What Are the Common Car Detailing Services?

1 Answers
DeDante
07/29/25 5:50pm
Common car detailing services include exterior detailing, interior detailing, paint surface detailing, and car protection. Exterior detailing: Mainly involves cleaning the car body surface, removing oily stains, new car wax removal, old car wax removal, trim restoration, and tire refurbishment. Interior detailing: Primarily focuses on interior care, engine maintenance, and trunk cleaning. Paint surface detailing: Mainly deals with scratch treatment and paint dullness issues. It includes operations like touch-up painting and color enhancement for the car surface. Car protection: Includes applying explosion-proof solar films, installing anti-theft devices, voice alarm systems, and static electricity dischargers. Car washing precautions: Avoid washing under direct sunlight to prevent paint cracks from thermal shock; regularly inspect paint surfaces without using car covers for heat insulation; avoid frequent repainting; refrain from using car dusters after rain to prevent surface scratches; and preferably maintain paint at professional car washes.
Was this review help?
17
3
Share
More Forum Discussions

How to Solve the Resonance Noise of Car Sunroof?

Solutions for car sunroof resonance noise: 1. Use sealant to bond the rain deflector; 2. Replace the rubber seal; 3. Disassemble the sunroof components and add soft padding. The car sunroof is installed on the roof and can be categorized into: sliding-out type, built-in type, built-in flip-up type, panoramic type, and curtain type. Functions of a car sunroof: 1. Increase lighting: Opening the sunroof on cloudy days or when photographing the car interior can enhance the light intensity inside the car; 2. Reduce wind noise: Opening the sunroof while driving can reduce wind noise and improve driving comfort; 3. Rapid cooling: Opening the sunroof and turning on the air conditioning can quickly lower the temperature inside the car.
16
1
Share

What is the difference between CAS surface and A surface?

Here is an introduction to the differences between CAS surface and A surface: The sequence is different: In automotive styling, the A surface comes first, followed by the CAS surface. Before the release of the automotive styling A surface, the digital model used for preliminary display of the interior and exterior styling is called the CAS surface. The content they represent is different: The A surface must meet the requirements of a gap between adjacent surfaces of less than 0.005mm, a tangent change of less than 0.16 degrees, and a curvature change of less than 0.005 degrees. On the other hand, the CAS surface is mainly used in the styling feasibility study phase for checking regulatory requirements, styling, engineering, production, after-sales maintenance, insurance services, and the production of small-scale clay models.
16
2
Share

Is the original car invoice required for second-hand car transfer?

Second-hand car transfer requires the original car invoice. The following is relevant information about the original car invoice for second-hand car transfer: 1. Introduction to the original car invoice: The original car invoice refers to the invoice issued when purchasing a new car. When we buy a second-hand car that is a personal first-hand car, the invoice required for the transfer is the original car invoice. 2. Check whether the name of the vehicle owner is consistent: When checking the original invoice, pay attention to whether the name of the vehicle owner on the original invoice matches that on the driving license. If they are inconsistent, the car may be of unknown origin or the invoice may be problematic. 3. Check whether it has the necessary official seal: Check whether the invoice is stamped with the verification seal of the Industrial and Commercial Administration Bureau. If the invoice is found not to be stamped, a certificate (with the official seal) needs to be issued by the original new car sales unit before the transfer, and then the verification seal needs to be affixed by the Industrial and Commercial Administration Bureau.
2
1
Share

What is the top speed of the KTM RC390?

The top speed of the KTM RC390 is 170 km/h. Below is a relevant introduction to the KTM RC390 motorcycle: Configuration: The RC390 is generously equipped, featuring a 373cc engine with forged aluminum pistons, cylinder wall coating, and a dual overhead camshaft valve train. The 89mm x 60mm bore and stroke engine allows it to easily reach over 10,000 rpm. Performance: The RC390 engine delivers 32 kW of power, equivalent to 43 horsepower. After passing through the RC's six-speed transmission and drivetrain, the energy loss is approximately 10%. The actual rear wheel horsepower is around 40 hp. The RC390 has a fuel tank capacity of 9.84 liters and a dry weight of 147 kg. The power-to-weight ratio is about 0.196 kW per kilogram, just within the A2 certification limit.
12
2
Share

How to Use the Engine Start-Stop Function in the Highlander?

The method to use the engine start-stop function in the Highlander: Press the start-stop cancel button located on the left side of the steering wheel to deactivate the start-stop function, and the dashboard will display the corresponding status; Press the start-stop button again to reactivate the system. The Highlander is a mid-size vehicle under GAC Toyota, with exterior dimensions of 4890mm in length, 1925mm in width, and 1715mm or 1720mm in height. The Highlander is equipped with a 2.0T turbocharged engine, featuring an L-type cylinder arrangement, paired with a 6-speed automatic transmission. Its suspension system consists of a MacPherson strut independent front suspension and an E-type multi-link independent rear suspension.
12
2
Share

Is the jx4d25a6l an Isuzu engine?

jx4d25a6l is not an Isuzu engine, this engine belongs to JMC Engine. Below is the relevant introduction about JMC Engine: Classification: Currently, the engines equipped in domestic light commercial vehicles can be divided into two major categories: gasoline engine series and diesel engine series. Advantages: The engines independently developed by JMC are quite excellent. For example, the self-branded 4JB1 series engines. They inherit the advanced technological processes of Isuzu engines. As one of the best light-duty diesel engines in China, with outstanding product quality, excellent technical performance, and strong product versatility, JMC engines not only fill the gap in the development and production of light-duty diesel engines in China but also become one of the core competitiveness that enables JMC Motors to stand among the giants of China's commercial vehicles.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.