···
Log in / Register

What are the causes of throttle pedal vibration?

4 Answers
CeciliaDella
07/29/25 6:24pm

The causes of throttle pedal vibration: 1. Engine-induced resonance transmitted through the vehicle body to the throttle pedal, causing vibration felt when the foot rests on the pedal. This is a normal phenomenon because cars use electronic throttle valves; 2. When the engine mount rubber leaks oil or ages and breaks, its shock absorption effect decreases, inevitably causing throttle pedal vibration; 3. Clutch slippage can also lead to throttle pedal vibration. In manual transmission and dual-clutch models, the power transfer and disconnection between the engine and transmission are accomplished by friction plate clutches. If the clutch plates are severely worn and slip or the damping springs break, it will cause throttle pedal vibration.

Was this review help?
12
5
Share
SanSteven
08/14/25 11:11am

I often experience throttle pedal vibration, which is mostly caused by unstable engine operation. For example, a worn-out spark plug or faulty ignition coil in a certain cylinder can lead to misfiring, transmitting engine vibrations to the pedal. Carbon buildup in the throttle body or fuel injectors can also affect air intake uniformity, causing vibrations. In manual transmission vehicles, worn clutch plates or an unbalanced driveshaft can similarly create such issues. In electronic throttle systems, contamination or damage to the pedal position sensor is a common cause. It's recommended to first check simple components, such as whether the spark plugs are clean and tire pressure is normal. If the vibration is severe and accompanied by abnormal noises, you should stop the vehicle immediately and seek professional diagnosis. Regular maintenance like cleaning the throttle body and replacing spark plugs can effectively prevent this annoying problem.

Was this review help?
4
0
Share
Expand All
VivianMarie
10/14/25 5:53am

My car's accelerator pedal used to vibrate severely during acceleration, and it was later discovered that the vibration from unbalanced tires was being transmitted to the pedal. After cleaning the throttle body, it improved significantly because carbon buildup can cause uneven engine air intake. A faulty electronic throttle sensor can also cause similar symptoms. It's recommended to check tire pressure and tread wear, and perform a wheel alignment if necessary. If the vibration occurs only at specific speeds, it might indicate loose drivetrain components. Don't ignore it—early intervention can save you from costly major repairs. I once had it fixed at a repair shop for a small fee, which was much more cost-effective than waiting until engine damage occurred.

Was this review help?
3
0
Share
Expand All
CodyAnn
11/27/25 6:48am

Throttle pedal vibration is common in electronically controlled vehicles, possibly caused by signal errors due to dirty pedal position sensors or ECU software bugs. Engine carbon buildup can also lead to unstable operation and transmit vibrations. It is recommended to use an OBD scanner to read fault codes for quick problem identification. If it's a hardware issue, replacing the sensor or updating the software can resolve it. Keeping the vehicle software up to date and regularly cleaning sensors can reduce vibration occurrences, preventing distractions while driving.

Was this review help?
1
5
Share
Expand All
More Forum Discussions

Piston Ring Replacement Method?

Here are the steps for replacing piston rings: 1. For the twist ring, the inner circular groove should face upward, while the outer circular groove ring's groove should face downward. 2. The small end of the taper-faced ring should face upward. 3. For rings with inner circular chamfers, the chamfer should face upward. 4. For rings with outer circular chamfers, the chamfer should face downward. 5. Some piston rings are marked with "TOP" or "0", "△" symbols on one side. During installation, the marked side must face upward. 6. Barrel-faced rings or chrome-plated rings should be installed in the first groove. 7. When installing a composite steel oil ring, first insert the expander into the groove, then install the upper and lower scraper rails, ensuring their openings are staggered by 180°.
17
2
Share

How to Tell if a Car is a Stock Vehicle When Buying?

