What are the clothing taboos for the Subject 3 driving test?

2 Answers
SanDelaney
07/25/25 2:56am
There are no clothing restrictions for the Subject 3 driving test, but wearing slippers or high heels is not allowed. Below are some important notes regarding the Subject 3 test: 1. Pre-test preparation: Walk around the vehicle once before getting in, especially pausing near the monitoring area. After entering the car, first fasten your seatbelt, then adjust the seat and rearview mirrors. 2. Light simulation: Before the light simulation test begins, check if the light switches are reset to their original positions. Ensure all lights are completely off before starting the test as instructed. If two consecutive voice commands require the same light operation, no action is needed upon hearing the second command. 3. Starting off: Always observe the surrounding traffic environment before starting. After moving, merge into the left lane as soon as possible, straighten the vehicle, accelerate, and shift to second gear. Failing to merge for an extended period will result in immediate failure.
Was this review help?
7
2
Share
ZacharyRose
08/10/25 4:46pm
There are several major clothing taboos to avoid during the driving test (Subject 3), so don’t be foolish like I almost was. Footwear is crucial—wearing high heels or flip-flops is too dangerous, as they may cause unstable clutch or brake pedal control, and the examiner will deduct points immediately. Avoid overly loose clothing, such as baggy jackets or long pants, which can easily get caught on the door or gearstick while steering, increasing accident risks. Also, refrain from wearing hats, scarves, or sunglasses that obscure your face, as the test rules require clear and unobstructed visibility. Opt for comfortable, well-fitted attire like sneakers with stretchy jeans to help you stay relaxed and move more flexibly. Remember, the test is a practical assessment—prioritize comfort and safety in your outfit, or you’ll have no one to blame if you fail. Test your clothing choices during practice sessions beforehand.
Was this review help?
13
4
Share
Expand All
More Forum Discussions

What are the reasons for the engine yellow light in the Buick Excelle?

The reasons for the engine yellow light in the Buick Excelle are: 1. The battery is dead; 2. Maintenance was not performed as required; 3. Insufficient engine oil. Taking the 2019 Buick Excelle as an example, it belongs to the compact car category, with body dimensions of: length 4609mm, width 1798mm, height 1486mm, wheelbase of 2640mm, fuel tank capacity of 44l, and trunk capacity of 400l. The 2019 Buick Excelle is equipped with a 1.0t turbocharged engine, with a maximum horsepower of 125ps, maximum power of 92kw, maximum torque of 170nm, and is paired with a 6-speed manual transmission.
16
5
Share

What are the symptoms of a damaged outdoor temperature sensor?

Outdoor temperature sensor damage may manifest in the following ways: the vehicle's air conditioning fails to cool or exhibits abnormal cooling. The functions of the outdoor temperature sensor are: 1. Detecting the ambient temperature outside the vehicle, allowing the control system to determine the control method based on the difference between the outdoor and indoor temperatures; 2. Providing the ECU with the outdoor temperature signal, enabling the ECU to compare it with the indoor temperature signal to regulate the cabin temperature according to occupants' needs. The functions of the air conditioning system are: 1. Filtering the air entering the cabin; 2. Absorbing moisture from the air; 3. Maintaining clean air to prevent bacterial growth; 4. Preventing window fogging; 5. Adjusting cabin temperature.
12
2
Share

What are the maintenance items for a 100,000-kilometer car?

Maintenance items for a 100,000-kilometer car include: 1. Replace engine oil, oil filter, and clean the air filter; check whether the generator belt and wiper blades are damaged. 2. Check whether the levels of various fluids are normal. 3. Check whether the tire pressure is normal and whether the tires have uneven wear, bulges, or damage. 4. Inspect the car chassis, including the brake pads, brake discs, connecting rods, ball joints, and CV joints for scratches. 5. Check whether all switches and lights are working properly. The benefits of maintenance include: 1. Ensuring the vehicle is in excellent performance condition. 2. Improving vehicle efficiency and reducing the wear of parts and tires. 3. Enhancing driving safety. 4. Preventing potential hazards caused by vehicle issues. 5. Reducing noise and environmental pollution. 6. Keeping the vehicle's appearance clean and preventing damage.
5
4
Share

Can a patched car tire still be used on highways?

Can a patched car tire still be used on highways? Even if the tire has been damaged and requires repair, it generally does not significantly affect the vehicle's driving performance. The functions of a tire are: 1. To transmit driving force, braking force, and steering force to enable vehicle operation; 2. To support the vehicle's load; 3. To reduce and absorb vibrations and impacts during driving, preventing severe vibrations from damaging vehicle components. Methods for tire maintenance include: 1. Regularly clean stones stuck in the tire treads; 2. Minimize exposure to direct sunlight; 3. Monitor tire pressure promptly; 4. Pay attention to suspension maintenance; 5. Regularly check front wheel alignment; 6. Adopt careful driving habits, choosing smooth road surfaces and avoiding objects that could puncture or scratch the tires, as well as chemical spills that could corrode the tires.
5
1
Share

How to Lift Up the Windshield Wiper?

The method to lift up the windshield wiper is: 1. Turn off the car; 2. Press the windshield washer switch, and the wiper will move to the middle position of the windshield; 3. Lift up the wiper. The functions of the wiper include: 1. Helping the vehicle maintain a safe distance from the centerline of the left lane; 2. Assisting the driver in determining the position of the left wheels; 3. Helping to judge the position of the right wheels; 4. Aiding in estimating the distance between the right side of the vehicle and the roadside; 5. Assisting in parallel parking; 6. Removing raindrops and dust attached to the windshield. The replacement method for the wiper is: 1. Lift up the wiper; 2. Press the clip below and remove the wiper blade; 3. Take off the wiper; 4. Pry up the front end of the middle clip; 5. Insert the wiper into the middle clip, pull it tight by hand, and the replacement is complete when a clicking sound is heard.
17
1
Share

What is the actual fuel consumption of the Mondeo 1.5?

There are currently 2 models of the Mondeo 1.5T available for sale: the Luxury and Fashion models, both with a combined fuel consumption of 7.3L/100km. The above figure is the NEDC combined fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 9.63-12.03L/100km. Methods to reduce fuel consumption: Clean engine carbon deposits: Excessive engine carbon deposits are a significant cause, primarily due to the use of unsuitable fuel. It is recommended to add a certain amount of cleaner when refueling. If the effect is not noticeable, it indicates a large amount of carbon deposits in the engine. In this case, the car must be taken to a 4S shop for professional cleaning of the carbon deposits by technicians. Check the oxygen sensor: As an internal control unit of the car, the oxygen sensor mainly monitors the fuel-air ratio of the engine. Once damaged, it will cause an imbalance in the fuel-air ratio, leading to a sudden increase in fuel consumption. When the oxygen sensor is damaged, the exhaust pipe will emit darker-colored exhaust during driving, and the sensor should be replaced immediately. Regularly replace the three filters: During vehicle use, the oil filter, air filter, and fuel filter must be replaced regularly. If not replaced for a long time, they become dirty and send incorrect information to the engine control unit, resulting in incomplete fuel combustion and increased engine carbon deposits. Check the electronic control unit: Although the engine's electronic control unit is highly reliable, in older vehicles, various faults may inevitably occur.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.