What are the common issues with the CT5?

1 Answers
DiKaylee
07/29/25 9:19pm
The CT5 has two common issues: noticeable jerking when shifting gears in cold conditions and engine mount resonance. The CT5 comes in body colors such as Jade Purple, Phantom White, Neon Red, Frost Gray, Gloss Black, and Gloss Blue. It is a midsize 4-door 5-seater sedan with body dimensions of 4924mm in length, 1883mm in width, and 1453mm in height, featuring a wheelbase of 2947mm and a fuel tank capacity of 66 liters. The CT5 is equipped with a 2.0T turbocharged engine and a 10-speed automatic transmission, delivering a maximum power of 174kW and a maximum torque of 350Nm. It utilizes a MacPherson strut front suspension and a multi-link independent rear suspension.
Was this review help?
18
0
Share
More Forum Discussions

Should the speed be increased to over 60 after entering the ramp?

Vehicles must accelerate to over 60 on the ramp, and then turn on the left turn signal to enter the traffic lane under the premise of ensuring safety; if there are vehicles closely following on the traffic lane, you cannot directly enter the traffic lane. Relevant introductions are as follows: Increase speed: On the ramp (when entering), quickly increase the vehicle speed, but do not exceed the speed limit indicated by the signs. On the ramp, overtaking, U-turns, parking, and reversing are not allowed. Choose the right moment: After driving the vehicle from the ramp into the highway acceleration lane, turn on the left turn signal, increase the speed to over 60 kilometers per hour as soon as possible, and carefully observe the traffic conditions on the lane to choose the right moment to enter the traffic lane.
4
3
Share

What brand of engine does Maserati use?

Maserati's entire lineup is equipped with a 4.7-liter V8 naturally aspirated engine. Here is the relevant introduction of the 2021 Maserati Ghibli: 1. The Maserati GT is a grand tourer under the Maserati brand, with body dimensions of 4974mm in length, 1945mm in width, and 1484mm in height, a wheelbase of 2998mm, a fuel tank capacity of 80 liters, and a curb weight of 2020kg. 2. The 2021 Maserati Ghibli features a double-wishbone independent front suspension and a multi-link independent rear suspension. 3. The Maserati GT is powered by a 2.0T turbocharged engine, delivering a maximum horsepower of 330PS, a maximum power of 243kW, and a maximum torque of 450Nm, paired with an 8-speed automatic transmission.
14
5
Share

What Causes the Oil Light to Illuminate When There is Sufficient Engine Oil?

The reasons for the oil light illuminating when there is sufficient engine oil are: 1. Clogged oil passages; 2. Low oil viscosity; 3. Issues with the oil pump; 4. Problems with the oil sensor; 5. Electromagnetic interference. The functions of engine oil include: 1. Lubrication and friction reduction; 2. Assisting in cooling and temperature reduction; 3. Sealing and preventing leaks; 4. Rust and corrosion prevention; 5. Shock absorption and cushioning. The steps for changing engine oil are: 1. Lift the vehicle, remove the undercarriage shield, and place a container of about 10 liters beneath the oil drain plug; 2. Unscrew the oil drain plug, use an air gun to blow for two minutes at the oil filler port, then tighten the drain plug after draining and wipe it with a tissue to check for leaks; 3. Reinstall the undercarriage shield, lower the vehicle, and use a funnel to add oil through the filler port.
18
2
Share

What are the steps for upgrading the infotainment system of the 2017 Haval H6?

The steps for upgrading the infotainment system of the 2017 Haval H6 are: 1. Turn the ignition key to the power-on position; 2. Select 'Full Upgrade' on the screen; 3. Do not operate any buttons on the navigation screen during the upgrade process; 4. After the progress bar completes, a prompt will indicate a successful upgrade; 5. Start the vehicle and reopen the navigation system. The 2017 Haval H6 has a body size of 4615mm in length, 1860mm in width, and 1720mm in height, with a wheelbase of 2680mm and a body weight of 1675kg. The front suspension is a MacPherson independent suspension, and the rear suspension is a double-wishbone independent suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum torque of 210Nm, and a maximum power of 110kW, paired with a 6-speed manual transmission.
3
5
Share

What are the symptoms of engine blow-by?

The symptoms of engine blow-by are: 1. Decreased engine power; 2. Deterioration of engine oil; 3. Engine failure to start, with blow-by at the valve cover and white smoke emitting from the crankcase oil filler port. The causes of engine blow-by include: 1. Piston rings being misaligned, broken, or worn out, leading to ineffective operation and poor cylinder sealing; 2. Excessive clearance in piston ring gaps, side gaps, or back gaps; 3. Improper installation of the air filter or a damaged filter element, causing large amounts of dust and impurities to be drawn into the cylinder and resulting in wear; 4. Cylinder head bolts not tightened to standard torque, leading to poor sealing of the cylinder gasket and gas escaping from the engine; 5. Poor sealing between the valves and valve seats; 6. Severe lack of coolant in the cooling system, causing a rapid rise in temperature, adhesion between the piston and piston rings or cylinder liner, and extensive scoring on the piston surface.
7
4
Share

What is the size of the Lavida's front windshield?

The size of the Lavida's front windshield is 124 centimeters in length and 75 centimeters in height. The main types of automotive front windshields include laminated glass, tempered glass, zoned tempered glass, laminated tempered glass, and laminated zoned tempered glass. Notes on windshield repair: Do not wash the car and try to drive on flat roads within two days after replacing the glass. Before repairing the car glass, thoroughly remove all dirt from the windshield. Carefully selecting cleaning agents and related cleaning products is a good choice. Turn off the defrosting and heating function after 5-10 minutes of use, otherwise it may cause the windshield to crack. Repair cracks no longer than twenty centimeters, as the safety factor after repair is not as high as the original. After the repair, the effect may seem good, but after a while, the crack appears again: the most common reason is overheating. Heating the glass to 26--32°C is the most suitable temperature. Beyond this temperature, the glass will expand, squeezing out the resin. At that time, it may seem like the repair is successful, but in reality, part of the resin in the crack has overflowed. When the glass cools down, the crack will reappear.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.