···
Log in / Register

What Are the Clever Tips for Cleaning Oil Stains on Car Windows?

4 Answers
DelCollin
09/01/25 2:57am
Toothpaste is a clever trick for removing oil film. Toothpaste contains abrasive particles that can provide a polishing effect. When using toothpaste to clean oil film, it's important to apply the right amount of pressure and wipe evenly, which helps to better clean the pores on the glass surface and remove the oil film. Here are some related methods for removing oil film from cars: 1. Using dry newspaper: After washing the car, take a dry newspaper, dampen it slightly, and wipe the glass. Once the water on the newspaper is wiped dry, the oil film on the glass will also be removed. 2. Using a specialized oil film cleaner: Spray the cleaner evenly on the glass, then wipe it with a car wash towel or sponge for excellent cleaning results.
Was this review help?
8
0
Share
EllaMarie
09/13/25 5:52am
As a middle-aged person who frequently drives kids to school and values cleanliness, I find car glass grease stains quite annoying, especially after rain when they leave a greasy film that obstructs vision. My go-to household trick is mixing white vinegar and water in a 1:1 ratio, pouring it into a spray bottle, and misting it onto the glass. After letting it sit for a few minutes to soften the grease, I gently wipe it off with a microfiber cloth for a streak-free finish. For stubborn stains, I add some lemon juice to boost the cleaning power—it's both natural and budget-friendly. Regular cleaning like this prevents buildup, and remember to avoid using paper towels to prevent lint residue. Safe driving comes first!
Was this review help?
15
2
Share
Expand All
Patrick
10/27/25 6:38am
As a young car enthusiast, I always enjoy DIY car maintenance methods. For dealing with oily stains on glass, I usually mix baking soda with hot water to form a paste, apply it, wait for 5 minutes, and then scrub with a soft sponge—the results are great. When encountering stubborn oil stains, I use specialized glass cleaner with a microfiber cloth, gently wiping without leaving streaks. Normally, I avoid parking under trees or near pollution sources to minimize issues. After cleaning, I always check if the glass is crystal clear to ensure good driving visibility.
Was this review help?
20
2
Share
Expand All
Aurora
12/10/25 6:54am
As a seasoned driver with decades of experience, I've encountered numerous windshield grease issues, where patience and simple methods are key. I prefer to first rinse with water to soften the stains, then spray with diluted alcohol or dish soap, wait a moment, and wipe clean with an old T-shirt cloth using up-and-down motions. Avoid using sharp tools to prevent scratching the glass. After cleaning, it's best to apply a thin layer of car wax to prevent future grease buildup, which can save a lot of hassle.
Was this review help?
19
1
Share
Expand All
More Forum Discussions

Is the BMW X3 domestically produced or imported?

BMW X3 has both domestically produced and imported versions. Here are the specific introductions of the two versions: 1. The imported BMW X3 has a 3.0 displacement, high-end performance, and can accelerate from 0 to 100 km/h in just 5.6 seconds, but the cost-performance ratio is not high. 2. In terms of transmission, both the imported and domestically produced BMW X3 use ZF's 8-speed automatic transmission, with front four-wheel drive and full-time four-wheel drive, both using multi-plate clutch type central differential locks. The difference in chassis is not significant. 3. The domestically produced BMW X3 has a wheelbase extended to 2864 mm, providing more spacious interior space.
3
5
Share

Will the Fuel Nozzle Automatically Stop When the Tank is Full?

When filling a car's fuel tank to full capacity, the fuel nozzle will automatically stop. Below is an introduction to the working principle of fuel nozzles: 1. The fuel nozzle automatically stops when the car's fuel tank is full. During non-quantitative refueling, when the fuel level in the tank covers the nozzle's opening, the nozzle will automatically stop to prevent overflow. Each fuel nozzle is equipped with an automatic shut-off device (commonly known as a sensor), about the size of a little fingernail, located inside the nozzle. 2. The self-sealing fuel nozzle features an independent, sealed pressure-sensing system integrated with the nozzle body. When the main valve of the nozzle is opened, allowing high-speed fuel flow through the return valve, the unique structural design of the return valve assembly creates negative pressure within the pressure-sensing system. Under normal operating conditions, this negative pressure is continuously balanced by air replenishment through a vent tube located inside the fuel outlet pipe, maintaining an equilibrium state of pressure above and below the sensing diaphragm.
13
0
Share

Can the ETC device be installed on the black dot area?

