What Are the Common Sense of Safe Driving in Summer?

1 Answers
DiArabella
07/29/25 8:58pm
Common sense for safe driving in summer is as follows: 1. Prevent tire blowouts: High summer temperatures cause tire temperatures to rise, making rubber prone to softening, and in severe cases, tire burning may occur. When driving at high speeds, encountering hard objects can easily lead to tire blowouts. Therefore, always check tire pressure while driving. If the tires are overheated or the pressure is too high, park the car in a shaded area to allow natural cooling. 2. Prevent vapor lock: High summer temperatures limit heat dissipation speed. When driving at low speeds with high engine RPMs, heat dissipation becomes difficult, leading to vapor lock. If vapor lock occurs, stop the car immediately to cool down and troubleshoot the issue. 3. Prevent water shortage: In hot weather, water in the radiator evaporates quickly. Always check the coolant level and monitor the temperature gauge. If water shortage is detected, stop the car immediately, wait for it to cool down before refilling, and avoid opening the radiator cap immediately to prevent burns.
Was this review help?
20
0
Share
More Forum Discussions

Is the Toyota IZOA compliant with China 6 emission standards?

Toyota IZOA meets the China 6 emission standards. Below are the introduction and configuration details of the Toyota IZOA: Introduction to Toyota IZOA: It is positioned as a new-generation stylish SUV. Taking the Toyota IZOA as an example, its body dimensions are: length 4455mm, width 1845mm, height 1565mm, with a wheelbase of 2640mm, a fuel tank capacity of 50 liters, and a curb weight of 1505kg. Configuration details: The Toyota IZOA features a front MacPherson strut independent suspension and a rear E-type multi-link independent suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 171PS, a maximum power of 126kW, and a maximum torque of 203Nm, paired with a continuously variable transmission.
10
0
Share

Where to Add Windshield Washer Fluid in Baojun 510?

Facing the engine compartment, open the engine hood. In the lower right corner of the engine compartment, there is a white cap. This is where you add the windshield washer fluid. Open the white cap and pour in the washer fluid. You can add up to approximately 1.5 liters of washer fluid at a time. Windshield washer fluids are mainly divided into three types: 1. Summer-specific windshield washer fluid: This type of fluid contains added insect-removing agents in its original composition, allowing it to quickly remove insect residues from the windshield. 2. Standard winter windshield washer fluid: Also known as anti-freeze windshield washer fluid. This type generally ensures that it won't freeze or damage car components even when the external temperature drops below -20°C. 3. Special anti-freeze windshield washer fluid: This type can remain unfrozen even at -40°C, making it suitable for use in the extremely cold regions of northern China.
11
1
Share

Why Can't an EFI Motorcycle Accelerate Properly?

There could be several reasons why an EFI motorcycle fails to accelerate properly: 1. The fuel pump is not functioning correctly. 2. There is no pressure in the fuel line. 3. The ECU connectors are loose. 4. The cylinder temperature sensor is damaged. 5. The oxygen sensor is damaged. Here is some additional relevant information: 1. Deposits can clog the needle valve and valve holes of the fuel injector, affecting the performance of the precision components in the electronic fuel injection system and leading to reduced power output. 2. Deposits can form carbon buildup on the intake valves, causing them to not seal properly. This results in difficulty starting the motorcycle, unstable engine idling, increased fuel consumption accompanied by excessive exhaust emissions, and can also shorten the lifespan of the three-way catalytic converter.
16
5
Share

What to Prepare Before Applying for a Driver's License?

Applying for a driver's license requires preparing a series of documents and materials in advance. The details are as follows: 1. Document Requirements: Fill out the "Motor Vehicle Driver's License Application Form"; Original and photocopy of the applicant's ID card (photocopied on both sides of A4 paper); Temporary residents also need to prepare the original and photocopy of their temporary residence permit (photocopied on both sides of A4 paper); Three one-inch color passport photos with a white background; A medical examination certificate is required. 2. Examination Content: The test subjects include three items: traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving). 3. Notes: After completing the Subject 1 test, you must pass Subject 2 and Subject 3 within three years. If you fail to pass, the test content will be invalidated, and you will need to reapply for the Subject 1 test. Under the new regulations, both Subject 2 and Subject 3 offer five attempts. If you fail to pass within these five attempts, you must retake the Subject 1 test.
17
4
Share

What to Do If You Discover Your Vehicle License Has Been Expired for Two Years?

If your vehicle license has been expired for over two years, you will first receive penalty points and a fine, after which you can proceed with a re-examination. Below are the relevant details: 1. Required Materials: To renew an expired vehicle license, you should go to the vehicle management office to apply for a replacement. For the replacement, you need to bring the identity proof of the vehicle owner, standard photos of the vehicle, and the original expired vehicle license, which must be returned to the vehicle management office. 2. Expiration Consequences: If the vehicle license has expired, it is as if the vehicle does not have a license, and the vehicle cannot be driven on the road. If the vehicle is stopped by traffic police and found to have an expired license, the owner will be fined or the vehicle may be impounded. 3. Insurance Policy: In an insurance contract, a vehicle with an expired license is considered unqualified, and if an accident occurs, the insurance company will not provide compensation.
10
2
Share

How to Solve the Issue of Water Dripping from Diesel Engine Exhaust Pipe?

Water dripping from the diesel engine exhaust pipe does not require any treatment, as it is a normal phenomenon indicating that the engine is functioning properly with complete combustion and effective atomization. Every vehicle is equipped with a small opening at the bottom of each exhaust pipe to facilitate drainage under normal conditions or special circumstances like wading through water. The conditions for water dripping from the diesel engine exhaust pipe are: 1. The air-fuel mixture ratio must meet the normal value. For engines with electronic fuel injection or carburetors, a normal air-fuel mixture ratio signifies that the vehicle's fuel supply system is functioning correctly, and fuel consumption will remain within the normal range; 2. The engine cylinder pressure must be normal, meaning there is no significant wear inside the engine cylinder block, and components such as cylinder liners and sealing rings are intact; 3. The exhaust temperature must be normal. Most of the heat generated by the engine stays within the cylinder, with only a small portion reaching the exhaust pipe. Under these conditions, the engine's power output is relatively stable. If the exhaust pipe temperature is too high, the water vapor will evaporate.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.