What are the characteristics of German cars?

Why Does Stepping Harder on the Accelerator Cause a Burning Rubber Smell?

Stepping harder on the accelerator causing a burning rubber smell can be attributed to the following reasons: Excessive Throttle Input: This situation is most likely caused by applying too much throttle during semi-engagement. For manual transmission vehicles, excessive throttle during semi-engagement can cause the clutch plates in the transmission to heat up rapidly, resulting in a burning smell inside the car. Additionally, if the handbrake is not fully released while climbing a slope, the brake pads will continuously rub against the brake discs, and the high temperature generated will naturally produce a burning smell. Therefore, when going uphill, it is advisable to avoid pressing the accelerator too hard during semi-engagement to prevent damage to the clutch plates. New Rubber Components: If the vehicle is new, a slight burning rubber smell under the hood is normal because the rubber components are new and will emit a stronger rubber odor when exposed to heat. This issue will naturally disappear after some use.

6

5

Share

What is the issue with the Haval H6 transmission failure?

Haval H6 transmission failure may be caused by improper operation or lack of timely maintenance. If the transmission malfunctions, it is necessary to promptly visit a 4S shop for repairs. The Haval H6 is paired with a 7-speed dual-clutch transmission (DCT), which offers fast gear shifting and high transmission efficiency, making it highly suitable for use with small-displacement turbocharged engines. The Haval H6 is equipped with two engines: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. The 1.5-liter turbocharged engine delivers a maximum power of 110 kW and a maximum torque of 210 Nm, with the maximum power achieved at 5,600 rpm and the maximum torque available between 1,800 and 4,400 rpm. The 2.0-liter turbocharged engine produces a maximum power of 145 kW and a maximum torque of 345 Nm, with the maximum power achieved at 5,500 rpm and the maximum torque available between 2,000 and 3,200 rpm.

5

0

Share

Can You Still Drive with Reduced Engine Power?

It is possible to drive with reduced engine power. The causes of power reduction include engine carbon buildup, aging spark plugs, incorrect fuel octane rating, and engine system malfunctions. The solutions are: 1. Clean the engine promptly; 2. Spark plugs should be inspected and replaced every 20,000 to 30,000 kilometers; 3. The recommended fuel octane rating is labeled inside the fuel tank cap - always use fuel according to this specification; 4. Engine system failures caused by fuel line blockages can be resolved by timely cleaning. Engine working principles: 1. Mixing air and gasoline in a specific ratio to form a combustible mixture; 2. The intake stroke draws this mixture into the cylinder where compression ignition generates thermal energy; 3. High-temperature, high-pressure gases act on the piston crown, driving reciprocating linear motion that outputs mechanical energy through the connecting rod-crankshaft-flywheel mechanism.

15

4

Share

What causes the Phaeton's accelerator to be unresponsive?

Generally, it might be due to excessive carbon buildup in the engine. Below is relevant information: Regular maintenance: Regular oil changes not only make the engine run more smoothly and powerfully but also help inhibit the formation of carbon deposits inside the engine. Of course, fuel quality is also important; using the appropriate grade of gasoline from reputable gas stations ensures more complete combustion, resulting in less carbon buildup. For cars, engine oil is extremely important to the engine. Carbon cleaner: There are many carbon cleaners available on the market for removing carbon deposits, but they cannot achieve a thorough cleaning. Frequent use of such cleaners may cause corrosion and aging of rubber hoses. Generally, cleaning once a year or every 20,000 to 30,000 kilometers is sufficient, depending on the engine's condition. There's no need for disassembly unless absolutely necessary or if the engine is being disassembled for other reasons, in which case carbon cleaning can be done as a secondary procedure.

9

4

Share

What is the general electrode gap for spark plugs?

Spark plug electrode gaps are generally between 0.8-0.9mm. Methods to determine if a spark plug is damaged: Remove the spark plug and observe its condition based on the following appearance colors. A normal spark plug will have a skirt insulator and electrodes that appear gray-white, gray-yellow, or light brown. A properly functioning spark plug will have a skirt insulator that is reddish-brown, with an electrode gap between 0.8-0.9mm and no signs of electrode burning. If the spark plug has oil stains or deposits but is not damaged, it can continue to be used after cleaning off the oil and deposits. If the spark plug is severely damaged, showing signs such as blistering at the top, black streaks, cracks, or melted electrodes, the cause of the damage should be identified. After troubleshooting, replace the spark plug with a new one. Additionally, if the spark plug appears black as if smoked, it indicates that the wrong heat range was selected or the air-fuel mixture is too rich, with oil creeping up.

15

2

Share

Is it okay to park on a slope overnight?

Parking overnight on a slope is generally fine. However, if you frequently park on uneven ground or slopes for extended periods, it can cause damage to your vehicle. The impacts of long-term slope parking on cars include: 1. Damage to the handbrake system: When parked on an incline, the handbrake bears the brunt of the stress. The handbrake secures the vehicle by using cables to actuate brake shoes. On a slope, these cables continuously bear the vehicle's weight component parallel to the slope surface, which over time can lead to cable "fatigue," reducing braking effectiveness or even causing complete failure. Careless parking habits may result in rollaway accidents. 2. Suspension impact: During slope parking, the downhill-side suspension endures greater pressure. Prolonged exposure to this uneven load accelerates differential aging between front and rear suspensions, compromising ride comfort. 3. Rollaway risk: Extended slope parking accelerates handbrake wear, significantly increasing the likelihood of parking brake failure and potential vehicle rollaway incidents.

18

2

Share

What are the characteristics of German cars?

Why Does Stepping Harder on the Accelerator Cause a Burning Rubber Smell?

What is the issue with the Haval H6 transmission failure?

Can You Still Drive with Reduced Engine Power?

What causes the Phaeton's accelerator to be unresponsive?

What is the general electrode gap for spark plugs?

Is it okay to park on a slope overnight?

What to Do When the Manual Gear Lever Becomes Loose?

Should Brake Pads Be Replaced Along with Brake Discs?

Are Car Neck Pillows Safe or Dangerous?

What are the differences between the Haval H6 Platinum Edition and GT Edition?