What are the common causes of frequent electronic power steering issues in the Hongguang S?

What to Do When Brakes Fail During Descent?

During a downhill drive, failure of the service brake refers to the foot brake malfunction. In such cases, engine braking can be used to decelerate the vehicle to a stop. In emergency situations, the vehicle can also be stopped by scraping against roadside obstacles to prevent more severe accidents. More details are as follows: 1. If the service brake fails, the parking brake can be utilized. It is advisable to use engine braking during downhill driving. Parking brake operation involves stopping the vehicle using the handbrake, but it is not absolutely necessary to pull the handbrake to its limit; gently applying the handbrake can also achieve appropriate deceleration. 2. Engine braking refers to lifting the accelerator pedal without depressing the clutch, utilizing the compression resistance, internal friction, and intake/exhaust resistance generated by the engine's compression stroke to create a braking effect on the drive wheels. Engine braking slows the vehicle through the engine's drag effect, with lower gears providing more noticeable drag and stronger braking performance. 3. When driving on long downhill roads, shifting to a lower gear and utilizing the engine's drag effect can reduce the burden on the brakes and minimize the number of brake applications, preventing brake overheating and subsequent thermal fade. On snowy, icy, or muddy roads, using engine drag braking can help prevent skidding.

7

3

Share

Is it necessary to repair a slightly dented fender?

A slightly dented fender needs to be repaired. If the dent is not very severe, it can be pulled out using a pull rod. However, if the dent is more serious, sheet metal repair will be required. Introduction to Fenders: The fender is the body panel that covers the wheel, named for its resemblance to a bird's wing in older car models. Based on installation position, fenders are divided into front and rear fenders. The front fender is installed near the front wheel and must accommodate the maximum space required for wheel rotation and movement. Therefore, designers use 'wheel movement diagrams' based on the selected tire size to verify if the fender's design dimensions are appropriate. Notes on Rear Fender Repair: Determine the cutting range carefully—it's better to cut more than less, but avoid damaging the inner structure or interior. When fitting the new part, pay attention to the alignment with the rear windshield, rear door, rear bumper, rear hood, and rear taillight for overall aesthetics. Ensure precise fitting and secure temporary fixation in all directions. During welding, monitor for immediate deformation, especially when welding two surface joints. Weld carefully to avoid thermal expansion and contraction that could affect the overall appearance and lead to irreversible mistakes.

5

1

Share

How to Turn On/Off a Manual Anti-Glare Rearview Mirror?

The switch for a manual anti-glare rearview mirror is usually located beneath the mirror, featuring a small lever that can be toggled to activate or deactivate the function. When the vehicle is exposed to intense light from behind, the driver needs to manually operate the mirror to engage the anti-glare feature, which helps mitigate the impact of bright light on the driver's visibility. When not needed, the anti-glare function can be manually turned off to ensure a clear view of the traffic behind. Further details are as follows: 1. The anti-glare functionality of a manual rearview mirror is achieved through its mirror construction, which consists of two surfaces with different reflectivity levels, installed at varying angles. 2. During daytime, the high-reflectivity surface is used to ensure the mirror clearly reflects the rear view. When subjected to strong light from behind, the lever (pushed toward the rear of the vehicle) switches to the low-reflectivity surface, reducing light intensity to prevent glare interference with the driver's vision—this is the secret behind its anti-glare capability.

10

2

Share

How to Open the Rear Door of Buick GL8?

The method to open the rear door of Buick GL8 is as follows: 1. Press the door opening button from the driver's seat or use the car key to press the door opening button. 2. Turn the outer door handle and press the button on the side of the driver's seat to open the door. More information about the Buick GL8 door is as follows: 1. Press the second button on the door closing button on the driver's seat while driving, and the door will close. 2. The outer handle of the car can automatically close the door. 3. Press the button on the side of the main cabin, and the door will automatically close. 4. Press the button in the upper right corner of the car key, and the door will automatically close.

9

3

Share

What are the symptoms of a faulty car distributor?

When a car distributor is damaged, the following symptoms may appear: No spark, the engine does not operate properly and fails to start. At the same time, the engine may experience knocking, shaking, poor acceleration, and abnormal exhaust smoke. High-voltage leakage. Below are the methods to diagnose a faulty car distributor: Turn on the ignition switch and start the engine. If the ammeter fluctuates between 3～5A but the engine shows no signs of ignition, it indicates a fault in the high-voltage coil of the ignition coil or the central high-voltage wire, or a capacitor leakage fault. If the ammeter shows no current or no change in current, it indicates an open circuit in the low-voltage circuit. Turn on the ignition switch and use a test lamp to connect to the movable contact terminal of the circuit breaker (at this time, the distributor cap should be removed to keep the circuit breaker contacts open). If the lamp lights up, it indicates an open circuit fault in the circuit breaker contacts. Rotate the crankshaft to observe whether the cam lobe of the distributor shaft can push the circuit breaker contacts open. If the circuit breaker contacts cannot be pushed open, it indicates improper adjustment of the circuit breaker gap; if they can be pushed open, continue to check the circuit breaker contact gap and the contact condition of the working surface. If the lamp does not light up, check whether the capacitor is short-circuited due to breakdown. If the capacitor is normal, continue to use the test lamp to connect to the primary coil terminal of the ignition coil. If the lamp lights up, check whether there is an open circuit fault in the primary coil; if it does not light up, there is an open circuit fault in the ignition switch or the circuit between it and the positive terminal of the power supply.

4

5

Share

What Does Inventory Car Mean?

Inventory car refers to vehicles that have not been sold in a timely manner and remain in stock. As for the definition and duration of inventory cars, there are no explicit legal provisions or boundaries. Generally, it refers to vehicles that have been in stock for 3 to 6 months after leaving the factory, some for over 6 months or even a year, and in extreme cases, several years. Regarding the inventory duration, the production date of the vehicle can be found on the car's nameplate located on the side of the passenger seat or in the engine compartment. The time elapsed since the production date is considered the inventory duration. Below are some relevant details about inventory cars: 1. Spending the inventory period in the manufacturer's warehouse. 2. Spending the inventory period in the dealer's warehouse. 3. When picking up the car, it is essential to thoroughly inspect the vehicle to avoid receiving an inventory car.

2

1

Share

What are the common causes of frequent electronic power steering issues in the Hongguang S?

What to Do When Brakes Fail During Descent?

Is it necessary to repair a slightly dented fender?

How to Turn On/Off a Manual Anti-Glare Rearview Mirror?

How to Open the Rear Door of Buick GL8?

What are the symptoms of a faulty car distributor?

What Does Inventory Car Mean?

What does Audi's 'Kua Chuo' mean?

How to Reset the Oil Light on Buick Excelle?

Why can't the Buick Excelle start?

How to Find the Owner's Phone Number by License Plate Number?