What are the common faults and causes of automatic transmissions?

How to Avoid Mistaking the Brake and Accelerator Pedals?

Methods to avoid mistaking the brake and accelerator pedals are as follows: Do not place both feet on the ground; instead, place one foot on the brake pedal. Below is an introduction to brakes: 1. Brake Pads: Also known as brake linings, in a car's braking system, brake pads are the most critical safety components. The effectiveness of all braking depends decisively on the brake pads. Brake pads are generally composed of a steel plate, an adhesive insulation layer, and a friction block, where the insulation layer is made of non-heat-conducting materials to provide thermal insulation. 2. Friction Block: Composed of friction materials and adhesives, it is pressed against the brake disc or drum during braking to generate friction, thereby achieving the purpose of vehicle deceleration and braking.

4

1

Share

How to Depress the Clutch When Parking on an Uphill?

Here is the relevant introduction on how to depress the clutch when parking on an uphill: 1. When the speed is fast, brake first and then depress the clutch: Braking with the brake pedal is equivalent to the simultaneous action of the braking system and the engine braking system. When the engine speed reaches idle, depress the clutch to downshift to prevent the engine from stalling. 2. When the speed is slow, directly depress the clutch: If the speed is slow, such as in 1st or 2nd gear, it is also acceptable to directly depress the clutch for braking. Note: Sometimes, when approaching a traffic light intersection or when the brake lights of the car in front are on, simply easing off the accelerator can slow down the car. If it is confirmed to be safe to proceed, neither the brake nor the clutch needs to be depressed.

10

2

Share

How to Identify Whether a Car Meets China 5 or China 6 Emission Standards?

You can check whether your vehicle meets China 5 or China 6 emission standards by referring to the vehicle acceptance form or by querying the vehicle's model number on the environmental protection website. Below are the relevant details about China 5 and China 6: 1. Identification: The China 5 emission standard is marked with a "V", while the China 6 emission standard is marked with a "Ⅵ", both using Roman numerals. 2. Fuel Neutrality: The "China 6" standard adopts the principle of fuel neutrality, meaning that the emission limits are the same regardless of the type of fuel used. In contrast, during the previous "China 5" phase, diesel and gasoline vehicles had different emission standards.

8

2

Share

What happens if the car in front suddenly brakes and causes a rear-end collision?

The rear-end collision caused by the sudden braking of the car in front is the full responsibility of the following car. Here are some related tips for preventing rear-end collisions: 1. Maintain a safe distance: When driving at high speeds exceeding 100 km/h, keep a safe distance of more than 100 meters from the car in front. On highways, each dashed lane divider line is 6 meters long, with a 9-meter gap between lines. The distance between two white lines plus the gap in between is 21 meters, which drivers can use as a simple way to judge the distance. 2. Observe road conditions: When there are not many vehicles in the overtaking lane, slightly move towards the overtaking lane. This habit helps you see farther ahead, allowing you to take timely measures in case of accidents, traffic jams, or other sudden situations. Additionally, avoid following cars that are very tall or have dark tinted windows. 3. Alert the car behind: An important driving technique is to alert the car behind you to effectively prevent rear-end collisions. Regularly check the car behind you; if you feel it is following too closely, lightly tap your brakes to alert them. If traffic ahead is dense and moving slowly, turn on your hazard lights to remind the car behind to slow down.

4

Share

Are all SUVs fuel-consuming?

SUVs generally consume more fuel compared to sedans. Here are specific methods to reduce fuel consumption: 1. Lightly press the accelerator: Fuel consumption peaks when the car starts at low speeds, so gently pressing the accelerator during startup to prevent excessively high RPM can effectively reduce fuel consumption. 2. Avoid high RPM: Try to avoid unnecessary high RPM as fluctuating engine speeds can significantly increase fuel consumption. 3. Regular maintenance: Change the engine oil and remove carbon deposits. 4. Avoid sudden braking: Anticipating road conditions in advance not only improves driving safety but also saves fuel, such as gradually slowing down before traffic lights and utilizing inertia to glide.

5

4

Share

Is the SF90 Stradale a New Energy Vehicle?

SF90 Stradale adopts a plug-in hybrid system, making it a new energy vehicle. Here is some relevant information about the SF90 Stradale: 1. Launch Time: In October 2019, the 2020 SF90 Stradale was launched, meeting the China VI emission standards. It is a 2-door, 2-seater hardtop sports car. 2. Drivetrain: The 2020 SF90 Stradale features a conventional mid-engine layout with an all-electric four-wheel-drive system. 3. Engine: The 3.9T engine in the 2020 SF90 Stradale is a brand-new engine, including components like the cylinder block, pistons, connecting rods, and crankshaft.

15

0

Share

What are the common faults and causes of automatic transmissions?

How to Avoid Mistaking the Brake and Accelerator Pedals?

How to Depress the Clutch When Parking on an Uphill?

How to Identify Whether a Car Meets China 5 or China 6 Emission Standards?

What happens if the car in front suddenly brakes and causes a rear-end collision?

Are all SUVs fuel-consuming?

Is the SF90 Stradale a New Energy Vehicle?

What to Do When the Car Key Won't Open or Turn the Lock?

How to Deal with Water Leakage in Rear Tail Lights?

What are the penalties and points for overloading a minivan?

What role does ABS play during emergency braking?