What are the causes of rear tire wear on the Baojun 730?

1 Answers
LiamDella
07/30/25 10:02am
Baojun 730 rear tire wear is caused by: 1. Inaccurate four-wheel alignment; 2. Incorrect toe adjustment; 3. Steering gear failure; 4. Uneven frame; 5. Inconsistent tire pressure. The Baojun 730 is an MPV with body dimensions of length 4780mm, width 1780mm, height 1740mm, a wheelbase of 2750mm, and a fuel tank capacity of 52 liters. It is equipped with a 1.5T turbocharged engine, delivering a maximum power of 108kW at 5200 rpm and a maximum torque of 250Nm, paired with a 6-speed manual transmission.
Was this review help?
14
0
Share
More Forum Discussions

Why is the car's recirculation button not responding?

The reason the car's recirculation button is not responding is that when the air conditioning's airflow adjustment knob is in the windshield defrost mode, the recirculation will automatically turn off. Below are the pros and cons of recirculation: 1. Pros: Recirculation mainly prevents external dust and harmful gases from entering the car in a timely and effective manner, such as when driving through smoke, dust, areas with strong odors, or in heavy traffic, blocking harmful exhaust emissions from the vehicle ahead. Recirculation can enhance the cooling and heating effects of the air conditioning and provides better insulation. 2. Cons: Prolonged use of recirculation can reduce the air quality inside the car, potentially causing dizziness or discomfort. It is advisable to use recirculation for a while and then switch to fresh air mode for a few minutes to allow fresh air into the car and improve air quality.
1
3
Share

Can you cross a combination of one dashed line and one solid line?

A combination of one dashed line and one solid line can be crossed. Here are some methods to prevent crossing solid lines: 1. Avoid changing lanes arbitrarily or crossing over before traffic light intersections: If you haven't changed back to the original lane in time, don't cross the line to return. Instead, find an intersection to make a U-turn. 2. Change lanes only when it's a dashed line: While driving, pay attention to the road markings. When turning, observe the directional signs on the ground to ensure neither the left nor right wheels cross the line when entering the turning lane. When encountering a combination of dashed and solid lines, check whether your direction of travel is on the dashed side.
1
5
Share

Is it serious if only 3 points remain on the driving license?

When only 3 points remain on the driving license, the situation is already very dangerous. Traffic violations on the road usually start with at least 3 points, so once all 12 points on the driving license are deducted, you will have to retake the driving test. Therefore, this situation is very serious. Below are the relevant details: 1. You can still drive normally, but violations are risky: Although the remaining 3 points allow you to drive on the road, if you commit a violation that deducts points, all the points on your license will be deducted, and you will have to retake the driving test. 2. Drive carefully: Follow traffic rules and try to avoid driving on unfamiliar roads to prevent accidental violations.
20
4
Share

How to Deal with Blurry Windshield in Rainy Weather?

Here are the solutions for dealing with a blurry windshield in rainy weather: 1. Use the air conditioning system: Turn on the fan and cooling switch inside the car, so that the cold air blows onto the glass, quickly dispersing the fog with fast and direct results. Alternatively, turn on the heating to make the glass temperature the same as the interior. Using warm air to defog may initially make the fog on the windshield heavier, but after a while, the warm air will dry the fog away. 2. Utilize the windows: Open the sunroof or windows to allow air convection inside the car. This helps the interior temperature gradually match the outside temperature, causing the fog to dissipate. If the weather is not too cold, you can also keep the sunroof open while driving to maintain the same temperature inside the car, making it less likely for fog to form again.
19
5
Share

How to Solve Excessive Fuel Injection Pulse Width?

Solutions for excessive fuel injection pulse width are as follows: 1. Check if the oxygen sensor and coolant temperature sensor are aging: Excessive fuel injection pulse width usually needs to be considered in conjunction with idle speed. If the idle speed is high and the pulse width is large, it is generally caused by inaccurate signals from the throttle position sensor or coolant temperature sensor. If the idle speed is normal but the pulse width is large, it is usually due to a faulty oxygen sensor. 2. Inaccurate closed-loop data received by the ECU: Among these data, the oxygen sensor and coolant temperature sensor are the main factors, though the intake pressure sensor and throttle position sensor cannot be ruled out. You can use a Bluetooth OBD scanner to check the vehicle's internal conditions or have the data rechecked by professionals at a testing station.
3
5
Share

How long to release the brake when the car shakes during hill start?

Release the brake when the car shakes for about five minutes during hill start. Here are the precautions for hill start: 1. Lift the clutch: When lifting the clutch, observe the RPM or engine sound. When the RPM meets the requirement or the engine emits a low sound, slow down the speed of lifting the clutch and then gently press the accelerator. 2. Prevent rolling: Before releasing the handbrake, it is best to observe the road conditions ahead. If it is an uphill or downhill, it is recommended to press the brake with the right foot, slowly release the clutch, and when the car starts to shake significantly, stabilize the clutch pedal with the left foot, slowly release the brake with the right foot, and when the car starts to move, completely release the brake.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.