What Are the Causes of Trunk Noise in a Car?

What are the symptoms of a broken compressor?

Compressor failure symptoms: 1. Winding short circuit, open circuit, and winding grounding against the casing; 2. Compressor vibration and noise; 3. Incomplete closing of compressor suction and discharge valves; 4. Compressor shaft seizure and cylinder jamming; 5. Thermal protector damage. The compressor is the heart of a car's air conditioning refrigeration system, responsible for compressing and transporting refrigerant vapor. Compressor functions: 1. Compressing air as power; 2. Compressing gases for synthesis and polymerization; 3. Compressing gases for oil hydrotreating; 4. Compressing air for refrigeration and gas separation; 5. Gas transportation after pressurization.

10

4

Share

What is the method for removing the wipers on the Nissan Qashqai?

Nissan Qashqai wiper removal method: 1. Fully raise the wiper arm and adjust the wiper blade angle; 2. Change the angle of the wiper blade to form a 90-degree angle with the wiper arm; 3. Position it at this angle to begin removal - lift the rubber blade, detach the entire wiper blade assembly, spread the rubber blade horizontally, then press down on the main bracket to completely remove the wiper blade assembly. The Nissan Qashqai's exterior dimensions are 4401mm in length, 1837mm in width, and 1593mm in height, with a wheelbase of 2646mm. The front and rear track widths are 1585mm and 1581mm respectively, and the curb weight is 1444kg.

20

0

Share

Which generation is the Honda L15BS engine?

Honda L15BS is the 2nd generation engine. Disadvantages of Honda L15BS: Carbon buildup may occur, and severe cases can lead to engine stalling. Performance of Honda L15BS: Over 110 horsepower at 1200 RPM. Features of Honda L15BS: In addition to improving power output and fuel economy, it also enhances engine warm-up speed. Honda L15BS: The new vehicle is equipped with a 1.5T engine coded L15BS, with a maximum power of 130kW (177 horsepower). For a compact SUV, the power is very strong. Referring to the acceleration level of the previous Civic, this XR-V's 0-100 km/h acceleration time is likely to be under 8 seconds.

10

0

Share

What's the reason a motorcycle can start without inserting the key?

Motorcycle can start without inserting the key is due to a damaged or worn key switch, which needs to be replaced. Specific steps for replacing the key switch: First, unscrew the screws fixing the instrument panel cover and open the cover. Reasons why the motorcycle doesn't respond when turning the key: The main cause of this fault lies in the battery connection. When troubleshooting, first check the fuse, then inspect the tightening screws on the battery terminals, and focus on examining the connecting wires from the battery to the main line. However, battery failure cannot be ruled out. The development of motorcycles is like climbing stairs, the higher you go, the more advanced they become.

9

3

Share

What to Do If Car Documents Are Lost?

If you lose something, you need to report it to the local police station. The police station will issue a certificate proving the loss of the invoice, and only then can the vehicle management office reissue other documents. If only the vehicle license is lost, you can directly apply for a replacement at the vehicle management office. Below are the required materials for applying for a replacement or renewal of the motor vehicle registration certificate: 1. 'Application Form for Replacement/Renewal of Motor Vehicle License Plates and Certificates'; 2. Proof of identity of the vehicle owner and a copy; 3. For replacing the motor vehicle registration certificate, a 'Stolen Vehicle Inquiry Form' must be submitted; 4. For renewing the motor vehicle registration certificate, the original motor vehicle registration certificate must be submitted; 5. If an agent handles the process, the agent's proof of identity and a copy must also be provided.

20

3

Share

Is It Necessary to Install Additional Sealing Strips on a Car Yourself?

Whether to install additional sealing strips on a car depends on individual circumstances. Functions of car sealing strips: Car sealing strips serve to fill various gaps and spaces between the components of the car body. They provide functions such as shock absorption, waterproofing, dust prevention, sound insulation, and decoration, thereby enhancing the comfort of the driving experience and protecting the car body. Disadvantages of sealing strips: The sound insulation effect is not very noticeable. After installing door sealing strips, they can easily become clogged, which may lead to poor drainage in the door. This can result in damage to the door window lift motor or rusting of the door panel. Additionally, the installation of sealing strips can affect the overall appearance of the car, making the doors more conspicuous. If the sealing strips fall off, the adhesive residue left on the car paint can be difficult to remove.

16

5

Share

What Are the Causes of Trunk Noise in a Car?

What are the symptoms of a broken compressor?

What is the method for removing the wipers on the Nissan Qashqai?

Which generation is the Honda L15BS engine?

What's the reason a motorcycle can start without inserting the key?

What to Do If Car Documents Are Lost?

Is It Necessary to Install Additional Sealing Strips on a Car Yourself?

Should the car's heating system use internal or external air circulation?

What is a Space Shuttle Bus?

What is the size of a parking space?

When can I take the Subject 4 exam after passing Subject 3 in the driving test?