What are the common issues with the steering gear of the new Excelle?

1 Answers
AnnaLee
07/29/25 4:15pm
The common issue with the steering gear of the new Excelle is the steering wheel not returning to center. The related solutions are: Adjust the four-wheel alignment: Generally, when a vehicle exhibits the phenomenon of the steering wheel not returning to center, the four-wheel alignment can be adjusted. Four-wheel alignment refers to the relative positional relationship between the wheels and the chassis (wheels, steering knuckle, front axle, etc.). If the four-wheel alignment parameters change, issues such as incorrect steering direction, heavy steering, steering deviation, and tire wear may occur. Replace the steering gear: If the steering wheel still does not return to center after adjusting the four-wheel alignment, then the cause can be ruled out as the four-wheel alignment. After excluding the four-wheel alignment, the most likely cause is the steering gear. When the steering gear malfunctions and the reverse efficiency decreases, the steering wheel will be difficult to return to center.
Was this review help?
6
0
Share
More Forum Discussions

Is a Large Wheel Driving a Small Wheel Faster or Slower?

A belt-driven large wheel driving a small wheel constitutes a speed-increasing transmission, resulting in higher rotational speed for the small wheel. Conversely, a small wheel driving a large wheel forms a speed-reducing transmission, with the large wheel rotating at a lower speed. Below are detailed explanations of relevant aspects: 1. Principle: The crankshaft pulley serves as the power source for driving other engine accessories, utilizing the drive belt to operate components such as the generator, water pump, power steering pump, and compressor. 2. Function: It drives the water pump, generator, and air conditioning compressor. The water pump ensures the normal operation of the engine's water circulation for cooling purposes, the generator charges the battery to maintain the proper functioning of various automotive circuits, and the air conditioning compressor operates the air conditioning system. 3. Advantages: Pulley transmission can mitigate load impacts, operates smoothly with low noise and vibration, features a simple structure that is easy to adjust, does not require the stringent manufacturing and installation precision of meshing transmissions, provides overload protection, and allows for a wide range of center distance adjustments between the two shafts.
14
1
Share

In which year did the Honda CR-V start using CVT transmission?

Honda CR-V began using CVT transmission across all models starting from 2016. The 2015 model year had already adopted CVT for other variants. From the 2016 model year onward, the entire lineup switched to CVT. Here's a brief introduction about the Honda CR-V: 1. Honda CR-V Overview: The Honda CR-V is an urban classic SUV model produced by Dongfeng Honda Automobile Co., Ltd. The new CR-V features a sporty and fashionable exterior design with excellent handling performance. 2. Powertrain: The Honda CR-V is equipped with recalibrated 2.0L and 2.4L engines. The 2.4L engine provides ample power with quick acceleration, making overtaking effortless. The 2.0L engine has relatively weaker power output with slower initial acceleration. The new CR-V uses Michelin LATITUDE-Tour series tires.
18
0
Share

How to conduct annual inspection for 11-year-old vehicles under new regulations?

For vehicles purchased in 2011, annual inspection was still required in 2020, as the new policy took effect on November 20, 2020. This means that only vehicles undergoing inspection after November 20, 2020 would receive a 2-year valid motor vehicle inspection certificate. Details are as follows: 1. New regulations: According to the new requirements, the scope of motor vehicles exempt from inspection has been expanded. In addition to the existing exemption for non-commercial mini and small passenger vehicles with 6 or fewer seats within 6 years, non-commercial mini and small passenger vehicles with 7 to 9 seats (excluding vans) within 6 years are now also included in the exemption. 2. New adjustment: For non-commercial mini and small passenger vehicles (excluding vans) over 6 years but under 10 years old, the inspection frequency has been adjusted from annually to once every two years.
11
1
Share

Where is the chassis number of the Sagitar located?

In the engine compartment near the coolant filler port, and it can also be seen on the front windshield facing the driver's seat. If there is a vehicle nameplate at the B-pillar position under the front passenger seat, the engine number and chassis number can also be found there. If you already have a driver's license, these numbers can also be seen on the license. Below is an introduction to the new generation Sagitar: 1. Body dimensions of the new generation Sagitar: The new generation Sagitar measures 4753mm in length, 1800mm in width, 1462mm in height, with a wheelbase extended to 2731mm. 2. Features of the new generation Sagitar: The new generation Sagitar is equipped with a leather multifunction steering wheel, a sliding panoramic sunroof, a Dynaudio premium sound system, a three-zone automatic air conditioning system, a Clean-air 2.0 air purification system, and an MIB infotainment system, among other features.
4
4
Share

How to Check the Expiration Date of Vehicle Annual Inspection?

There are two methods to check the expiration date of vehicle annual inspection: the vehicle inspection sticker and the Traffic Management 12123 App. According to regulations, the vehicle must apply for an inspection compliance mark or undergo on-site inspection within the specified time. Otherwise, if the inspection validity period is exceeded, the vehicle will be considered as having failed the inspection. Vehicle Inspection Sticker: If the vehicle received a paper inspection compliance mark during the last annual inspection, the expiration date of the annual inspection will be printed on the back of the compliance mark. For example, if the inspection validity period is until November 2021, the vehicle must undergo the annual inspection during September, October, or November when there is available time. Traffic Management 12123 App: Open the Traffic Management 12123 App, click to enter the "My Vehicle" page, and you can see the inspection validity period of the registered vehicle. Driving a vehicle that has failed the inspection poses the following risks: 1. If the vehicle is stopped by traffic police, it will be penalized according to the law and temporarily impounded; 2. If the vehicle is involved in an at-fault accident, the insurance company may refuse to compensate; 3. If the annual inspection is overdue for more than three inspection cycles, the vehicle will be forcibly scrapped.
13
1
Share

Which model is the Kawasaki Ninja?

Kawasaki Ninja 400. It is a motorcycle very suitable for entry-level riders, and this model has relatively strong overall performance, making it one of the more advantageous models among large-trade imported vehicles. Below is the relevant introduction: 1. Engine: The domestic Ninja 400 adopts a parallel twin-cylinder engine, with the 400cc displacement engine delivering a maximum power of 20.6kW (28Ps) at 8300rpm. The 450cc engine delivers a maximum power of 27kW (36.7Ps) at 8000rpm. The Jiajue N19 is equipped with a cool-tone LED LCD display, showing functions including mileage, fuel level, water temperature, and gear position. 2. Fuel consumption: After exceeding 120km/h, the acceleration process of the domestic Ninja becomes somewhat slow. If the bike is continuously driven at maximum speed, the fuel consumption will become particularly high, and the larger the displacement, the higher the fuel consumption at maximum speed.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.