What are the causes of engine vibration in the Xiali N5?

1 Answers
DeEverett
07/29/25 7:54pm
The causes of engine vibration in the Xiali N5 include the following points: Aging spark plugs: Spark plugs are inherently wear-prone components and need to be replaced periodically according to the maintenance manual. However, most car owners do not strictly adhere to the replacement intervals specified in the maintenance manual unless the car exhibits problems. Aging ignition coils: Although ignition coils are not considered wear-prone parts and most vehicle models do not require regular maintenance or replacement, they are one of the components with a relatively high failure rate in the engine. The ignition coil's function is to supply high-voltage pulse current to the spark plugs, which is closely related to the ignition performance of the cylinders. This is also a common fault. Damaged carbon canister or carbon canister solenoid valve: Since the fuel vapor released by the carbon canister is a significant factor in the engine's air-fuel mixture, any blockage in the carbon canister or damage to the solenoid valve can disrupt the balance of the mixture, leading to engine vibration.
Was this review help?
15
0
Share
More Forum Discussions

How to Turn Off the Auto Start-Stop Function in the New Qashqai?

The steps to turn off the auto start-stop function in the new Qashqai are: 1. Use the one-touch start button without pressing the brake to power on the vehicle; 2. Locate the engine start-stop control button, which is the leftmost button on the center console gear panel; 3. Press the button with the letter 'A' to deactivate the engine start-stop function. The Nissan Qashqai is positioned as a compact SUV, with body dimensions of 4401mm in length, 1837mm in width, and 1593mm in height, and a wheelbase of 2646mm. It is equipped with a 2.0L MR20 naturally aspirated engine, delivering a maximum power of 157PS and a peak torque of 204Nm, meeting the China VI emission standards. The transmission is still paired with a CVT gearbox.
7
5
Share

Where to Check the Tire Pressure Monitoring in the Honda Avancier?

The tire pressure monitoring in the Honda Avancier can be viewed on the instrument panel. When abnormal tire pressure is detected, a warning to check tire pressure will appear on the instrument panel. Within 4 to 5 seconds after starting the vehicle, the warning light may flash briefly, indicating that the calibration process is not yet complete, which is a normal reminder function. TPMS stands for Tire Pressure Monitoring System, which automatically monitors tire pressure in real-time while driving and alerts the driver to tire leaks or low pressure to ensure driving safety. A simpler version of the tire pressure monitoring system utilizes the existing ABS sensing function to compare the rotation counts of the tires. A tire with insufficient pressure has a shorter circumference, so if one of the four tires has low pressure, its rotation count will differ from the others during driving.
16
4
Share

Why is there always a gasoline smell in the car?

The reasons why there is always a gasoline smell in the car are: 1. Leakage at the gasoline pipe connection causes the gasoline smell to enter the car through the air conditioning system. Open the engine compartment cover to check for leaks, and if there is a leak, tighten the connection promptly or go to a repair shop for maintenance; 2. The rubber pipes in the engine compartment may age over time, especially in older vehicles, which can lead to gasoline leaking into the engine compartment; 3. Problems with the gasoline charcoal canister, such as overfilling the tank for a long time, can cause the activated carbon in the canister to become saturated and unable to restore its activity in time; 4. Incomplete combustion of gasoline, where fuel is expelled before it is fully burned. Gasoline is a volatile, flammable hydrocarbon mixture liquid distilled or cracked from petroleum and can be used as fuel.
18
3
Share

How Long Does the Entire Subject 2 Test Take?

Subject 2 test typically takes about 15 minutes. Here is some relevant information about the Subject 2 test: 1. Subject 2: Also known as the small road test, it is part of the motor vehicle driver's license assessment. It is the abbreviation for the field driving skill test. For small vehicles C1/C2, the test items include five mandatory tests: reverse parking, parallel parking, hill start and stop, right-angle turn, and curve driving (commonly known as S-curve). Some regions may include a sixth item, highway toll card collection. 2. No time limit for the entire Subject 2 test: There is no stipulated time limit for the entire Subject 2 test. However, the reverse parking must be completed within 210 seconds (starting from engaging the reverse gear), otherwise it will be considered a test failure. Parallel parking must be completed within 90 seconds, otherwise it will be considered a test failure. For hill start and stop, the vehicle must start moving uphill within 30 seconds after stopping.
15
0
Share

What maintenance should be done after driving 40,000 kilometers?

Maintenance items that should be done after driving 40,000 kilometers include: 1. Changing the engine oil and oil filter, which are required for every maintenance; 2. Checking the air filter and cabin air filter to see if they need replacement. If they are not severely dirty, they can be cleaned and reused, but if heavily soiled, they must be replaced promptly; 3. Fuel filter; 4. Thoroughly inspecting various fluids; 5. Checking the battery; 6. Replacing spark plugs; 7. Inspecting brake pads and tires. Generally, these components may not need replacement at 40,000 kilometers, but if any abnormalities are found, replacement is necessary. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as car servicing.
8
0
Share

How to Open the Front Hood of Roewe 360?

To open the front hood of the Roewe 360, follow these steps: 1. Locate the hood release lever near the door frame under the steering wheel and pull it to open the front hood; 2. There is a button on the left side of the front of the car—pressing it will also open the front hood. The Roewe 360 is a model under the SAIC Roewe brand, equipped with two powertrain options: a 1.4T and a 1.5L engine. The vehicle dimensions are 4579mm in length, 1804mm in width, and 1490mm in height, with a wheelbase of 2660mm. In terms of safety features, the Roewe 360 comes with an ESP body stability control system, side airbags, heated exterior mirrors, front and rear disc brakes, rear parking sensors, and a rearview camera system with dynamic guide lines, among other safety protections.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.