What are the common faults of FAW-Volkswagen?

2 Answers
StephenRose
07/28/25 9:11pm
Detailed introduction is as follows: 1. Engine light on, lack of power at high speed: The computer reads fault code 00665 in the engine system - boost pressure control not reaching the control limit (static). Entering engine data stream 01-08-115 to read boost measurement values shows no abnormality. In this case, focus should be on checking the vacuum control device of solenoid valve N75, as blockage in the vacuum pipeline at the low-pressure end leads to poor high-speed regulation and lack of power. 2. Air conditioning not cooling: Check shows normal refrigerant level with no system fault codes. Reading air conditioning data stream group 1 zone 1 displays code: 8, indicating ambient temperature too low. Data stream group 4 zone 2 shows 0 degrees, which sufficiently explains that the air conditioning not working is mainly caused by the system detecting ambient temperature too low (below 3 degrees). In this case, first disconnect the battery terminal for 30 seconds to reset the system. If not restored, then check the sensor and related circuits. 3. Sagitar 1.6 engine light alarm: Computer detection shows fault code 16795 - secondary air injection system not detecting correct air flow (intermittent). Checking other major data reveals no abnormalities. Conducting self-diagnosis test on the secondary air pump shows normal operation. This situation is mostly caused by blockage in the mechanical combination valve (common issue).
Was this review help?
4
5
Share
VonErin
08/12/25 1:52am
I've driven several FAW-Volkswagen vehicles, with common issues including minor electrical system glitches, such as sensors randomly triggering warning lights, causing the dashboard to constantly flash errors. The engine may burn oil, especially in the EA888 models, so it's essential to regularly check the oil level to avoid damage. The DSG transmission exhibits noticeable jerking in stop-and-go traffic, accompanied by rattling noises. Insufficient air conditioning cooling is also not uncommon, possibly due to refrigerant leaks or compressor failure. Suspension wear leads to loud noises over bumpy roads, making the ride uncomfortable. Ignoring these problems can lead to more severe issues. It's recommended to have a comprehensive check-up at the 4S店 annually and drive gently, avoiding sudden acceleration to minimize wear and tear.
Was this review help?
8
0
Share
Expand All
More Forum Discussions

How Long Does It Take for Soy Milk Spilled in the Car to Lose Its Smell?

Soy milk spilled in the car generally loses its smell about 5 days after thorough cleaning. Additionally, if the car owner stays in the car for a long time with the windows closed and the air conditioning set to recirculate, there is a risk of hypoxia or carbon monoxide poisoning. Therefore, when sitting in the car for extended periods, it is advisable to switch the air conditioning to external circulation to allow air exchange between the inside and outside of the car, or simply open the car windows for ventilation. Below are methods to eliminate odors inside the car: Open the doors for ventilation: After the interior temperature rises, open the doors for ventilation. Open the opposite door as well for quick air exchange. Use air freshener: After the interior temperature cools down, spray air freshener. Remove the source of the odor: Identify and clean the source of the odor in the car, then wash it with cleaning solution. Spray perfume: Spray your favorite perfume inside the car. Place orange peels: Place orange peels inside the car; they can absorb odors and purify the air.
12
2
Share

What is the fuel consumption difference between 2.0 and 2.0T?

If the displacement and number of cylinders are the same, there is no significant difference in fuel consumption between a 2.0 and a 2.0T engine. It largely depends on how the driver operates the vehicle. Of course, turbocharged engines generally operate at lower RPMs. When the turbo kicks in, the vehicle can achieve higher speeds with less throttle input while delivering greater power. Therefore, turbocharged vehicles might be slightly more fuel-efficient, but the difference is negligible. However, they do offer significantly stronger power, though they come with higher maintenance costs in the long run. Below is an introduction to turbocharged engines: Principle: A turbocharger is essentially an air compressor that increases air intake by compressing air. It utilizes the inertial force of exhaust gases expelled by the engine to drive a turbine in the turbine chamber, which in turn drives a coaxial impeller. The impeller then compresses air delivered from the air filter pipe, forcing it into the cylinders under increased pressure. Power: As the engine speed increases, the speed of exhaust gas expulsion and the turbine rotation also increase. This allows the impeller to compress more air into the cylinders. The increased air pressure and density enable the combustion of more fuel. By adjusting the fuel supply and engine speed accordingly, the engine's output power can be enhanced.
12
0
Share

How Many Gears Does a Handbrake Have?

