What are the causes of engine shaking at idle?

What does semi-engagement mean in a manual transmission car?

In a manual transmission car, semi-engagement refers to the intermediate transition zone where the clutch is neither fully engaged nor fully disengaged. In practical use, when the clutch is slowly released, the vehicle may shake or move forward slightly, indicating that it is in a semi-engaged state. This state, combined with the throttle, can be used to start the car or shift gears. Below are some details about semi-engagement: 1. When the engine is without load, the sound is relatively relaxed. If a load is added, meaning the clutch is lifted to the point where power transmission begins, the engine sound becomes deeper, especially noticeable when the car is under heavy load. 2. When the clutch is lifted to the semi-engagement position, the car will transition from a stationary state to motion with a noticeable shaking sensation. If you lightly place your hands on the steering wheel, you can easily feel this shaking. At this point, the clutch is precisely in the semi-engaged state.

18

0

Share

What is the normal water temperature for a BMW?

BMW's normal water temperature is 90 degrees Celsius, and the temperature will rise rapidly after the vehicle is started. Generally, after the car is started, the water temperature will rise quickly to 90 degrees Celsius and then stabilize, so it is best to start driving when the temperature reaches 90 degrees Celsius. The engine coolant temperature should not be too low or too high; it needs to be within a certain range. The normal temperature is indicated by the central position of the gauge at 90 degrees. After the vehicle is started, the antifreeze temperature rises quickly. Once the pointer reaches the central position, the heat exchange balances out, and the antifreeze temperature stops rising. Generally, it is optimal to start driving when the temperature reaches the middle position, which is also one of the reasons why it is necessary to warm up the car before driving. Common cooling system failures include coolant leaks, insufficient coolant, radiator fan malfunctions, and water pump failures. For optimal operation, a car engine requires a specific working temperature—neither too high nor too low—to ensure proper performance and efficiency. Conventional air cooling is often insufficient to dissipate the heat generated by the engine, which is why most car engines use a water-cooling system. The cooling system's role is to maintain the engine within the most favorable temperature range to enhance power output, reduce engine wear, and minimize fuel consumption. Both excessively high and low temperatures can adversely affect engine performance.

10

0

Share

Can a vehicle insured in another location be inspected locally?

Vehicle insurance purchased in another location can be used for local annual inspection. Vehicle Annual Inspection: Vehicles can undergo annual inspection in a different location. The procedure for entrusting an out-of-town annual inspection requires the vehicle owner to first apply to the original registration location before proceeding with the inspection. Moreover, an application must be submitted annually to the vehicle management office at the original registration location. Important Notes: If there are any unresolved traffic violations in the location where the vehicle is being used, they must be settled in advance. To process an entrusted out-of-town annual inspection, the following documents must be submitted: the vehicle's driving license, the original copy of the valid compulsory traffic insurance policy, and, if the process is delegated to another person, the agent's identity proof. The local vehicle management office will then issue a certificate for entrusting the out-of-town annual inspection, allowing the vehicle to be inspected at its current location of use. If a vehicle misses its inspection deadline, it can no longer apply for an out-of-town inspection. To avoid penalties, plan accordingly—inspections can be conducted up to 60 days in advance. Missing the deadline will result in a fine and a deduction of 3 points from the driver's license.

14

5

Share

Which Volkswagen models have letters beneath the emblem?

