···
Log in / Register

What are the causes of insufficient oil in the first row cylinder combustion system?

4 Answers
Wright
07/29/25 10:32pm
The causes and solutions for insufficient oil in the first row cylinder combustion system are as follows: 1. The combustible mixture is too rich. Solution: For the inspection and diagnosis of a too-rich combustible mixture, focus on checking the carburetor and air filter to reduce the concentration of the combustible mixture. 2. Excessive oil content in the engine fuel. Solution: Reduce the oil content in the fuel. 3. Poor sealing of piston rings or crankshaft oil seals. Solution: Improve the sealing of piston rings or crankshaft oil seals. 4. Presence of water in the fuel. Solution: Replace with water-free fuel.
Was this review help?
11
0
Share
DelJulia
08/15/25 11:27pm
From my driving experience, insufficient fuel in the first cylinder bank is mostly due to a faulty fuel pump. I used to drive an old car that always felt like the engine was shaking on the highway. After inspection, I found out the pump was broken—it couldn’t move fuel, so the engine lacked power. Another common cause is clogged fuel injectors, where too much carbon buildup blocks the injector nozzles, preventing fuel flow. Sometimes, if the fuel filter hasn’t been replaced for too long, it gets clogged with impurities, restricting fuel flow and causing insufficient supply. This leads to sluggish acceleration, higher fuel consumption, and in severe cases, stalling on slopes or during turns, which is very dangerous. Now, I make sure to replace the filter every 20,000 kilometers and clean the fuel injection system regularly. I also check the fuel pump periodically. If anything seems off, I get it inspected immediately—safety first, don’t skimp on those small expenses.
Was this review help?
16
3
Share
Expand All
DiKeegan
10/18/25 3:28am
I usually enjoy fixing cars myself. Low fuel levels might be caused by simple small components, such as clogged or leaking fuel injectors. If you touch the fuel injector and hear unusual noises or find loose fuel line connections, it's likely causing insufficient fuel. Another possibility is a clogged fuel filter, where too much dirt blocks the fuel line. Last time my car had this issue, replacing the fuel filter for a little over a hundred bucks made a big difference. Problems with the fuel pump circuit can also prevent fuel from reaching the cylinders, often due to battery or relay failures. When fuel is low, the car drives like it's gasping for breath, lacks power when overtaking, and fuel consumption spikes instead. Try cleaning the fuel system or replacing parts yourself first—if that doesn’t work, then take it to a mechanic. It saves both time and money.
Was this review help?
7
3
Share
Expand All
VonWilliam
12/01/25 4:08am
Low oil volume in the first row of cylinders may be due to a faulty oil volume regulator. The car's computer controls fuel injection based on sensor data. If the sensor reports incorrectly, the computer will reduce fuel supply. Aging fuel injectors can also lead to insufficient fuel spray. Lack of oil causes engine shaking, slow acceleration, and a high risk of stalling when driving in the rain. Early inspection is recommended to prevent accidents.
Was this review help?
6
1
Share
Expand All
More Forum Discussions

What are the dimensions of the FAW-Volkswagen Tacqua?

The dimensions of the FAW-Volkswagen Tacqua are 4194mm in length, 1760mm in width, 2651mm in height, and a wheelbase of 2651mm. This car has advantages in the following aspects: 1. Exterior design. The new car features a dual waistline design on the side, showcasing a rugged yet youthful appearance. The roof rails, a must-have for crossover models, are also included, along with black plastic protectors and smoked alloy wheels, enhancing the car's practicality and fun factor. 2. Powertrain. The Tacqua offers young consumers two engine options: a 1.5L and a 1.4T. For those who prefer quick starts, aggressive overtaking, and thrilling acceleration, the 1.4T model is recommended, with a maximum power of 110kW and a maximum torque of 250N·m. 3. Side design. The Tacqua features dynamic and smooth waistline design, giving it a more attractive profile. Additionally, the detailed design on the door panels adds a strong sense of power. The rear design includes sleek LED taillights, which provide high visibility at night. Finally, the wheel arches and the aluminum alloy wheel design further enhance the Tacqua's visual appeal.
12
2
Share

What brand is Greenmax tires?

