What are the charging requirements for the Chery Ant?

1 Answers
SanCourtney
07/29/25 6:36pm
The charging requirements for the Chery Ant are as follows: 1. Compliant with national standards for both vehicle and charging pile: Use charging piles that comply with national standards and avoid using third-party or uncertified charging piles without national production and inspection approval marks. Proper wiring methods (especially grounding protection) are also crucial for safety. 2. Confirm vehicle status: Before charging, ensure the vehicle is in good condition and the charging equipment is functioning properly. After charging begins, confirm that the voltage and current are within normal ranges before leaving the site. If possible, periodically check the charging status to ensure it remains normal. 3. Avoid using extension cords: Try to avoid using extension cords. If an extension cord must be used, do not place the extension cord and charging interface directly on the ground to prevent water ingress during heavy rain, and avoid exposing the extension cord to direct sunlight. 4. Avoid exposure to sunlight and high-power charging: Also avoid exposing the charging cable to direct sunlight and charging at high power, as prolonged exposure and heat can cause the charging cable to overheat and potentially ignite the socket.
Was this review help?
1
2
Share
More Forum Discussions

How to Solve the High Fuel Consumption of Peugeot 301?

Excessive carbon deposits in the engine is a major cause, primarily due to the use of unsuitable fuel. It is recommended to add a certain amount of cleaning agent when refueling. The oxygen sensor mainly monitors the fuel-air ratio of the engine. Once damaged, it will cause an imbalance in the engine's fuel-air ratio. During vehicle use, the oil filter, air filter, and fuel filter must be replaced regularly.
7
3
Share

What Causes Car Air Conditioning to Leak Water?

Whether it is normal for a car's air conditioning to leak water depends on the situation. If water leaks from the exhaust pipe or other external parts of the car when the air conditioning is on, it is a normal occurrence. This is condensation from the air conditioning and will not harm the car or the air conditioning system. However, if water leaks inside the car, such as under the passenger seat, it is abnormal and should be repaired at an auto repair shop. The car air conditioning system is designed to cool, heat, ventilate, and purify the air inside the vehicle. Its purpose is to provide a comfortable environment for passengers, reduce driver fatigue, and enhance driving safety. Reasons for water leakage when the car air conditioning is on: The refrigerant flows into the evaporator inside the car, where it absorbs heat from the air through contact with the evaporator. It is then compressed and expanded again in a continuous cycle, gradually removing heat from the air inside the car. Since the air contains a lot of water vapor, when it encounters the very cold evaporator, it turns into water and drains out from under the car chassis. Solutions for car air conditioning water leakage: Open the windows for ventilation after turning off the air conditioning. If the leakage is abnormal, promptly visit a specialized repair shop or 4S store for repairs to avoid affecting normal driving.
15
3
Share

Does a new car need maintenance after running 1000 km in 3 months?

1000 km maintenance is acceptable, but it's still recommended to wait until 5000 km. If maintenance has already been performed, post-break-in period maintenance is still required. The debris generated during the break-in period needs to be promptly removed, otherwise it may affect the engine. Objectives of car maintenance: The purpose of car maintenance is to keep the vehicle clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life. Modern car maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. Precautions for car maintenance: The car maintenance cycle refers to the interval mileage or time between maintenance services. High maintenance frequency is not a bad thing, as it can more effectively ensure various vehicle performances. In the initial stage of vehicle use, regular maintenance is mainly required, with relatively low costs. When the vehicle reaches a certain age or mileage, it enters the repair period, and the costs become relatively higher. However, when determining the car maintenance cycle, it's advisable to refer to the maintenance cycle recommended by the manufacturer, combined with the vehicle's technical condition and actual usage, and make appropriate adjustments to the maintenance cycle.
10
4
Share

Does Glass Oil Film Remover Damage Glass?

Glass oil film remover does not damage the glass and can be used with confidence. Here is the relevant information: 1. Introduction to glass oil film: Glass oil film is divided into external oil film and internal oil film. External oil film: This refers to the stubborn layer formed by the accumulation of various environmental impurities on the outer side of the glass over time. The microscopic surface of this impurity layer is uneven, with water trapped in the gaps, so a continuous fog-like film can be seen when the wiper blade passes over it. This unevenness also affects light transmission, significantly impairing visibility and safety during rain, snow, fog, or nighttime driving. Internal oil film: Various oily suspended particles in the air can adhere to the inner side of the glass, such as exhaust fumes, air conditioning, low-quality interior care products, smoking, and many other factors, which can accumulate over time to form an internal oil film. This is particularly noticeable when observing the inner side of the windshield under nighttime lighting, severely affecting visibility and safety during rainy night driving. 2. Function of glass oil film remover: It provides a quicker and more efficient way to handle conventional dirt on the glass surface, effectively delaying the formation of external oil film and thoroughly cleaning internal oil film. It is suitable for daily glass cleaning, typically used after each car wash, and can be applied both inside and outside the vehicle. It is generally safe to use on special surfaces such as tinted glass, coated glass, and organic glass.
2
5
Share

How to Release the Parking Brake on a Highlander?

After the engine is started, with the driver's side door closed, the parking brake will automatically release when the vehicle moves. The parking brake is commonly referred to as the handbrake. When the engine is running, press the brake pedal, first pull the handle backward while pressing the lock button at the end of the handle, then push the handle all the way down.
8
4
Share

What should you do if the engine catches fire while the vehicle is in motion?

You should promptly steer the vehicle away from the traffic lane to a safe location, parking it in an open area far from flammable and explosive materials, crowds, other vehicles, buildings, and trees. If the engine catches fire, quickly turn off the engine. Avoid opening the engine hood if possible, and attempt to extinguish the fire from the radiator and the underside of the vehicle.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.