What are the causes of the sunroof rattling in the Roewe RX5?

3 Answers
LeAlejandro
08/28/25 4:53am
The main cause of the sunroof rattling in the Roewe RX5 is usually due to prolonged use, where debris particles accumulate on the sliding rails. When the sunroof moves along these rails, it rubs against the debris, resulting in rattling noises. Therefore, it is essential to keep the sliding rails clean. The Roewe RX5 is a compact SUV with body dimensions of 4556 mm in length, 1855 mm in width, and 1719 mm in height, and a wheelbase of 2700 mm. In terms of exterior design, the front of the car features a large grille, complemented by chrome trim for decoration. The side profile showcases a three-dimensional waistline design that extends from the front fenders all the way to the rear, visually elongating the car's body.
Was this review help?
13
5
Share
SanEmiliano
09/10/25 3:21am
My own Roewe RX5's sunroof made noise for a while, which really annoyed me. Mainly, the sunroof track lacked sufficient lubrication, and over time, dust and leaves got stuck in it, causing friction noises; or the frame screws were loose, making creaking sounds on bumpy roads. I tried cleaning the track and spraying some regular lubricant, which helped a bit. For older cars, cracked rubber seals or aging plastic parts can also cause significant wear, affecting the seal and potentially leading to leaks, so it's important to check them regularly. When closing the sunroof, avoid using excessive force, and regular maintenance can save a lot of trouble—otherwise, repairs might cost time and money. In short, don’t ignore minor noises; it’s always reassuring to have a reliable shop check it out.
Was this review help?
17
3
Share
Expand All
Alyssa
10/24/25 4:09am
The other day while driving my Roewe RX5, the sunroof kept making a clicking noise, which got me thinking. It's common for such sounds to be caused by deformed tracks or dust buildup leading to friction, or loose parts like untightened screws causing issues. Additionally, wear and tear on the tracks themselves or misaligned frames can worsen the noise and even lead to water leakage. For a quick check, you can wipe the tracks clean with a cloth and try applying some lubricant. As someone who enjoys tinkering with cars, I believe addressing such minor issues early can prevent bigger troubles down the line. Maintenance isn't expensive, but the key is to develop good habits, like giving the car a quick inspection after washing—safety should never be taken lightly.
Was this review help?
18
0
Share
Expand All
More Forum Discussions

Under what circumstances is the L gear of the Sylphy used?

The L gear of the Sylphy is used when the vehicle speed is less than 20 km/h, the engine speed is below 3500 rpm, for starting on slopes, descending slopes in low gear, or for anti-skid purposes on snowy roads. The L gear is a low forward gear, and when descending long steep slopes or mountain roads, shifting to this gear can limit the vehicle's gear range. Taking the Sylphy 2021 Classic 1.6XE Manual Comfort Edition as an example: its dimensions are 4631mm in length, 1760mm in width, and 1503mm in height, with a wheelbase of 2700mm. It has a top speed of 188 km/h and is equipped with a 5-speed manual transmission.
6
1
Share

Is the Civic Jin Dong version a high-end or mid-range configuration?

The Civic Jin Dong version is a mid-range configuration. Taking the Civic 2019 220TURBO CVT Jin Dong version National VI as an example: it is a compact 4-door 5-seater sedan under Dongfeng Honda, with a length, width, and height of 4658mm, 1800mm, and 1416mm respectively, a wheelbase of 2700mm, equipped with a CVT continuously variable transmission, a top speed of 200 km/h, and a fuel tank capacity of 47L. The Civic 2019 220TURBO CVT Jin Dong version National VI uses a 1.5T inline 4-cylinder engine, with a maximum engine torque of 220 Nm and a maximum power of 130 kW. The front suspension type is MacPherson independent suspension, and the rear suspension type is multi-link independent suspension.
7
4
Share

What is the solution for the rattling sound in the Kia K5 engine?

The solutions for the rattling sound in the Kia K5 engine are: 1. Replace the sealing strip or install a quick-adhesive strip with a fluffy texture on the aged sealing strip to increase the sealing thickness and reduce friction; 2. Remove the connecting plate and clean it; 3. Reinstall the tires and tighten all the wheel hub screws to prevent omissions and potential safety hazards. Taking the K5 K5 2020 380T GT-Line Premium as an example: its dimensions are 4980mm in length, 1860mm in width, and 1445mm in height, with a wheelbase of 2900mm. It is equipped with an 8-speed automatic transmission and is a 4-door, 5-seater sedan.
3
0
Share

What is the Transmission Limp Mode in the Mondeo?

Mondeo's transmission limp mode is a protective function of the transmission system. When the transmission control module detects a fault, it will activate this protection mode by locking the transmission in a specific gear (usually a direct drive gear) to allow the driver to safely drive the vehicle to a repair shop for inspection. Solutions for transmission limp mode: When the transmission limp mode is activated, the vehicle requires immediate inspection. Continuing to drive with an existing transmission fault may result in certain operations being restricted. Main functions of a transmission: To alter the gear ratio, expand the range of torque and speed variations at the driving wheels to adapt to constantly changing driving conditions, while ensuring the engine operates under favorable conditions (higher power output with lower fuel consumption).
4
0
Share

Is it difficult to get a driver's license?

Whether it is difficult to get a driver's license depends on individual circumstances. The following is a partial introduction about the driver's license: Conditions for upgrading to a B1 license: You must have held a (C1) driver's license for more than three years and be between 21-50 years old. To apply for an upgrade to a (B1) license, you must have no demerit points in the current scoring cycle (this year) and the most recent scoring cycle (last year). You can then apply for the upgrade at the local vehicle management office in your registered residence. Age requirements: To apply for a city bus, large truck, trolleybus, or tram license, you must be between 20 and 50 years old; to apply for a medium-sized passenger vehicle license, you must be between 21 and 50 years old.
2
4
Share

What happens if you miss the Subject 4 exam without canceling the appointment?

Missing the Subject 4 exam without canceling the appointment will affect your next selection. Here is some information about the driving test: Driver's License: The full name of the driver's license is the motor vehicle driver's license, also known as a "driver's license," which is required by law for motor vehicle drivers to apply for. Exam Content: The exam subjects include traffic regulations and related knowledge, field driving, and road driving. The order of the exam subjects is traffic regulations and related knowledge (referred to as Subject 1), field driving (referred to as Subject 2), and road driving (referred to as Subject 3). During the exam process, if you fail the previous subject, the following subjects will not proceed. Each subject exam has two chances, and if you fail both times, the current exam will be terminated.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.