Greenmax is a product line under Linglong Tires, fully named GREENMax Green Drive, produced by Shandong Linglong Tire Co., Ltd. Here is an introduction about Linglong Tires: 1. Introduction: Shandong Linglong Tire Co., Ltd. is ranked among the world's top 20 tire manufacturers and is the second largest tire producer in China. The company covers an area of 2.4 million square meters with a building area of 900,000 square meters. It employs 8,500 staff members, including over 1,600 engineering technicians, and has total assets nearing 20 billion yuan. 2. Products: The leading tire products include bias tires, passenger and light truck radial tires, all-steel radial truck tires, special tires, and other ten major series, with nearly 2,000 specifications and varieties.
10
1
Share

What does the AST button in the car mean?

The AST on the car CD refers to automatic-broadcast-station-storage, which means automatic station memory. Using this button, the radio can automatically search and store stations. Here are other buttons on the car CD and their functions: 1. POWER/VOL (left rotary knob): Press to turn on/off, rotate to adjust volume. 2. TPK/MANU (right rotary knob): MP3 track selection and browsing. 3. RPT: Repeat playback in CD/USB mode.
15
5
Share

What does the 'R' on tires represent?

Tire 'R' represents radial tires (radial-tire). Radial tires are a type of tire structure, different from bias tires, arched tires, and pressure-adjusted tires, among others. More information about car tires is as follows: 1. Car tires are one of the important components of a car, directly in contact with the road surface, working together with the car suspension to mitigate the impact experienced during driving, ensuring good ride comfort and smooth driving. 2. Car tires can be divided into radial tires and bias tires according to their structure.
20
0
Share

What type of engine oil does the Lynk & Co 01 use?

Lynk & Co 01 uses Shell SN-grade engine oil with the specification 0W-20. If you want to change the engine oil during later maintenance, you can choose fully synthetic Mobil 1 Gold or Castrol Edge. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity—5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, ensuring smoother cold starts for the car. The latter number represents the oil's kinematic viscosity at 100°C. A higher value means the oil can maintain its viscosity under high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in a Lynk & Co 01 is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan. Use a wrench to loosen the drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out. Use a specialized wrench to remove the oil filter. Apply a thin layer of oil to the seal of the new oil filter and tighten it clockwise by hand. Pour the new engine oil into the oil filler cap on the engine valve cover, typically filling about three-quarters of the bottle. Start the engine and let it run for 5 minutes, checking for leaks around the drain plug and oil filter. If leaks are found, repairs should be made. After stopping the engine, pull out the dipstick to check that the oil level is within the standard range.
17
5
Share

What are the reasons why the Nissan X-Trail air conditioner is not cooling?

Reasons why the Chery car air conditioner is not cooling include insufficient refrigerant, severely clogged air filter, excessive debris on the surface of the evaporator, dirty condenser, refrigerant leakage, compressor damage, etc. Solution: Go to a repair shop to check whether the high and low pressure pipelines of the air conditioner are normal, whether the refrigerant is sufficient, whether the air filter is clogged, the working status of the compressor, etc., to troubleshoot the problem. Maintenance methods for car air conditioners: Comprehensive inspection of the air conditioner: When using the air conditioner for the first time in summer, first inspect the air conditioning system, such as checking the refrigerant and whether the air filter is too dirty through the liquid storage tank, whether there are foreign objects in the radiator, etc. Do not turn off the air conditioner immediately after parking: After arriving at the destination, car owners usually turn off the air conditioner and leave the car directly. Unlike in autumn and winter, the huge temperature difference between the inside and outside of the car in hot summer can cause the air conditioning system to become moldy, leading to the growth of mold. Therefore, car owners should turn off the cold air a few minutes before reaching the destination, turn on the natural wind, allow the temperature in the air conditioning pipes to rise, eliminate the temperature difference with the outside, thereby maintaining the relative dryness of the air conditioning system and avoiding mold reproduction.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.