What Are the Common Sense Tips for Safe Driving in Summer?

2 Answers
DiPhoebe
08/27/25 5:17am
Common sense tips for safe driving in summer are as follows: Preventing tire blowouts: In summer, high temperatures cause tire temperatures to rise, making rubber more prone to softening, and in severe cases, tire burning may occur. When driving at high speeds, encountering hard objects can easily lead to tire blowouts. Therefore, always check tire pressure while driving. If the tires are overheating or the pressure is too high, park the car in a shaded area and wait for natural cooling. Preventing vapor lock: High summer temperatures limit heat dissipation, and when driving at slow speeds with high engine RPMs, heat dissipation becomes difficult, leading to vapor lock. If vapor lock occurs, stop the car promptly to cool down and address the issue. Preventing water shortage: In hot weather, water in the radiator evaporates faster. Always check the coolant level and monitor the temperature gauge. If a water shortage is detected, stop the car immediately, wait for it to cool down before adding water, and avoid opening the radiator cap right away to prevent burns.
Was this review help?
5
1
Share
Teagan
09/09/25 4:17am
During hot summer drives, I pay special attention to safety details. Due to high temperatures, I always check tire pressure first, as driving on hot roads can easily lead to overinflation and increase the risk of a blowout. I make it a habit to check the local weather forecast and road conditions via a mobile app before heading out, avoiding sudden thunderstorms or congested routes. Normally, I ensure the air conditioning system works properly and regularly clean the filters to prevent odors. Additionally, I never overlook the issue of drowsy driving—if I drive for more than two hours, I always take a 20-minute break at a service area to hydrate and recharge. Water is a must, and I always keep two or three bottles in the car to prevent heatstroke. Summer also brings storm risks, so if I encounter heavy rain and slippery roads, I slow down, maintain a safe distance, and turn on fog lights for better visibility. Over time, these small tips have made my trips safer, especially during peak urban commuting hours.
Was this review help?
9
0
Share
Expand All
More Forum Discussions

Has Weichai Enranger Already Ceased Production?

Weichai Enranger has already ceased production. Below are specific details about Weichai Enranger: 1. Brand Introduction: The "Enranger" brand is the first brand established by Weichai in the light vehicle business sector. From then on, all products in Weichai's light vehicle sector will belong to the "Enranger" brand, which also marks the official start of Weichai Automobile's exploration and innovation in the light vehicle market. 2. Company Introduction: Weichai Power took control of Jiachuan Company in 2009 and acquired the remaining equity of Jiachuan Company in March 2012, making Jiachuan Company a wholly-owned subsidiary of Weichai Power. Weichai Automobile is located in Chongqing, one of China's automotive manufacturing centers and the economic hub of the western region, with its production base situated in Shuangfu New District, Jiangjin District, Chongqing.
12
3
Share

Why does the car automatically shut off when stopping?

The following are the reasons why a car automatically shuts off when stopping: 1. Misoperation: Especially for beginners, such as shifting to the wrong gear, braking too hard, improper clutch-throttle coordination, or accidentally turning off the car with the key. Simply restart the engine. 2. Dirty throttle/idle speed control valve: This mostly occurs at idle speed, often accompanied by engine shaking. Lightly press the accelerator when restarting to provide fuel for ignition. It is recommended to clean the throttle promptly. 3. Fuel system failure: Causes include poor fuel quality, running out of fuel, fuel pump burnout, clogged fuel lines, faulty fuel pump fuse, or defective fuel pressure sensor. Inspect related components. 4. Ignition system failure: Includes spark plug issues, faulty ignition coil/module, or aging cylinder wires. Check related components. 5. Throttle or idle speed control valve failure: These are critical components of the engine intake system and relatively precise parts. Many cases of engine stalling or failure to start are due to damaged throttle assemblies or idle speed control valves.
14
0
Share

Where is the outdoor sensor located on the BMW 525?

