What are the common issues with the 2013 Santa Fe 4WD?

1 Answers
SanLena
07/29/25 5:20pm
The common issues with the 2013 Santa Fe include: engine noise, poor air conditioning cooling performance, high fuel consumption, and stiff suspension. Below is an extended introduction: Vehicle Overview: The 2013 Santa Fe is a mid-size SUV under Beijing Hyundai, with body dimensions of 4725mm in length, 1880mm in width, and 1686mm in height, and a wheelbase of 2700mm. Powertrain Overview: It is equipped with a 2.4L naturally aspirated engine. The all-new Santa Fe is a premium full-size luxury SUV under Beijing Hyundai, featuring a 2.0TGDI direct-injection turbocharged engine, a 2.4GDI direct-injection engine, a 6-speed automatic transmission, four-wheel independent suspension, an intelligent electronic 4WD system, and a Flexible Steering System (FlexSteer).
Was this review help?
19
1
Share
More Forum Discussions

What are the impacts of idling the car for 10 minutes to warm up?

The impacts of idling the car for 10 minutes to warm up include: 1. Increased fuel consumption; 2. More carbon deposits; 3. Air pollution. The harm of not warming up the car is: Engine wear, as the engine oil settles at the bottom when the car is cold, leaving the engine internals in a state of dry friction. The method to warm up the car is: After starting the vehicle, let it idle for 1 to 2 minutes until the engine coolant reaches normal temperature, then you can drive. The purposes of warming up the car are: 1. After the car has been parked for a long time, the engine oil flows back into the oil pan, leaving the upper part lacking lubrication. Warming up the car serves to lubricate it; 2. When the engine has not reached its operating temperature, the fuel supply system cannot effectively vaporize the gasoline completely due to the low temperature. Warming up the car can improve efficiency; 3. It helps the transmission gear oil to lubricate the upper part of the transmission.
11
3
Share

How to repair a single broken window button?

If the window button is damaged and cannot be repaired, it must be replaced at a 4S shop or repair shop. Functions of the car window: 1. Shelter from wind and rain, and reduce noise; 2. Reduce wind resistance and guide airflow; 3. Protect the safety of passengers. Methods for maintaining car windows: 1. Use glass water according to the season; 2. Apply car window heat insulation film. Methods for cleaning car windows: 1. Pour water from the top of the vehicle and wipe off dirty water with a sponge; 2. Spray glass cleaner evenly on the glass with a high-pressure spray bottle; 3. Carefully dry the water with a soft cloth.
11
5
Share

How often should a China 5 diesel fuel filter be replaced?

China 5 diesel fuel filters need to be replaced after approximately 10,000 to 20,000 kilometers of driving. The maintenance tasks include: 1. Replacing engine oil and oil filter, cleaning the air filter, and checking whether the generator belt and wiper blades are damaged; 2. Checking whether the levels of various fluids are normal; 3. Verifying whether all switches and lights in the vehicle are functioning properly; 4. Checking whether the tire pressure is normal and whether there is uneven wear, bulging, or damage on the tires. The benefits of vehicle maintenance include: 1. Ensuring the vehicle remains in excellent performance condition; 2. Improving vehicle efficiency and reducing wear on parts and tires; 3. Enhancing driving safety; 4. Preventing potential hazards caused by vehicle issues; 5. Reducing noise and environmental pollution; 6. Maintaining the vehicle's exterior cleanliness and preventing damage.
4
5
Share

Does the six-speed manual-automatic transmission belong to AT or CVT?

Six-speed manual-automatic transmission belongs to the AT transmission. The six-speed manual-automatic transmission refers to a gearbox that combines six-speed manual shifting with automatic shifting. Manual-automatic transmission means integrating manual gear shifting and automatic gear shifting in a car. Essentially, a manual-automatic transmission is still a type of automatic transmission, simulating the operation of a manual transmission through an electronic control system. How to start the transmission: The car can only be started in P or N gear. To shift out of P gear, the brake must be pressed. Usage of N gear start: When the vehicle is to be driven forward immediately after starting, you can first turn on the power (without starting the engine), press the brake, shift to N, then ignite, and subsequently shift to D gear to drive forward directly. This avoids the reverse impact on the transmission when shifting from P gear through R gear after ignition. Another function is that in case of sudden engine stall while driving, you can quickly shift to N gear to restart the engine, ensuring safety. Remember never to shift into N gear for coasting in an automatic transmission car. Many people coast in neutral with manual transmissions, but never do so with an automatic transmission. Also, never shift into P gear while driving an automatic transmission car.
14
0
Share

Where is the fuel tank cap switch on the Borgward BX5?

The fuel tank cap switch on the Borgward BX5 is located under the driver's seat. Pull it upwards to open the fuel tank cap. Taking the 2020 Borgward BX5 as an example, it is a compact SUV with body dimensions of 4490mm in length, 1877mm in width, and 1675mm in height, with a wheelbase of 2685mm and a curb weight of 1525kg. The 2020 Borgward BX5 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum torque of 250Nm, and a maximum power of 110kW.
7
2
Share

What Causes the Squeaking Noise in the Magotan's Chassis?

The reasons for the squeaking noise in the Magotan's chassis are: 1. Exhaust or engine malfunction; 2. Aging of the shock absorber top buffer block and lower control arm rubber bushing; 3. Damage to the stabilizer bar link; 4. Loose chassis suspension system. The function of the car chassis is to support and install the car engine and its various components and assemblies, forming the body shape, receiving the engine's power to make the car move and maintain normal driving. The composition of the car chassis: It consists of the transmission system, steering system, running system, and braking system. Maintenance methods for the car chassis: 1. Regularly check the oil condition of important assemblies; 2. Pay attention to the wear of brake pads and clutch plates; 3. Perform four-wheel alignment periodically; 4. Monitor tire pressure and wear condition.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.