What are the common issues with the 4G69 engine?

1 Answers
LawsonDella
07/29/25 4:26pm
4G69 engine's most significant drawback is: when the engine speed exceeds 3000 RPM, the noise increases sharply, and the generator bearing produces sounds, making it very uncomfortable. 1. 4G69 engine: It is an engine produced by Mitsubishi of Japan. 2. Advantages: The 4G69 comes in both domestic and imported versions. The 4G69 engine is a relatively new engine introduced in recent years. Its advantage is that it is more advanced than the 4G64, with good power output. Since this engine is installed in SUVs or MPVs, it has slightly higher fuel consumption, performs poorly at high speeds, but has strong low-speed torque. 3. Technology: The 4G69 engine is a very mature, low-failure-rate, and powerful engine. Maintenance is also affordable, and the 4G69 engine is used in many vehicle models. Great Wall's Haval H3 is equipped with this engine.
Was this review help?
8
3
Share
More Forum Discussions

Where is the cigarette lighter fuse located in the Mazda6?

The cigarette lighter fuse in the Mazda6 is located inside the fuse box near the driver's left foot. Here is some information about the cigarette lighter: 1. The cigarette lighter is a component found in all cars, designed to provide a flame source for smokers. 2. Some cigarette lighter sockets remain powered even after the car is turned off, so it's better to plug and unplug devices as needed. When plugging or unplugging devices, avoid shaking them too forcefully, as this can lead to poor contact during subsequent use. In more severe cases, it may cause a short circuit, resulting in the fuse and external device burning out. Therefore, always remove devices vertically. 3. Remember to regularly clean the cigarette lighter socket to remove any foreign objects. Never allow conductive materials such as metal objects or liquids to enter, as this can cause short circuits and fuse blowouts.
3
5
Share

What Causes Abnormal Noise and Failure to Start When Igniting the Car?

The reasons for abnormal noise and failure to start when igniting the car are: insufficient battery power or low voltage. 1. Before turning off the car, forgetting to turn off the headlights or some electrical equipment may cause the battery to drain, resulting in insufficient power. 2. If the battery has been used for too long and is severely aged, the voltage may be insufficient, requiring replacement. Additional information: The method to determine whether the battery has sufficient power is: Turn the ignition key to the ON position (for push-button start models, press the start button twice without stepping on the brake), turn on the headlights, and observe if the light dims significantly or does not light up at all. You can also press the horn; if the sound is noticeably weaker than usual or does not sound at all, it can be concluded that the battery power is insufficient.
12
1
Share

What does AUTO-H mean on a BMW car?

The AUTO-H button indicator in the car refers to the automatic parking function equipped on BMW vehicles. When waiting at a traffic light, after stepping on the brake to stop the vehicle, this function will automatically engage the parking state, eliminating the need for the driver to keep pressing the brake pedal for a long time. To move again, simply press the accelerator pedal. Here is a brief introduction about AUTO-H: 1. The AUTO-HOLD system in cars is also known as the automatic parking assistance system. Its main function is to automatically determine the vehicle's specific state, pre-tension the electronic parking brake, and thus serve the purpose of parking. 2. This function has an independent button for activation and deactivation on vehicles equipped with an electronic parking brake. The AUTO-HOLD button is located behind the electronic parking brake. To use it, first press this button until the indicator light comes on, and the system will officially enter standby mode.
20
2
Share

Does the Cavalier have tire pressure monitoring?

The Cavalier's Xinyue and Xinshang trims come equipped with a tire pressure monitoring system. The tire pressure monitoring system functions by automatically monitoring the tire pressure in real-time while driving and alerts the driver in case of tire leaks or low pressure to ensure driving safety. Here is more information about the tire pressure monitoring system: 1. There are two main types of tire pressure monitoring systems: one is the indirect type (Wheel-Speed-Based TPMS, WSB), which uses the wheel speed sensors of the car's ABS system to compare the rotational speed differences between tires. The other is the direct type (Pressure-Sensor-Based TPMS, PSB). 2. This system uses pressure sensors installed in each tire to directly measure the tire pressure and transmits the pressure information from inside the tire to a central receiver module via wireless transmitters, then displays the tire pressure data for each tire. The system will automatically alert the driver when the tire pressure is too low or there is a leak.
15
3
Share

Does the Sylphy have ISOFIX interfaces?

The Sylphy is equipped with ISOFIX interfaces. They are located in the crevice between the backrest and the seat cushion of the rear seats, as well as at the upper rear part of the seats. The installation method for the ISOFIX fixation is as follows: 1. Simply align the ISOFIX interface of the child safety seat with the reserved slot on the seat, insert it, and then raise the support rod to complete the installation. 2. If the car does not have ISOFIX interfaces, you can use the LATCH interface for fixation or install ISOFIX interfaces yourself on the rear seats of the car. 3. Compared to the simple ISOFIX interface, LATCH solves the problem of no top fixation and, due to its non-rigid connection, has more lenient requirements for the anchor point positions of the car seats. 4. Locate the LATCH interface position and secure the hook strap to the car's LATCH interface.
5
2
Share

How to Replace the Air Conditioning Filter in Golf 7?

Golf 7 air conditioning filter replacement steps are as follows: 1. First, remove the air conditioning and pull out the entire glove box. 2. Locate the air conditioning filter cover at the bottom of the center console, uncover the cover to see the air conditioning filter inside, and replace it with a new one. Tips for air conditioning filter replacement: 1. If the airflow from the air conditioner is significantly reduced, the air conditioning filter may be clogged. First, clean the filter, or replace it if necessary. 2. The frequency of cleaning depends on road conditions (dusty roads, etc.). 3. The air conditioning filter should be properly installed in its place. 4. Using the air conditioner when the filter is removed may degrade dustproof performance and affect air conditioning performance. 5. In cities with poor air quality, it is recommended that car owners replace the air conditioning filter twice a year to ensure health.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.