to install the downloaded map software from the USB drive, and the program will automatically install in the original location; 4. After successful installation, set up the account and download map data. The Baojun 730 is a family MPV product under SAIC-GM-Wuling Baojun. The vehicle's dimensions are 4685 mm in length, 1785 mm in width, and 1735 mm in height, with a wheelbase of 2750 mm. The front suspension of the Baojun 730 is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension.
12
5
Share

Where is the oil filter of Peugeot 408 located?

The oil filter of Peugeot 408 is generally located at the lower front part of the engine. Open the engine hood, and you'll find it near the middle left side of the driver's position, next to the catalytic converter, close to the lower guard plate with its opening facing downward. The function of the oil filter is to remove impurities, colloids, and moisture from the engine oil, delivering clean oil to various lubrication points. The Peugeot 408 is a compact car with dimensions of 4750mm in length, 1820mm in width, and 1488mm in height, and a wheelbase of 2730mm. The design of the Peugeot 408 embodies Peugeot's new DNA: the front face design features originate from the iconic lion-eye headlights, which integrate seamlessly with the engine hood, presenting a bright and penetrating appearance that strongly reflects Peugeot's brand image. The car's grille with chrome trim, the chrome-finished Peugeot logo, and the crystal-clear fog lights are tightly combined, making the vehicle visually appear wider, exuding a premium feel while creating a grand and intense visual tension.
3
2
Share

What is the fuel tank capacity of the Mazda6 Atenza in liters?

The fuel tank capacity of the Mazda6 Atenza is 56.2 liters. This vehicle is equipped with a 2.0L 158HP L4 naturally aspirated engine and a 6-speed automatic transmission, delivering a maximum power of 116 kW and a maximum torque of 202 Nm. The body dimensions are 4870mm in length, 1840mm in width, and 1445mm in height, with a wheelbase of 2830mm. The front track is 1585mm, and the rear track is 1575mm. The trunk capacity is 483 liters. In the same vehicle class, the 2022 Honda Accord 260TURBO Comfort Edition has a fuel tank capacity of 56 liters, while the 2022 Volkswagen Passat 280TSI Business Edition has a fuel tank capacity of 68.5 liters. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe fill level. There is additional space from the safe fill level to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, which is marked with 'E' and 'F'. When the needle is close to 'E', it indicates low fuel, while proximity to 'F' indicates sufficient fuel.
16
4
Share

What engine does the BYD Yuan use?

The BYD Yuan is equipped with two types of engines: a 1.5-liter naturally aspirated engine and a 1.5-liter turbocharged engine. The 1.5-liter naturally aspirated engine delivers a maximum power of 109 horsepower and a maximum torque of 145 Nm, achieving peak power at 5,800 rpm and peak torque at 4,800 rpm. The 1.5-liter turbocharged engine produces a maximum power of 154 horsepower and a maximum torque of 240 Nm, with peak power output at 5,200 rpm and peak torque available between 1,750 rpm and 3,500 rpm.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.