The outdoor sensor on the BMW 525 is located above the brake disc ventilation duct. The BMW 525 belongs to the BMW 5 Series. Below is a detailed introduction about the BMW 5 Series: 1. Overview: The domestic 5 Series is a high-end sedan. The current generation of the 5 Series was introduced in 2004. The BMW 5 Series is one of the most outstanding series in automotive history, with its peak era beginning with the third-generation E34 (1988-1996). The current 5 Series is the third-generation product of the E34. 2. Other details: The top speed is 250 km/h. The seat material is genuine leather. The acceleration time is 8.6 seconds (0-100 km/h). The drivetrain is front-engine, rear-wheel drive. The body weight is 1740 kg. The number of valves is 24. The standard transmission is an 8-speed automatic with manual shifting. The maximum power is 190 KW/rpm. The maximum torque is 400 Nm/rpm.
9
4
Share

Where is the tire pressure reset button on Wuling Hongguang Mini?

The tire pressure reset button on Wuling Hongguang Mini is located under the dashboard. What to do if the tire pressure is insufficient: If there is no visible damage to the car's tires, you can simply inflate them to the normal tire pressure and then reset the tire pressure system. If upon inspection you find that the tire has been punctured, you should promptly drive to a car repair shop to have the tire patched before reinflating it. If the tire pressure warning appears again some time after inflating, but there is no hole in the tire, it may be due to air leakage caused by a deformed wheel rim. It is recommended to check the wheel rim and replace it if necessary. How the tire pressure monitoring system works: It uses pressure sensors installed inside the tires to measure the tire pressure, and a wireless transmitter to send the pressure information from inside the tire to the central receiver module. How the tire pressure monitoring system works: It uses pressure sensors installed inside the tires to measure the tire pressure, and a wireless transmitter to send the pressure information from inside the tire to the central receiver module.
15
0
Share

What indicator light comes on when tire pressure is low?

When the tire pressure in a car is low, the tire pressure warning indicator light will illuminate. Whenever there is a change in the tire pressure, the tire pressure warning light will come on. In such cases, it is recommended to pull over safely and check the tires. If you have a tire pressure monitoring tool, you can check the pressure of all tires to ensure they are within the normal range. Hazards of excessive tire pressure: Reduced friction and adhesion of the tires, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates wear on the central tread pattern of the tire, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Overstretches the tire cords, reducing tire elasticity and increasing the load on the vehicle during driving; Decreases puncture resistance. When encountering sharp objects like nails or glass on the road, the tire is more prone to punctures, leading to internal cracks or blowouts. Hazards of insufficient tire pressure: Increases friction with the road surface, leading to higher fuel consumption; Causes heavy steering and deviation, posing safety risks; Increases movement in various parts of the tire, leading to excessive rolling and abnormal heat generation; Reduces the effectiveness of cords and rubber, causing delamination or cord breakage, and excessive friction with the rim, damaging the bead area and causing abnormal wear; Multiplies the friction between the tire and the ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to blowouts; Increases tire deformation, making the sidewalls prone to cracks and generating flexing movements, leading to excessive heat, rubber aging, cord fatigue, and breakage. It also increases the tire's contact area with the ground, accelerating shoulder wear.
5
1
Share

What is the fuel consumption of the Buick LaCrosse 1.5t?

Buick LaCrosse 1.5t fuel consumption per 100 kilometers: 6.3/6.5 liters per 100 kilometers. Additional information is as follows: 1. Reducing fuel consumption: The starting quality of the engine before the vehicle starts is directly related to fuel consumption. The more times the engine is started, the more fuel is wasted. When starting the vehicle, choose a low gear, apply the throttle smoothly, and accelerate slowly. When the car reaches a certain speed for a gear, learn to listen to the engine sound to gradually shift from low to high gears. 2. Gears: Most cars have 5 forward gears and one reverse gear. Each gear has a certain transmission ratio, with most gears having a ratio greater than 1. The 4th gear has a ratio of 1, known as the direct drive gear, while the 5th gear with a ratio less than 1 is called the overdrive gear. In neutral, the output shaft gear is in a non-engaged position and cannot receive power transmission. The more gears a car has, the better its acceleration, smoothness, and fuel efficiency.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.