What are the causes of oil leakage in the Corolla high-pressure fuel pump?

What is Cold Gear Shifting?

Cold gear shifting is a training method used in driving schools to familiarize learners with vehicle gear positions. It involves practicing gear shifting (without starting the engine) on a manual transmission car parked in place, requiring standardized movements consistent with actual driving operations. Below are specific techniques for vehicle gear shifting: 1. Downshift after deceleration: Increase speed before upshifting and reduce speed by releasing the throttle before downshifting. Always fully depress the clutch pedal before shifting, and operate the gear lever with light, quick, gentle, and precise movements. 2. Master the timing of gear shifting: Shift gears when the engine reaches around 2000 RPM. The downshift sequence depends on vehicle speed - generally downshift when engine RPM drops below approximately 1500 RPM. 3. Maintain smooth shifting motions: Fully depress the clutch in one motion and engage gears decisively. Familiarize yourself thoroughly with gear positions. If unable to engage a gear, shift to neutral, release the clutch briefly, then depress it again to successfully engage the gear.

12

5

Share

Why does ABS frequently engage during low-speed braking?

Reasons for ABS false engagement during low-speed braking are as follows: Reason 1: The sensing part of the ABS wheel speed sensor is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding vehicle speed signal. This prevents the ABS computer from determining the vehicle speed and the wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the wheel speed sensor and the signal ring to restore normal function. Reason 2: Poor signal quality due to loose connections between system lines or poor contact of the ABS relay can cause system malfunction. The most common issue is a loose connection of the wheel speed sensor wiring, which leads to faults. In such cases, the ABS computer's fault memory will also indicate poor wheel speed sensor signal quality. Solution: Check the line connections and reconnect any loose parts.

10

3

Share

Where is the windshield located?

The windshield is the layer of glass through which you look out to observe road conditions while driving. Below is some relevant information: 1. Introduction: The windshield of a car is generally designed as a large, single-piece curved surface with certain curvatures on all sides. This curved glass is a product that requires highly sophisticated technology, both in terms of the manufacturing process and the fitting during assembly, as it involves various aspects such as vehicle type, strength, heat insulation, and installation. 2. Maintenance methods: During regular glass maintenance, it is important to choose the appropriate windshield washer fluid based on the season and specific weather conditions. When the windshield surface appears blurry, cleaning it with the right washer fluid can significantly improve clarity. If you notice issues with glare or reflection at night, using washer fluid to wipe the glass can also help. Additionally, when driving on highways or in dusty conditions, the washer fluid may deplete quickly, so it is essential to replenish it promptly.

16

4

Share

What are the reasons why flooded roads affect driving safety and make passage difficult?

The reason is the inability to observe hidden potholes and raised road surfaces. Here are the relevant explanations: 1. Precautions for driving in rain: The first thing to note is the degree of tire wear. In good weather, even if the tire wear exceeds the limit, driving at low speeds in the city may not cause any problems. However, during rainy days, tires with excessive wear have poor drainage capacity, making the vehicle prone to skidding and creating danger in emergency situations. 2. Driving precautions: Develop the habit of fastening your seat belt when getting in the car. The importance of seat belts for driving safety is self-evident; always fasten your seat belt when entering the vehicle. However, there are always some people who feel that seat belts restrict their movement space or even find them uncomfortable and choose not to wear them. Make sure the car door is securely closed when driving.

16

1

Share

Can China Independently Manufacture Automotive Engines?

China is fully capable of independently producing automotive engines, although there are some gaps compared to engines from Western countries. China's automotive engines are not developed through national projects but are instead researched and developed by individual automotive companies. For example, Great Wall Motors' GW4C20B 2.0T gasoline engine and Changan Automobile's Blue Whale NE platform-developed 1.4T engine are both independently developed by enterprises. Classification of automotive engines: 1. According to the working method of the intake system: They can be divided into four types: naturally aspirated, turbocharged, mechanically supercharged, and dual-charged. 2. According to piston movement: They can be divided into reciprocating piston internal combustion engines and rotary piston engines. 3. According to cylinder arrangement: They include inline engines, V-type engines, W-type engines, and horizontally opposed engines. 4. According to the number of cylinders: They can be divided into single-cylinder engines and multi-cylinder engines. Modern cars mostly use three-cylinder, four-cylinder, six-cylinder, and eight-cylinder engines.

15

3

Share

Can a Temporary ID Card Be Used for Subject 2 Driving Test?

A temporary ID card can be used for the Subject 2 driving test. However, if you do not have a regular ID card and need to use a temporary one, you must inform the driving test instructor in advance and follow the arrangements made by the driving school. According to Article 19, Paragraph 1 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," "first-time applicants for a motor vehicle driver's license must fill out an application form and submit their identity proof." Therefore, a temporary ID card can be used to take the Subject 2 test. It is important to note that a temporary resident ID card is valid for three months. You can take the Subject 2 test within this validity period, but if it expires, you will not be allowed to enter the test site. Therefore, make sure to take the test before the temporary ID expires. If the temporary ID expires due to special circumstances, you should apply for a new regular ID card or temporary ID as soon as possible. Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. For small cars (C1/C2), the test includes five mandatory items: reversing into a parking space, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as the S-turn). Some regions may have a sixth item: highway card collection. According to Article 25 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" (Ministry of Public Security Order No. 123), starting from June 1, 2021, the slope stop and start test is no longer required for C2 and C5 license applicants. For large vehicles (AB licenses), Subject 2 includes 16 items as per the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": reversing into a parking space, passing continuous obstacles, curve driving, highway simulation test, width-limited gate, bumpy road, single-plank bridge, narrow road U-turn, slope stop and start, parallel parking, highway emergency handling, mountain road simulation, right-angle turns, rain and fog weather simulation, highway tire blowout, and tunnel simulation driving.

15

3

Share

What are the causes of oil leakage in the Corolla high-pressure fuel pump?

What is Cold Gear Shifting?

Why does ABS frequently engage during low-speed braking?

Where is the windshield located?

What are the reasons why flooded roads affect driving safety and make passage difficult?

Can China Independently Manufacture Automotive Engines?

Can a Temporary ID Card Be Used for Subject 2 Driving Test?

Launch Date of China 6 Emission Standard Fit in the Chinese Market?

Is the Front Tire Pressure Higher or the Rear Tire Pressure?

Is the Alpina B7 a BMW 7 Series?

When did the China III emission standard come into effect?