ETC devices can be installed on the black dot area of the windshield, as long as they do not obstruct the driver's view and can detect the toll station's scanning equipment. However, installing them outside the black dot area has drawbacks, such as reduced solar charging capability, which may lead to power depletion over time. Correct ETC installation positions: For small vehicles like cars and minivans, the ETC card and OBU device should be installed on the upper middle part of the front windshield. For large vehicles like trucks and buses, the installation position is on the middle lower part. ETC installation requirements: height should be no less than 1.2 meters and no more than 2.5 meters; the installation angle N should be between 30º and 90º (the angle between the electronic tag surface and the horizontal plane). ETC installation procedure: Upon receiving the device, first check if the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU; a red light will briefly illuminate, and the OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning properly. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then peel off the OBU's adhesive backing and attach it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front facing the driver and the back facing the windshield, ensuring the chip is properly inserted into the OBU device.
11
5
Share

How Many Kilometers Should a Car's Gear Oil Be Changed?

Manual transmissions typically require gear oil changes every 100,000 kilometers, while automatic transmissions usually need changes every 60,000 to 80,000 kilometers. Below are some key points about transmission systems: 1. Gear oil in manual transmissions serves lubrication and cooling functions; in automatic transmissions, it performs lubrication, cooling, and power transmission roles. 2. The control mechanisms of automatic transmissions require transmission fluid to operate properly, with some automatic transmission fluids also serving power transmission purposes. 3. Torque converter transmissions connect to the engine through the torque converter - these transmissions contain transmission fluid within their torque converters, which plays a crucial role in power transmission.
20
2
Share

How to Activate the Tire Pressure Monitoring System on the Mercedes-Benz B200?

Method to activate the tire pressure monitoring system on the Mercedes-Benz B200: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "ding" sound before releasing. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, indicating the tire pressure reset is complete. There are generally three reasons for abnormal tire pressure: Abnormal tire pressure: The system usually alerts when the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are necessary. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure reset is not performed promptly, the system will still record the previous data, causing the tire pressure monitoring indicator to light up. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors the tire pressure, is installed directly inside the tire and connected to the tire inflation valve. If the sensor is damaged during driving, such as by hitting a curb, it will also cause the tire pressure warning light to illuminate. For sensor damage issues, the only solution is to replace it with a new component.
1
5
Share

How to Open the Hood of a Corolla Car?

First, locate the switch below the left side of the driver's seat and pull it to open a small gap in the hood. Then, reach into the gap and flip the lever of the safety latch to successfully open the engine hood. Below is some relevant information about the Corolla: 1. The Corolla is a compact sedan under Toyota. The new Corolla is equipped with two types of engines: a 1.8-liter naturally aspirated engine and a 1.2-liter turbocharged engine. The model with the 1.8-liter naturally aspirated engine is a hybrid version, which offers sufficient power and excellent fuel economy. 2. The 1.8-liter naturally aspirated engine in the hybrid version is an Atkinson cycle engine. Although this engine does not provide strong power, it has outstanding fuel efficiency. The 1.8-liter naturally aspirated engine in the hybrid version delivers a maximum power of 98 horsepower and a maximum torque of 142 Nm. The engine reaches its maximum power at 5,200 rpm and its maximum torque at 3,600 rpm. This engine is equipped with VVT-i technology and multi-point fuel injection, and it features an aluminum alloy cylinder head and block. The electric motor paired with this engine has a maximum power of 53 kW and a maximum torque of 163 Nm.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.