What Are the Causes of Insufficient Rear Tire Pressure?

What are the Penalty Standards for Using Passenger Vans to Transport Goods?

Using passenger vans (commonly known as "bread vans") for transporting goods is subject to fines, and the vehicle may be detained by the traffic management department of the public security authorities until the illegal status is rectified. The relevant regulations are as follows: According to the "Operating Procedures for Investigating and Handling Illegal Loading Violations," Article 3 stipulates: If there is suspicion of overloading goods and weighing equipment is required for verification, the vehicle should be directed to a designated location for inspection. If the verification result confirms overloading, the party involved shall be ordered to rectify the illegal behavior. If the party indicates that the illegal status can be immediately rectified, they shall be penalized according to the law, and the vehicle shall be released after the illegal status is eliminated. If the party refuses or is unable to immediately rectify the illegal status, an administrative compulsory measures certificate shall be issued, and the vehicle shall be detained. The "Procedures for Handling Road Traffic Safety Violations" stipulates in Article 6: Penalties such as warnings, fines, or temporary suspension of the motor vehicle driving license shall be decided by the traffic management department of the public security authorities at or above the county level.

4

Share

What Causes Sensor Failure?

The specific causes of sensor failure are as follows: 1. Fixed deviation failure mainly refers to a type of fault where the measured value of the sensor differs from the true value by a constant. The faulty measurement runs parallel to the fault-free measurement. 2. Drift failure is a type of fault where the difference between the sensor's measured value and the true value changes over time. The accuracy decreases, the sensor's measurement capability deteriorates, and the precision lowers. When the accuracy grade drops, the average value of the measurements does not change, but the variance of the measurements does. Relevant information is as follows: 1. A sensor is a device or apparatus that can sense a specified measured component and convert it into a usable signal according to a certain law. The output signal is generally an electrical quantity. It is usually composed of a sensitive element and a conversion element. 2. A sensor can sense the information of the measured object and transform the sensed information into an electrical signal or other required forms of information output according to a certain law, to meet the requirements of information transmission, processing, storage, display, recording, and control.

7

5

Share

What is the fuel consumption of the Excelle?

The comprehensive fuel consumption of the Excelle is 4.7-5.0L/100km. Currently, there are 5 models of the Excelle on sale: the CVT Luxury and CVT Elite models have a comprehensive fuel consumption of 5.0L/100km. The manual Elite model has a comprehensive fuel consumption of 4.7L/100km. The above figures are the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 5.3-6.4L/100km. Here are 5 tips to help reduce fuel consumption while driving: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed. Avoid suddenly pressing the accelerator hard, as this can multiply fuel consumption. Light acceleration, light braking, and early braking: While driving, gently press the accelerator to avoid sudden increases in engine speed and prevent the car from shaking during operation, making it more fuel-efficient. By anticipating road conditions and applying slow and even acceleration or braking, fuel economy can be improved by up to 20%. Maintain proper tire pressure: Keep the tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (approximately 0.2 in metric units relative to the standard pressure of 2.4), fuel consumption increases by 1%. Regular maintenance or vehicle inspection: Timely oil changes can reduce carbon buildup (carbon deposits can cause ignition issues, sluggish acceleration, increased fuel consumption, and in severe cases, even cylinder misfires). Regularly check and replace the air filter if dirty, and clean or replace the fuel injectors, spark plugs, and throttle body as per the recommended mileage. Close the windows while driving. Driving with windows open increases wind resistance, which in turn increases the resistance the car faces, requiring more power and thus increasing fuel consumption.

16

1

Share

What Causes the Clicking Sound from the Front Left Wheel of a Car?

This issue may be caused by damage to the suspension control arm or aging of the shock absorber buffer rubber. If this occurs, it is recommended to inspect the shock absorber buffer rubber and check whether the suspension control arm bushings have aged. Here is some relevant information: 1. The suspension is a crucial component of the chassis, connecting the wheels to the vehicle body. Without a suspension, the car cannot operate normally. 2. There are two types of car suspensions: independent suspension and non-independent suspension. 3. Common independent suspensions in cars include MacPherson strut, multi-link suspension, double-wishbone suspension, double A-arm suspension, and double ball joint suspension. Common non-independent suspensions include torsion beam suspension and solid axle suspension. 4. Independent suspensions are disconnected in the middle, meaning there is no connection between the two wheels on the same axle. As a result, there is no interference between the wheels on the same axle in cars with independent suspension. 5. Non-independent suspensions are connected in the middle, so there is some interference between the two wheels on the same axle in cars with non-independent suspension. This is also why independent suspensions offer better handling and ride comfort compared to non-independent suspensions. 6. The structure of a car's suspension affects its handling and ride comfort, and the tuning of the suspension by engineers also influences the car's handling and ride comfort.

13

0

Share

Why Are Used MG ZS Cars So Cheap?

There are two main reasons why used MG ZS cars are cheap: there are many models in the same segment with strong competitors, and the MG ZS has a low resale value due to its limited market presence, with fewer sales and service outlets nationwide, resulting in weak purchasing power and low resale value. Below are the relevant details: Many Competitors: There are numerous domestic car models in the same segment, and their performance capabilities are quite comparable. With many competitors, the only way to stand out is through configurations and promotional discounts, such as offering larger discounts during marketing campaigns, which ultimately leads to lower prices. Low Resale Value: Compared to other cars in the same segment, the MG ZS has a smaller market presence because MG 4S stores are hard to find in many cities. This raises concerns about post-purchase maintenance and repairs, contributing to its lower price. For example, the MG 6 has a very low resale value—51.26% in the first year, but by the fifth year, it drops to just 27.25%, indicating very poor performance.

10

2

Share

Is an annual physical examination and inspection required for a B2 license?

B2 driving license holders must undergo an inspection at the end of each scoring cycle. If there are no demerit points within a scoring cycle, the B2 license holder is exempt from the inspection for that cycle and does not need to submit a physical examination report, as the inspection is automatically passed. However, if demerit points are incurred, the holder must participate in the inspection and submit a physical condition certificate. Here are the relevant details: 1. According to Article 70, motor vehicle drivers must regularly undergo inspections by the traffic management department of the public security authority as stipulated by laws and administrative regulations. When renewing a motor vehicle driving license under Articles 57 and 58 of these regulations, drivers must also undergo inspection by the traffic management department of the public security authority. 2. Drivers holding licenses for large buses, tractors, urban buses, medium-sized buses, or large trucks must undergo inspection by the traffic management department of the public security authority within 30 days after the end of each scoring cycle. However, if there are no demerit points recorded within a scoring cycle, the inspection for that cycle is waived. 3. Drivers holding licenses for other permitted vehicle types, if involved in a traffic accident resulting in death and bearing equal or greater responsibility without having their license revoked, must undergo inspection by the traffic management department of the public security authority within 30 days after the end of the scoring cycle. Drivers may undergo inspection and submit physical condition certificates either at the place where the license was issued or elsewhere.

13

4

Share

What Are the Causes of Insufficient Rear Tire Pressure?

What are the Penalty Standards for Using Passenger Vans to Transport Goods?

What Causes Sensor Failure?

What is the fuel consumption of the Excelle?

What Causes the Clicking Sound from the Front Left Wheel of a Car?

Why Are Used MG ZS Cars So Cheap?

Is an annual physical examination and inspection required for a B2 license?

What is the reason for still experiencing shaking at 120 km/h after performing wheel balancing several times?

How to Eliminate Bluetooth Noise in Car Cigarette Lighter?

How Often Should You Recharge Your Car's Air Conditioning Refrigerant?

What is the purchase tax for motorcycles?