There are 5 Volkswagen models with letters beneath the emblem, namely the Phaeton, Phideon, Touareg, Teramont, and the 2019 Passat. Here are the introductions to these Volkswagen models: 1. Phaeton: The Volkswagen Phaeton is a top-tier luxury sedan produced by Volkswagen AG in Germany, with a hefty price tag. The highest trim level was equipped with a 6-liter W12 engine and a Tiptronic five-speed manual or automatic transmission. It is now discontinued. 2. Phideon: The Phideon is a premium sedan produced by Volkswagen AG in Germany and is also one of the models with letters beneath the emblem. It is powered by a 3.0T V6 gasoline engine with a maximum power output of 220 kW. 3. Touareg: The Touareg is an SUV produced by Volkswagen AG in Germany. The name 'Touareg' is derived from the Tuareg people, a nomadic ethnic group living around the Sahara Desert. 4. Teramont: The Teramont is a new mid-to-large-size SUV under SAIC Volkswagen, inspired by the design of the CrossBlue concept car. Volkswagen infused it with new design concepts, leading to the birth of the Teramont. Its rugged appearance and spacious interior have won the hearts of many consumers. 5. 2019 Passat: The Passat is a mid-size sedan designed by Volkswagen AG in Germany. The Passat adopts a new generation of design language, with more dynamic and refined body lines and contours compared to its predecessors.

16

0

Share

Does the Honda XR-V's Fuel Consumption Reach 10L?

The Honda XR-V has a combined fuel consumption of 6.0-6.3L/100km. Currently, there are 9 models of the Honda XR-V available for sale. The 1.5L-CVT Obsidian Edition, CVT Comfort Edition, and CVT Classic Edition have a combined fuel consumption of 6.0L/100km. The 1.5T-CVT Luxury Edition, CVT Flagship Edition, CVT Luxury Edition, CVT Comfort Edition, and CVT Obsidian Edition have a combined fuel consumption of 6.1L/100km. The manual Classic Edition has a combined fuel consumption of 6.3L/100km. The above figures are the NEDC combined fuel consumption, which represents the fuel consumption data measured under the NEDC test cycle. The actual fuel consumption is higher than this value, ranging from 6.0-11.0L/100km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before encountering a red light can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements typically produce more power, requiring more gasoline to burn and perform work. Cars with greater weight also have higher fuel consumption because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low during cold starts, the injected gasoline does not atomize easily, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine's computer controls higher RPMs to warm up the car, which also increases fuel consumption.

3

5

Share

Why does the ABS light stay on after vehicle inspection?

When a car displays the ABS light, it indicates a malfunction in the vehicle's Anti-lock Braking System. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, preventing the driver from decelerating or adjusting the vehicle's trajectory, which poses significant safety hazards. There are various states of the ABS light being on, with different causes and solutions for each state, as detailed below: State 1: ABS warning light stays on continuously (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle speed and the wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Poor signal due to loose connections in the system wiring or poor contact in the ABS relay, leading to system failure. Solution: Check the wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently turns on, but turns off when accelerating. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. As the engine speed increases and the voltage rises, the ABS indicator light turns off. This can also occur if the ABS system's power supply voltage is too low due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity; inspect the charging system; examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light stays on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; poor contact in the ABS hydraulic valve body's electrical connector; ABS computer malfunction. Solution: Loosen and then retighten the grounding screw of the hydraulic valve body, cleaning the contact surface if necessary; check if the connector's gap has widened; replace the ABS or ABS/ASR computer. State 4: ABS warning light turns on during high-speed driving. Cause: During high-speed driving, the ABS computer detects a significant discrepancy between the rear and front wheel speed signals; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the sticker near the fuel tank cap. State 5: ABS warning light intermittently turns on. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: With the engine running, depress the brake pedal and use a finger to push the brake switch linkage all the way down, then release the brake pedal to complete the self-setting position; replace the brake light switch if necessary.

18

5

Share

What are the causes of engine shaking at idle?

What does semi-engagement mean in a manual transmission car?

What is the normal water temperature for a BMW?

Can a vehicle insured in another location be inspected locally?

Which Volkswagen models have letters beneath the emblem?

Does the Honda XR-V's Fuel Consumption Reach 10L?

Why does the ABS light stay on after vehicle inspection?

What is the difference between the internal circulation and external circulation in a car?

How to Solve the Problem of Vehicle Exhaust?

Where is the jack located in the Wuling Hongguang?

Where is the fuel filler switch on the Buick Excelle?