What Are the Causes of Increased Engine Noise and Vibration?

2 Answers
DiKennedy
07/25/25 4:33am
The causes of increased engine noise and vibration include exhaust system blockage, insufficient power steering fluid, lack of engine oil, contaminants inside the engine, and loose engine belts. Below are detailed explanations and solutions: Exhaust system blockage: The engine produces a roaring sound and rapidly loses power. It is necessary to have the exhaust system checked at a professional repair shop. Insufficient power steering fluid: Unusual noises occur when accelerating or decelerating. This may be due to a lack of power steering fluid, which needs to be replenished. Lack of engine oil: Unusual noises during idling may be caused by insufficient engine oil or low oil pressure. Check the engine oil pressure or add oil as needed. Contaminants inside the engine: The engine makes a noise similar to a pencil tapping on a table, which increases with engine speed. This may indicate contaminants inside the engine. It is recommended to change the oil and oil filter. Loose engine belt: The engine produces a sharp noise, especially after turning on the air conditioning, which may be due to a slipping drive belt. Tightening the belt can resolve the issue.
Was this review help?
5
3
Share
CarlosDella
08/10/25 5:26pm
I think the engine noise has become louder and there's shaking, which is quite common, mainly due to some issues with the ignition system or fuel. For example, if the spark plugs are old and worn out, it can lead to uneven combustion, causing the engine to shake and produce buzzing noises. Also, clogged fuel injectors or dirt in the fuel lines can make the fuel supply unstable, making the engine work harder and produce louder sounds. If the air filter hasn't been replaced for a long time, the lack of airflow can make the engine struggle. Additionally, poor-quality or insufficient engine oil reduces lubrication, increasing friction and naturally making the noise louder. Carbon buildup is another key issue; when carbon deposits accumulate inside the engine, it can cause rough operation and shaking. I suggest not delaying and getting the spark plugs and these components checked early to avoid small problems turning into major repairs.
Was this review help?
18
2
Share
Expand All
More Forum Discussions

How Often Should Fuel Injectors Be Cleaned?

Fuel injectors should be cleaned every 2 years or every 50,000 to 80,000 kilometers. The performance of fuel injectors plays a fundamental role in the power output of every engine. Even if the injectors are slightly clogged, there's no need to panic, as impurities can be flushed away and dissolved during high-gear acceleration. It is recommended that drivers frequently drive at high speeds to reduce carbon buildup. Due to urban traffic congestion, cars often operate at low speeds or idle, which exacerbates the formation and accumulation of deposits. This can lead to issues such as incomplete intake valve sealing, sluggish acceleration, unstable engine idling, increased fuel consumption, and worsened exhaust emissions. Therefore, regular cleaning of fuel injectors is essential.
20
3
Share

How to Remove the Speed Limit on New National Standard Electric Bikes?

New national standard electric bike speed limit removal method: 1. With the power lock turned off, the kickstand up, and the motor hub stationary; 2. Turn the throttle to its maximum position (signal greater than 3V) while holding the brake; 3. Turn on the power lock; 4. Maintain the brake and fully turned throttle position for more than 10 seconds; 5. Completely release both the brake and throttle; 6. The speed limit switch is now permanently removed. With the increase in electric bikes, the national requirements for production quality and standards have also improved. New national standard electric bike models include: Yadea, Luyuan, Aima, Tailin, Xinri, and Xiaodao's A2 national standard version, among others. All these models have 3C mandatory certification.
3
1
Share

What is Yokohama Tire?

Yokohama, known in Chinese as Yokohama Tire (formerly called Yokohama Tire), is a brand of tires. The main models of Yokohama tires include 195/65R15 and 205/60R15. Tires are one of the essential components of a vehicle, directly contacting the road surface and working in conjunction with the vehicle's suspension to absorb shocks during driving, ensuring a comfortable ride and smooth driving experience. Tires are circular elastic rubber products mounted on various vehicles or machinery that roll on the ground. They are often used under complex and demanding conditions, enduring various deformations, loads, forces, and extreme temperatures during operation. Therefore, tires must possess high load-bearing capacity, traction performance, and cushioning ability, along with high wear resistance and flexibility, as well as low rolling resistance and heat generation.
19
3
Share

What does parking brake mean?

Parking brake refers to the manual brake installed in motor vehicles, commonly known as the handbrake. It is used to stabilize the vehicle after it comes to a stop, preventing accidents caused by rolling on inclined roads. The typical handbrake is usually positioned within easy reach of the driver's right hand for convenient operation. Some automatic transmission models on the market feature a foot brake located outside the driver's left foot, which serves the same function as the handbrake. Advanced models may also be equipped with an electronic parking brake system. Functions of the parking brake: Prevent the vehicle from rolling after stopping, assist in smooth starting on slopes, and serve as a temporary or supplementary emergency brake when the service brake fails. Under normal circumstances, the parking brake should not be used to slow down the vehicle before it comes to a complete stop. In all cases when parking, the driver must firmly pull the parking brake lever before leaving the vehicle. How to use the parking brake: To engage the parking brake, press the brake pedal down and pull the parking brake lever up fully. To release the parking brake, press the brake pedal down, slightly lift the parking brake lever, press the button on the handle with your thumb, and then lower the parking brake lever back to its original position.
18
2
Share

How to Coordinate the Clutch and Throttle When Shifting Gears in a Manual Transmission?

Manual transmission shifting clutch and throttle coordination method: First, place the gear in the neutral position, start the car and press the clutch pedal all the way down, then shift the gear into the 1st gear position. After that, slowly release the clutch. When you feel the car slightly vibrate and start to move forward, gradually press the throttle while continuing to release the clutch until it is completely released, ensuring the car starts smoothly. During normal driving, the left foot should rest on the car floor, not on the clutch pedal. This is because while driving, if the left foot is placed on the clutch, the inertia will exert pressure on the clutch, accelerating its wear.
16
2
Share

What are the advantages and disadvantages of rear-wheel drive vehicles?

The advantages of rear-wheel drive vehicles are: 1. Better handling feel with more balanced weight distribution between the front and rear wheels; 2. Smaller turning radius, making U-turns more efficient; 3. Increased traction, improving acceleration; 4. Easier maintenance. The disadvantages are: 1. Rear-wheel drive vehicles are prone to oversteering; 2. In rainy or snowy conditions, improper steering can easily cause the vehicle to spin in place. Rear-wheel drive means that the engine's power is transmitted to the rear wheels via the driveshaft, propelling the vehicle forward. This is a relatively traditional drive form, as most early cars were rear-wheel drive. Examples of rear-wheel drive vehicles include the Cadillac ATS-L, Infiniti Q50L, and Jaguar XEL.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.