What are the causes of clutch shudder?

1 Answers
LeEmilia
07/29/25 1:43am
Here are the reasons for clutch shudder: 1. Clutch shudder: Let the engine idle, engage a low gear, slowly release the clutch pedal and increase the throttle to start. If the vehicle body shakes at this time, it indicates clutch shudder. 2. Uneven distribution of positive pressure between the driving and driven discs: The uneven elasticity of the pressure springs in a frequently engaged clutch, inconsistent adjustment of the release levers, and/or uneven ends of the diaphragm spring fingers can lead to asynchronous pressure application, uneven force on the pressure plate, or even tilting of the pressure plate, resulting in poor contact between the driving and driven discs and causing clutch shudder. According to auto parts experts, the solution is to replace the clutch pressure springs and level the release levers. 3. Weakened damping spring elasticity: Weakened elasticity of the clutch torsional damping springs, weakened clutch pressure springs, or cracks in the diaphragm spring can all cause shudder when the clutch is engaged. The recommended solution is to replace the springs. 4. Poor contact of the clutch lining: Poor contact of the clutch lining, surface hardening, or adhesion of sticky substances can easily cause clutch shudder. In this case, the clutch lining should be re-bonded.
Was this review help?
7
5
Share
More Forum Discussions

Where is the tire pressure reset button for the Haval H2?

Haval H2's tire pressure reset button is located next to the left rear door. The tire pressure reset for this model requires the use of a computer and Great Wall's dedicated tire pressure matching device, so it needs to be done at a 4S shop. Tire pressure reset method for Haval H2: Start the vehicle, press the CAR button on the left side of the central display screen, use the steering wheel function buttons to select vehicle settings on the instrument screen, choose the tire option, and then click SET. At this point, the system will ask if the tire pressure values for all four tires match. After confirming that the displayed tire pressure matches the actual tire pressure, click confirm. The system will display "Tire Pressure Monitoring Initialization." Wait quietly for the system to complete the reset. Tire Pressure Reset: Tire pressure reset is the operation of resetting the tire pressure monitoring system after addressing a tire pressure fault. Cars usually have a tire pressure monitoring system that alerts drivers to tire leaks and abnormal tire pressure. The tire pressure monitoring indicator light will illuminate to ensure driving safety.
17
5
Share

How to activate the cruise control on the Lavida?

Method to activate the cruise control on the Lavida: Turn the switch to the ON position to enable cruise control; turn the switch to the OFF position to disable cruise control; when the vehicle speed reaches above 20 km/h, press the SET- button at the lower end of button B, and the speed will be stored after releasing. The dashboard indicator light will illuminate. When the cruise control system is turned off, the stored speed will be deleted. The Lavida is a model under SAIC Volkswagen, with body dimensions of 4605mm in length, 1765mm in width, and 1460mm in height, and a wheelbase of 2610mm. In terms of appearance, the Lavida features a sharp waistline design while retaining a side profile similar to the Octavia, and the rear and taillight designs are highly original.
6
2
Share

What engine is equipped in the Li ONE?

Li ONE is equipped with a 1.2-liter turbocharged three-cylinder engine, which delivers a maximum horsepower of 131 hp and reaches its peak power output at 5,500 rpm. This engine features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block. The vehicle is a dual-motor model, with electric motors on both the front and rear axles. The front axle motor has a maximum power output of 100 kW, while the rear axle motor delivers a maximum power of 140 kW. Li ONE is a mid-to-large-sized SUV with dimensions of 5,020 mm in length, 1,960 mm in width, and 1,760 mm in height, and a wheelbase of 2,935 mm. In terms of safety features, the car is equipped with ABS anti-lock braking system, brake force distribution, electronic stability control, roll stability control, seatbelt reminder, blind-spot monitoring, lane departure warning system, among others.
8
2
Share

Where is the computer connector in Renault vehicles?

The computer connector in Renault vehicles is located under the steering wheel, specifically an 8-pin socket beneath it. This diagnostic connector is primarily used to interface with the vehicle's onboard computer, allowing external computers to read operational parameters and vehicle status. It also enables adjustments to certain comfort module parameters within the onboard computer. With the correct access codes, it can even modify critical engine parameters. Renault is an automobile manufacturer and distributor headquartered in Boulogne, France. Taking the Koleos as an example, its dimensions are 4520mm in length, 1865mm in width, and 1715mm in height, with a wheelbase of 2690mm. Exterior-wise, the Koleos features a fashionable and expressive front-end design that exudes a trendy and dynamic vibe. The grille has been lowered overall, with the removal of the outer chrome frame, accentuating the SUV's bold and majestic character.
4
3
Share

What are the effects of revving the engine in neutral gear?

The effects of revving the engine in neutral gear include: 1. It can easily cause wear, burning, and abnormal noise in the input shaft bearings and synchronizers of the transmission; 2. Prolonged revving in neutral gear can lead to severe incomplete combustion; 3. Incomplete combustion is more likely to produce carbon deposits, which can clog the three-way catalytic converter, leading to abnormal high temperatures in the converter. High temperatures may cause wiring to self-ignite, with relatively serious consequences. Revving the engine in neutral gear is intended to help the engine achieve optimal internal lubrication and sealing in the shortest time possible. Apart from this, it only serves to increase fuel consumption, and short-term operation will not harm the engine. Revving the engine in neutral gear subjects the moving parts of the engine to significant inertial forces, affecting the engine's reliability and lifespan.
8
2
Share

Where is the fuel pump relay located in the Elysion?

Elysion fuel pump relay is located under the hood in the engine compartment, positioned between the transmission on the left side and the car battery. The Elysion is an MPV model under Dongfeng Honda, with dimensions of 4950mm in length, 1842mm in width, and 1711mm in height, a wheelbase of 2900mm, and a body style of a 5-door, 7-seat MPV. It features an ECVT continuously variable transmission. The vehicle is equipped with a 2.0L L4 engine with natural aspiration, delivering a maximum horsepower of 146ps and a peak torque of 175nm, capable of reaching a top speed of 160 km/h.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.