What are the color classifications of parking spaces in Subject One?

Where is the Evaporative Emission System Leakage Fault Located?

Evaporative emission system leakage may be caused by damage to the evaporative emission system solenoid valve, damage to the evaporative emission system piping, or blockage of the filter at the air inlet at the bottom of the activated charcoal canister by dust and impurities. Below are the relevant details: 1. What is the evaporative emission system: The evaporative emission system, also known as the gasoline vapor emission control system, is one of the auxiliary control systems of the automobile engine and one of the automobile engine emission control systems. The evaporative emission system collects gasoline vapor from the fuel tank and directs it into the cylinders for combustion, thereby preventing gasoline vapor from being directly discharged into the atmosphere and causing pollution. At the same time, it controls the amount of gasoline vapor introduced into the cylinders for combustion according to the engine operating conditions. 2. Causes of damage and solutions: The damage may be due to reasons such as damage to the evaporative emission system solenoid valve or damage to the evaporative emission system piping. Since the actual vehicle cannot be seen, an accurate fault diagnosis cannot be made. It is recommended to contact the local 4S store for inspection and repair.

9

4

Share

What is the normal fuel consumption for a car?

Generally speaking, what constitutes normal fuel consumption depends on the vehicle model, fuel-saving technology, and specific working conditions, as the fuel consumption varies for each car. Larger engine displacement typically results in higher fuel consumption. For a car's fuel consumption per 100 kilometers, under normal circumstances, compact cars consume 6-10 liters; mid-size cars consume 8-12 liters; and large cars consume 12-18 liters. Here is some additional information: 1. Driving habits: Maintain good driving habits: Different driving habits can affect a car's fuel consumption. During driving, frequent rapid acceleration or deceleration can increase fuel consumption by 5%-10% compared to normal conditions; 2. Maintain speed: Keep a steady speed: Most cars achieve optimal fuel efficiency at speeds between 60-80 km/h. If the speed can be maintained steadily during driving, the car's fuel consumption will reach its best state.

15

3

Share

Can a B2 license holder drive a 12-meter 4-axle 8-wheel truck?

12-meter 4-axle 8-wheel trucks can be driven with a B2 license. Below is relevant information about motor vehicle driving licenses: 1. Definition of motor vehicle driving license: A motor vehicle driving license is a legal certificate issued by authorities after the applicant completes required training, passes examinations on traffic regulations and driving skills, and obtains permission to operate specific types of motor vehicles. 2. Vehicle categories permitted: The vehicle categories that a license holder can operate are sequentially classified as: large passenger vehicles, tractor trucks, city buses, medium passenger vehicles, heavy trucks, small cars, small automatic transmission vehicles, low-speed trucks, three-wheeled vehicles, small automatic transmission vehicles for disabled persons, regular three-wheeled motorcycles, regular two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams.

19

3

Share

How many kilometers should the Qiao Ge change the engine oil?

Mostly it should be changed every 500 kilometers. Engine oil, also known as engine lubricant, is hailed as the 'blood' of a car, playing roles in lubrication, cleaning, cooling, sealing, and reducing wear for the engine. It is roughly divided into three categories: mineral oil, semi-synthetic oil, and full synthetic oil. Generally, full synthetic oil has a longer replacement interval, a wider temperature range, and is less volatile compared to semi-synthetic or mineral oil. Here are some extended details about the Qiao Ge: 1. Maintenance: Change the engine oil every 500 kilometers, replace the engine oil and clean the carburetor at 1500 kilometers, check and clean the air filter, replace the gear oil, adjust the valves at 3000 kilometers, change the engine oil and gear oil, clean the carburetor, replace the air filter. After the break-in period, clean the carburetor every 2000 kilometers, replace the filter and engine oil, and the gear oil can be changed every 3000 kilometers. 2. Advantages: High aesthetic appeal, with a brand-new design leaning towards European styles, featuring rounded shapes, overall simplicity and compactness, balancing fashion and simplicity; powerful, as the Qiao Ge series has always been lightweight, with the Qiao Ge i weighing 90 kilograms paired with a 6.1-kilowatt engine, making it even more powerful; low fuel consumption, solid workmanship, with the overall assembly of the car being stable, without any loose or flimsy feeling, and all parts are very sturdy.

7

1

Share

What to Do After a Rear-End Collision: Should You File an Insurance Claim?

After a rear-end collision, the driver should immediately stop the vehicle, secure the scene, and promptly report to the police and notify the insurance company. Below is relevant information about rear-end collisions: 1. Introduction to Rear-End Collisions: A rear-end collision occurs when the front of a following vehicle impacts the rear of the leading vehicle in the same lane. This is primarily caused by insufficient following distance below the minimum safe interval, delayed driver reaction, or poor braking system performance. 2. Anti-Rear-End Techniques: When approaching sections with blind spots such as large undulating roads, reduce speed in advance. Maintain consistent speed both uphill and downhill, and be prepared for emergency stops or lane changes. Avoid following too closely; maintain a sufficient safe distance and always be ready to brake if the leading vehicle brakes suddenly. Try to avoid emergency braking. If a situation arises, reduce speed early and use intermittent braking to alert the following vehicle. Novice drivers should avoid using the fast lane whenever possible.

9

0

Share

How to Collect Evidence for Accidents Caused by High Beams?

Evidence for accidents caused by high beams can be obtained from surveillance or dashcam footage. Here are the methods: 1. The driver affected by high beams should provide dashcam video as proof of being dazzled. 2. Based on the dashcam footage, all oncoming vehicles within 10 minutes before the accident can be listed as defendants, with all defendants in this time frame bearing the burden of proof (referencing the principle of reversed burden of proof in cases of objects thrown from heights). 3. If oncoming vehicles in this time frame cannot prove they did not use high beams, they bear joint liability for the accident.

14

3

Share

What are the color classifications of parking spaces in Subject One?

Where is the Evaporative Emission System Leakage Fault Located?

What is the normal fuel consumption for a car?

Can a B2 license holder drive a 12-meter 4-axle 8-wheel truck?

How many kilometers should the Qiao Ge change the engine oil?

What to Do After a Rear-End Collision: Should You File an Insurance Claim?

How to Collect Evidence for Accidents Caused by High Beams?

Why do water droplets not fall off the car after rain?

What is the definition of a multi-purpose truck?

What to Do If You Cross the Opposite Lane While Making a Left Turn?

Why do I need to pay 500 yuan for the Subject 3 driving test?