Generally, a handbrake has three gears. This is because the tightness of the handbrake cable varies when pulling it, resulting in different levels of braking force applied under different circumstances. Below is some relevant information about handbrakes: Principle: The professional term for a handbrake is an auxiliary brake, which operates differently from the main brake system. It uses a steel wire cable connected to the rear brake shoes to apply braking force to the vehicle. Prolonged use of the handbrake can cause the steel wire to undergo plastic deformation. Since this deformation is irreversible, long-term use will reduce its effectiveness and increase the handbrake's travel distance. Supporting Tools: A return spring is used in conjunction with the handbrake. When the handbrake is engaged, the spring is stretched; when released, the spring returns to its original length. With prolonged use, the spring may also undergo corresponding deformation.
16
3
Share

What are the scoring criteria and detailed rules for reverse parking?

Scoring criteria and detailed rules for reverse parking: Failure to follow the prescribed route or sequence results in disqualification. If the vehicle body crosses the line or fails to enter the parking space, it is disqualified. Exceeding 210 seconds without completing reverse parking results in disqualification. Stopping midway deducts 5 points each time. Reverse parking operation tips: Control the driving speed by using first gear or reverse gear at idle speed throughout the process. Maintain the same speed as when starting. Control the steering timing by carefully observing during the reversing process, mastering the key points of steering, and turning at the right moment. Control the driving route during the test, as the vehicle's path mainly depends on the speed of steering wheel rotation and driving speed. When reversing, accurately observe the boundary lines and correct the direction in time to keep the vehicle straight while entering the parking space. Precautions: To master reverse parking skills, pay attention to speed control—slow speed and quick steering are key points. When reversing, learn to observe the relationship between the vehicle body and the parking lines through the rearview mirror, ensuring the driving route is visible in the mirror.
10
2
Share

Why Can't the Electric Vehicle Charge?

Here are the reasons why an electric vehicle cannot charge: Battery lifespan issue: Generally, the battery's service life is 3-5 years, but incorrect charging methods may also lead to premature battery failure. Therefore, when you find that the battery cannot be charged, you should go to an electric vehicle repair shop for inspection and timely replacement or repair. Charger fuse breakage: If the fuse in the electric switch is broken, it will definitely prevent charging. Similarly, if the fuse inside the battery is broken, it will naturally prevent charging. In this case, you should go to a specialty store to replace the fuse, and never try to fix it yourself. Poor contact at the socket: When there is poor contact between the fuse tube and the fuse holder, when the charger and power source have poor contact, or when the plug and socket have poor contact, it will affect the normal charging of the electric vehicle, resulting in the battery not being charged or not being fully charged.
19
0
Share

What are the markings that allow U-turns on the road?

On the road, the markings that allow U-turns are two yellow lines in the center of the road. The left yellow line is a solid yellow line, and the right yellow line is a dashed yellow line, indicating that a U-turn is permitted. Below is an introduction to situations where U-turns are not allowed and where they are permitted. Situations where U-turns are allowed: There is a U-turn sign at the intersection; there are no explicit signs prohibiting U-turns or left turns at the intersection; within the yellow grid line area. Situations where U-turns are not allowed: Places with no U-turn signs; when driving on a one-way street, U-turns are not allowed; road guidance markings do not permit U-turns, and if only a straight arrow is marked on the left, U-turns are not allowed; intersections where the center of the road has a solid yellow line do not allow U-turns; U-turns are not permitted on auxiliary roads.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.