What are the causes of poor engine acceleration?

1 Answers
BentleyLee
07/25/25 1:55am
Engine acceleration issues are primarily caused by incorrect ignition timing and low fuel pressure. Below are partial explanations for poor engine acceleration: 1. Incorrect ignition timing: Air leaks in the intake system; Malfunctioning throttle position sensor or mass airflow sensor; Poor injector performance; Abnormal operation of the exhaust gas recirculation system; Weak ignition signals, etc. 2. Diagnostics: Perform fault self-diagnosis to check for trouble codes. Malfunctions in components like the mass airflow sensor or throttle position sensor can significantly impact vehicle acceleration performance. Identify the root cause based on displayed trouble codes. Verify ignition timing.
Was this review help?
7
0
Share
More Forum Discussions

What are the signs of abnormal car tires?

When there is an abnormality in the tire, such as abnormal tire pressure, a warning light will illuminate. The tire pressure warning light resembles an exclamation mark enclosed in parentheses with a tread line at the bottom, similar to the tread pattern of a tire. The entire symbol looks like a cross-section of a tire. Relevant information about tire pressure is as follows: Introduction: Tire pressure, strictly speaking, refers to the air pressure inside the tire. In car maintenance, the engine is the heart of the car—damage to the engine can lead to the end of the car's life. Similarly, tire pressure is like the blood pressure of the car, and its level plays a crucial role in the car's performance and power. Hazards of excessive tire pressure: It reduces the friction and adhesion of the tire, affecting braking performance; it causes steering wheel vibration and deviation, reducing driving comfort.
19
4
Share

How to Tie the Rope Under the Car Cover?

The front strap is closed and can be slipped over the head during use. The rear strap is open and can be secured to the rear of the car with a buckle (other locks are also acceptable). It cannot be removed without a dedicated key. Then, use the spring hooks on both sides of the car cover to hook onto the lower edge of the car body, ensuring the cover is firmly fixed in place. In addition to cleaning and sun protection, the car cover also has a super water-repellent function, preventing damage from freezing in extremely cold weather. It effectively protects against falling objects, fireworks, and other accidental factors that could harm the vehicle. It also provides effective protection against theft of the vehicle and its accessories. However, the use of a car cover should be moderate. Owners without parking spaces must have a car cover, but it should not be used every day.
19
1
Share

What Materials Are Used to Make Tires?

The main material used in car tires is rubber. Rubber has excellent elasticity, making it ideal for reducing bumps during driving. However, natural rubber has inherent disadvantages in terms of wear resistance, heat resistance, and traction, making it prone to damage from friction. Here are some considerations when purchasing and using tires: When buying tires, always check the production date: Avoid purchasing tires with production dates that are too old. Tires are rubber products and will age even if not used. During regular use, frequently check tire pressure and the tire surface for any damage: The sidewalls of tires are relatively fragile, and if they are scratched or punctured, they cannot be repaired. It is recommended that car owners replace their tires every four years, even if the mileage driven within those four years is minimal.
9
5
Share

What Causes the Door to Show as Unclosed When It's Actually Shut Tight?

The door is shut but still shows as not properly closed, indicating a door sensor malfunction or an increased door gap causing insufficient contact. Relevant information about car doors is as follows: Introduction: The car door provides access for drivers and passengers while isolating external disturbances. It also helps mitigate side impacts to some extent and protects occupants. The vehicle's aesthetics are also related to the door's design. Standards for Door Quality: The quality of a car door is primarily reflected in its anti-collision performance, sealing performance, ease of opening and closing, and other functional indicators. Anti-collision performance is particularly crucial because during a side impact, the buffer distance is very short, making it easy for occupants to get injured.
19
5
Share

Can a 1 cm screw puncture a tire?

1 cm screw can puncture a tire. The functions of a tire are: 1. Transmit driving force, braking force, and steering force to achieve vehicle operation; 2. Support vehicle load; 3. Reduce and absorb vibrations and impact forces during driving, avoiding severe vibrations that may damage vehicle components. The maintenance methods for tires are: 1. Regularly clean stones in tire treads; 2. Minimize tire exposure to sunlight; 3. Promptly check tire pressure; 4. Pay attention to suspension maintenance; 5. Regularly inspect front wheel alignment; 6. Be mindful of driving habits, choose road surfaces carefully while driving, avoid objects that can puncture or scratch tires, and steer clear of chemical spills that may corrode tires.
9
4
Share

How to Apply for an Electronic Inspection Exemption Label?

Electronic Inspection Exemption Label Application Method: 1. Open the Traffic Management 12123 App; 2. Click on 'Apply for Inspection Exemption Label for Eligible Vehicles'; 3. Select the vehicle to proceed; 4. Fill in the application information; 5. Upon approval, the electronic certificate will be issued. The Electronic Inspection Exemption Label is applied for by the vehicle owner to the local vehicle management office within three months before the expiration of the vehicle's inspection validity period. Vehicle annual inspection time regulations are as follows: 1. For passenger transport vehicles, inspection is required once a year within the first 5 years, and every 6 months thereafter; 2. For cargo vehicles and large or medium-sized non-passenger transport vehicles, inspection is required once a year within the first 10 years, and every 6 months thereafter; 3. For small and mini non-passenger transport vehicles, two exemptions are allowed within the first 6 years, inspection is required once a year after 6 years, and every 6 months after 15 years.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.