What are the characteristics of Yokohama tires?

1 Answers
LeJade
07/30/25 5:37am
Yokohama tires are mainly known for their wear resistance and fuel efficiency. The downside is average grip, with a tendency to slip on wet surfaces. Here is relevant information about Yokohama tires: Introduction: Yokohama tires were originally called Yokohama tires. They use highly wear-resistant natural rubber and extract orange oil from orange peels to soften the rubber, thereby increasing tire-to-road contact to some extent. Their "Silent Core" technology significantly reduces noise. Technical Design: To demonstrate superior handling performance, the contact area between the tread and road surface is maximized through optimized contact shape. For improved wet performance, drainage grooves are positioned along the rotation centerline, delivering excellent water evacuation. Through precise calculations, the overall tread pattern achieves more uniform ground contact during driving, ensuring stability even at high speeds.
Was this review help?
15
1
Share
More Forum Discussions

Can Poor Fuel Quality Cause Engine Vibration?

Poor fuel quality can lead to unstable cylinder pressure in the engine, especially causing vehicle vibration during idle. Below is an introduction about fuel: 1. Fuel: Fuel is used for internal combustion engines, mainly divided into gasoline and diesel. 2. Classification: (1) Gasoline: Gasoline is classified based on its octane rating. (2) Diesel: Diesel is classified according to its freezing point. (3) Unleaded gasoline: Only super unleaded gasoline can be used in F1 racing. Although largely similar to the 98-octane unleaded gasoline available at regular gas stations, F1 fuel contains additives to ensure faster and more efficient combustion.
5
0
Share

Where is the ramp parking position located?

Ramp parking position is located where the vehicle's bumper aligns with the parking pole line. Operation tips: Control the speed properly, select reference points accurately, and coordinate movements smoothly. Precautions: Before ascending the slope, straighten the direction in the shortest time possible. When going uphill, turn on the right turn signal and approach the right side of the area, ensuring the right side of the vehicle is parallel to a solid line on the right side of the road, with the side of the vehicle no more than 30 cm away from the solid line and not crossing it. Pay attention to the coordinated operation of the clutch, accelerator pedal, and parking brake lever, and the timing of releasing the parking brake lever. Evaluation criteria: After the vehicle stops, if the front bumper of the car or the front axle of the motorcycle is not fixed on the pole line, and the deviation is within 50 cm, 10 points will be deducted; if the vehicle body is more than 30 cm away from the roadside line after stopping, 10 points will be deducted; if the distance exceeds 50 cm, the test will be failed; if the vehicle rolls back 30 cm but not more than 50 cm after starting, 20 points will be deducted; if the vehicle rolls back 50 cm after starting, the test will be failed; stalling on the slope will result in a 10-point deduction; after stalling, restart the vehicle in neutral gear, not in gear; if the vehicle is not started within 30 seconds after stopping, it will be considered as a timeout failure.
13
5
Share

What is the RSX car?

RSX is a sports car that has been nominated for "Top 10 Cars" and "Top 10 Engines". Here is the relevant introduction about the RSX sports car: 1. Exterior design: To consolidate its solid position among similar cars, the new sports car launched in 2005 will improve its dynamic appearance and make its interior more modern. All these will make its performance more outstanding. 2. Vehicle parameters: The car has a length, width, and height of 4380mm × 1724mm × 1394mm respectively; it is equipped with an i-VTECTM inline 4-cylinder engine, matched with a front-speed Automatic manual/automatic transmission.
15
0
Share

Has the Rusting Issue of Domestic Cars Been Resolved?

The rusting issue in domestic cars remains largely unresolved. Causes of rusting in domestic cars: Poor-quality materials, such as single-sided galvanized steel sheets or even non-galvanized ordinary cold-rolled steel sheets, are often used. Automakers lack sufficient experience in rust prevention, and the overall technical level of factories is generally mediocre, with relatively outdated processes. Additionally, critical areas prone to rust, such as the chassis and steering gear, often do not undergo the necessary rust-proofing procedures, resulting in subpar rust prevention. Common rust-prone areas in cars: These primarily include brake discs, paint surfaces, chassis, and the dashboard frame. Brake discs operate in harsh conditions, enduring prolonged high temperatures and exposure to air and moisture—key factors accelerating iron oxidation. Most vehicles use cast iron brake discs, making rust a common occurrence. The main culprit behind paint surface rust is moisture trapped in microscopic paint pores. Collisions, scratches, or even small stones hitting the paint can create tiny spots that develop into rust stains. The chassis, being closest to the ground, is severely affected by road conditions. It suffers from sand and gravel impacts, scraping on uneven roads, and corrosion from rain and snow, significantly shortening its lifespan. Chassis rust can further threaten the normal functioning of other components: compromised steering, oil leaks, chassis deformation, and loose structural framework all pose safety hazards. The dashboard frame, due to its numerous weld points and lack of surface treatment by some manufacturers, is also highly prone to rust. Its concealed location makes it difficult to detect in many cases.
2
2
Share

How many points will be deducted for driving at 80 in a 40 speed limit zone?

Exceeding the speed limit by 100% will result in a 12-point deduction. The following outlines the dangers of speeding in vehicles: 1. Impact on vehicle operating conditions: Long-term speeding can worsen the vehicle's operating conditions and increase the likelihood of failures in systems such as tires, brakes, and steering. Without regular maintenance, it can easily lead to traffic accidents. 2. Increased risk of losing control and overturning during turns: Generally, speeding vehicles are often in the process of changing lanes or overtaking. Each overtaking maneuver creates a point of conflict with surrounding vehicles, increasing safety hazards. Additionally, there is a higher risk of losing control and overturning during turns.
6
1
Share

Why does the car idle shake and have weak acceleration on rainy days?

The reasons for the car idling shake and weak acceleration on rainy days are as follows: 1. Severe engine carbon deposits: The gasoline sprayed by the cold start injector will be largely absorbed by the carbon deposits, resulting in an excessively lean mixture during cold starts, making it difficult to start. In this situation, the car will only start easily after the carbon deposits have absorbed enough gasoline to become saturated. After starting, the gasoline adsorbed on the carbon deposits will be sucked into the cylinder by the engine's vacuum suction force and burned, making the mixture too rich. The engine's combustible mixture alternates between being too lean and too rich, causing the idle to shake after a cold start. 2. Ignition system failure: Check the working condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance of the ignition system and weak spark plug firing can also lead to such fault symptoms.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.