What are the common issues with the National IV Fazer 150?

1 Answers
SadieLynn
07/28/25 3:12pm
The common issues with the National IV Fazer 150 include: 1. Difficulty in achieving high RPM during cold starts; 2. Unresponsive throttle; 3. Abnormal engine noises. The reasons why a motorcycle fails to start after being idle for a long time are: 1. The gasoline inside the carburetor evaporates or deteriorates, preventing the fuel entering the cylinder from burning properly, thus failing to start; 2. The engine oil on the piston rings flows into the oil pan, reducing the sealing performance of the piston rings and causing insufficient cylinder pressure, leading to failure to start. Taking the Yamaha Fazer as an example, its body dimensions are: length 2015mm, width 745mm, height 1095mm, wheelbase 1330mm, fuel tank capacity 14L, and curb weight 128kg.
Was this review help?
8
2
Share
More Forum Discussions

Has the Yuexiang V3 been discontinued?

Yuexiang V3 has been discontinued. The specific introduction of Yuexiang V3 is as follows: Yuexiang V3 powertrain: The Yuexiang V3 is equipped with two engines, one is a 1.3L naturally aspirated engine, and the other is a 1.4L naturally aspirated engine; both the 1.3L and 1.4L naturally aspirated engines are paired with a 5-speed manual transmission; the front suspension of the Yuexiang V3 uses a MacPherson independent suspension, while the rear suspension uses a multi-link independent suspension. Current status of Yuexiang V3: Yuexiang V3 is a compact car under Changan Automobile, and it had very good sales and reputation when it was first launched. However, it was discontinued in 2017, and its car information has been removed from Changan Automobile's official website. The latest model currently available on the market is the 2015 Yuexiang V3.
2
1
Share

Can Automatic Transmission Cars Coast in Neutral?

Automatic transmission cars should not be shifted into neutral, as coasting in neutral can damage the automatic transmission. There are three common misconceptions about using automatic transmissions: Keeping the car in D gear during prolonged stops: Forcing the car to stop its slight forward movement can cause the transmission fluid temperature to rise. Automatic transmission cars usually have a slight forward creep. If the brake pedal is held down for a long time, it forcibly stops this movement, leading to increased transmission fluid temperature and faster fluid degradation. This is especially harmful when the air conditioning system is running and the engine is idling at a higher speed. Shifting into N gear while driving at high speeds or going downhill: This can potentially burn out the transmission. When the transmission output shaft is rotating at high speed while the engine is idling, the transmission oil pump cannot supply sufficient oil, resulting in poor lubrication conditions.
4
5
Share

How Long Does It Generally Take to Learn Car Detailing?

3 months to half a year. First, it depends on the learning method—whether you're learning as an apprentice or at a professional auto repair school. As an apprentice, if you're quick-witted, observant, and willing to work with your hands, it will take at least three years. This is because masters usually don’t pass on their unique skills to apprentices. At crucial moments, they might send the apprentice to fetch tools or do other tasks, often keeping them sidelined, which can be a waste of time. You might not learn the most refined techniques this way, so attending a professional school is a better option. The typical learning duration for car detailing is as follows: at a school, it usually takes only 2 to 3 months.
17
5
Share

What are the tips for reversing into the garage in Subject 2?

The tips for reversing into the garage in Subject 2 are as follows: 1. Right reverse and straighten: The premise is to control the speed well and avoid stopping. If you are about to press the right line, straighten the front of the car. If you are about to press the left line, continue to turn the steering wheel to the right until it is almost parallel, then straighten the steering wheel. If you still press the line, you should either act earlier or speed up the steering wheel movement. 2. Left reverse and straighten: If you are about to press the left line, straighten the front of the car and wait for the rear wheels to enter before turning the steering wheel to the left for appropriate adjustment. If you are about to press the right line, continue to turn the steering wheel to the left until it is almost parallel, then straighten the steering wheel. If you still press the line, you should either act earlier or speed up the steering wheel movement.
5
0
Share

Which region does the license plate 'Lu K' belong to?

Lu K is the license plate for Weihai City, Shandong Province. 'Lu' is the Chinese character abbreviation for Shandong Province, and 'K' is the vehicle management office code for Weihai City. Here is some relevant information: 1. License plates, commonly known as car plates, not only represent the region to which the vehicle belongs but also allow the owner and registration information of the vehicle to be traced based on the plate. 2. If you accidentally scratch the license plate and it affects daily recognition, you should bring the necessary documents (the vehicle owner's ID card, the original license plate, the 'Motor Vehicle License Plate Application Form,' etc.) to the vehicle management office to apply for a replacement. Otherwise, driving with a damaged license plate will result in a 12-point deduction.
9
4
Share

What does the P button on a car mean?

The P button in a car is the on/off switch for the reverse radar. The reverse radar in a car is usually turned on by default. If the driver feels that the reverse radar prompts are unnecessary, they can press this button to turn off the reverse radar function. The full name of the reverse radar is "reverse collision avoidance radar," also known as "parking assist device." It can inform the driver about surrounding obstacles through sound or more intuitive displays, helping to eliminate blind spots and unclear vision, thereby improving driving safety. Here is some related information: 1. The P symbol on the dashboard. The symbol is: a circle with a P in the middle, and parentheses on both sides of the circle. The entire symbol is red, indicating the parking brake indicator. It shows whether the parking brake (handbrake) is engaged. When the parking brake (handbrake) is pulled up, the indicator light turns on, and when the handbrake is released, the indicator light turns off. Models equipped with an electronic handbrake will have a button with this symbol in the gear lever area. 2. The P on the gear shift. Some models will display a P on the dashboard when the P gear is engaged. P gear, short for "parking," is the parking gear. It is generally used when turning off and parking the vehicle. Many vehicles need to be in P gear to power off, remove the key, and lock the doors. After engaging the P gear, the vehicle's braking device will be locked.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.