Methods to identify a stock vehicle when purchasing a car are: 1. After a new car leaves the factory, various fluids, electronic components, batteries, rubber seals, and tires may deteriorate due to prolonged storage without periodic inspection and maintenance, leading to issues like moisture damage and aging. 2. For stock vehicles stored for too long, without proper warehouse management, the aging of electronic components and rubber products cannot be detected without professional testing equipment. Many overstocked vehicles may experience oil or power shortages. Additional information: 1. The term "stock vehicle" is specific to the automotive sales industry, referring to new cars that have remained unsold for an extended period after leaving the factory. 2. Generally, cars that have been in storage for over three months or six months are considered stock vehicles. For imported cars, due to the time-consuming processes of transportation, customs declaration, and clearance, the threshold is more lenient, typically classifying them as stock vehicles if stored for over six months or a year.
6
0
Share

How to Remove the Steering Wheel of a Baojun 730?

730 Baojun steering wheel removal method is: 1. Use a long screwdriver to poke the two holes behind the steering wheel to remove the steering wheel cover; 2. Disconnect the airbag connector, remove the screws, and take off the airbag assembly; 3. Remove the steering wheel screws to detach the steering wheel. Taking the 2021 Baojun 730 as an example, it belongs to the MPV category, with body dimensions of: length 4780mm, width 1780mm, height 1740mm, wheelbase of 2750mm, and a curb weight of 1500kg. The 2021 Baojun 730 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 147PS, maximum power of 108kW, maximum torque of 250Nm, paired with a 6-speed manual transmission.
3
0
Share

Can the Hongguang Mini not charge without a ground wire?

Wuling Hongguang Mini cannot charge without a ground wire. The Wuling Hongguang Mini is a micro-sized pure electric vehicle with the battery located beneath the chassis, incorporating multiple safety technologies. The vehicle charges using a standard household 220V three-pin power supply with a ground wire, with a charging power of less than 2kW and charging times of approximately 6 and 9 hours. Below is an introduction to the Wuling Hongguang Mini: 1. The Wuling Hongguang Mini is a microcar under SAIC-GM-Wuling, featuring a MacPherson independent front suspension and a multi-link non-independent rear suspension. 2. In terms of dimensions, it measures 2917mm in length, 1493mm in width, and 1621mm in height, with a wheelbase of 1940mm. It is powered by a rear-mounted single motor paired with a 1-speed fixed gear ratio transmission.
16
5
Share

Why Does the Car AC Blow Smelly Cold Air?

Foul odors from the car AC when blowing cold air may be caused by: 1. Dirty air conditioning ventilation ducts or a clogged cabin air filter. The cabin air filter should be replaced regularly, as an excessively dirty filter not only fails to function properly but also causes secondary pollution to the air entering the vehicle. To completely eliminate odors inside the car, it's essential to address the root cause. Under normal conditions, an OEM cabin air filter has a service life of one year or 30,000 kilometers. If the vehicle frequently operates in areas with poor air quality, the replacement interval should be shortened accordingly. 2. Long-term use of the AC evaporator can lead to mold growth due to moisture, resulting in unpleasant smells. Drivers should turn off the AC cooling 5 minutes before reaching their destination and switch to natural ventilation. This allows the temperature inside the AC ducts to return to normal before parking, preventing condensation due to temperature differences after turning off the engine. Keeping the AC ducts dry inhibits the growth of mold and fungi.
19
1
Share

How to Determine the Production Month from the VIN?

To determine the production date from the VIN, the 10th digit code indicates the manufacturing year. This digit can be found in the following locations: 1. On the vehicle's model nameplate; 2. On the left side of the dashboard; 3. Inside the engine compartment; 4. On the vehicle registration certificate; 5. On the lower left corner of the windshield. The VIN consists of 17 alphanumeric characters that identify the vehicle's manufacturer, engine, chassis number, and other specifications. The meaning of each digit in the VIN is as follows: 1. The 1st digit represents the geographic region; 2. The 2nd digit is the manufacturer code; 3. The 3rd digit is the vehicle type code; 4. Digits 4 to 8 indicate vehicle features; 5. The 9th digit is a check digit; 6. The 10th digit represents the model year; 7. The 11th digit indicates the assembly plant; 8. Digits 12 to 17 are the serial number.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.