What Are the Causes of Car Water Leakage?

2 Answers
GraceLee
07/24/25 2:32pm
Car water leakage can be caused by different locations: 1. Door leakage: aging of window waterproof strips or blockage of door drainage holes; 2. Sunroof leakage: blockage of sunroof drainage holes; 3. Trunk leakage: poor sealing of trunk seals or poor sealing of tail light seals. The methods to deal with car water leakage are: 1. Use dry towels or water scooping tools to clean up the accumulated water in the car; 2. Identify the leakage location and repair it. The effects of car water leakage are: 1. The rubber strips of the sunroof and trunk will mold, and the metal will corrode; 2. Door leakage will damage the door lock and affect the window lifting system.
Was this review help?
14
1
Share
HenryMarie
08/11/25 8:18am
Car water leaks can be really annoying. Having worked in auto repair for many years, the most common issues I've seen are clogged sunroof drain holes or deteriorated seals. After rain, the car gets damp inside mainly because leaves and dirt block the drainage channels, allowing water to seep in. Another issue is cracked door seals—over time they harden and deform, letting rainwater trickle through the door gaps. If water leaks inside and soaks the floor mats, prolonged exposure can lead to mold, rust, and even damage to the AC system or wiring. Prevention is straightforward: I recommend clearing the sunroof and door drain holes every 2-3 months during car washes—just flush them with a hose and check seals for cracks. This is especially crucial before summer monsoons to avoid turning your car into a mobile reservoir.
Was this review help?
7
1
Share
Expand All
More Forum Discussions

Where is the fuel injector installed?

The fuel injector is located on the intake manifold or cylinder head. There are three main reasons for fuel injector sticking: 1. Excessive engine temperature: Poor cooling of the injector causes the fuel outlet valve to stick, while delayed fuel supply timing, excessive scale or blockage in the cooling water passage, wear on the water pump impeller end face, or prolonged engine overload can lead to engine overheating; 2. Wear of the fuel outlet valve: This results in fuel dripping when the injector stops spraying, causing carbon buildup on the injector nozzle and leading to sticking; 3. Manufacturing defects: For example, if the installation hole for the injector on the cylinder head is too tight, the clearance between the needle valve body and the cylinder head installation hole is too small, or the injector installation hole on the cylinder head is machined too deep.
13
3
Share

What to Do If You Don't Meet the Vision Requirements for a Driver's License?

Promptly visit a professional and reputable ophthalmology hospital for examination and correction. The motor vehicle driver's license examination consists of the following four parts: 1. Subject One: Road traffic rules, traffic signals, handling of traffic safety violations and accidents, regulations on the application and use of motor vehicle driver's licenses, motor vehicle registration, and other road traffic safety laws, regulations, and rules; 2. Subject Two: Testing skills such as reverse parking and stopping on a slope, assessing the candidate's mastery of motor vehicle driving skills and their ability to judge the spatial position of the vehicle; 3. Subject Three: Assessing the candidate's ability to complete driving tasks on the road, comply with traffic laws and regulations, and comprehensively control the vehicle; proper use of lights, horns, seat belts, and other devices; and the ability to correctly observe and judge road traffic conditions; 4. Subject Four: Separating the knowledge related to safe and civilized driving from the original "Subject One," along with safe driving skills under complex conditions and emergency handling in critical situations, conducted after the "Subject Three" practical road driving test to further evaluate the candidate's traffic awareness and skills.
2
3
Share

Can the car still run when the water temperature reaches 110 degrees?

When the car's water temperature reaches 110 degrees, it can still start, but it is necessary to warm up the engine first. An engine that is too cold can cause damage. The hazards of an engine being too cold are as follows: 1. Power reduction: The temperature of the mixture (or air) entering the cylinder is too low, resulting in poor quality of the combustible mixture, making ignition difficult or combustion slow, leading to a decrease in engine power and an increase in fuel consumption. 2. Corrosion of parts: Water vapor in the combustion products can easily condense into water and form acids with acidic gases, increasing the corrosion of the engine body and parts. 3. Increased wear: Unvaporized fuel washes away and dilutes the oil film on the surfaces of parts (cylinder walls, pistons, piston rings, etc.), accelerating the wear of parts.
6
0
Share

What is the difference between Changan Oushang and Changan Auto?

Changan Oushang and Changan Auto belong to the same company. The difference lies in the fact that Oushang is a Chinese automotive brand under the Changan Auto Group. Oushang Auto was established in April 2018 and is headquartered in Chongqing. Unlike Changan Auto, Oushang focuses on the passenger vehicle sector and is dedicated to providing quality driving and riding experiences for Chinese 'big families'. Relevant introductions are as follows: 1. Changan Auto Brand: Changan Auto is a well-known Chinese automobile manufacturer, owning popular car brands such as the CS series, Ruicheng, Yidong, Yuexiang, and Benben. 2. Introduction to Changan Oushang: Changan Oushang is a new family-oriented seven-seater vehicle launched by Changan Auto. It was developed and designed over three years by Changan's global R&D team from 'five countries and ten locations', showcasing Changan's latest design concepts and automobile manufacturing philosophy. It made its debut at the 2015 Shanghai Auto Show. The arrival of this vehicle will once again demonstrate Changan's R&D capabilities with its stunning design and excellent quality.
4
0
Share

Can a Car with Push-Button Start Be Stolen?

Cars equipped with push-button start are not easy to steal. Here are the specific features of the push-button start function: 1. Emergency Braking Function: During driving, if there is a need for an emergency stop or engine shutdown, pressing the start button three or more times in succession can immediately shut down the engine and complete the braking. Alternatively, if the car suddenly stalls while driving, the push-button start can also be used. Simply shift to neutral (N) and press the push-button start to restart the engine. However, it is important not to press the brake pedal during the entire process. 2. Automatic Power Cutoff: If you forget to turn off the power after shutting down the engine, the push-button start can protect the vehicle's system. The system will automatically cut off the power after the car has been stationary for ten minutes to prevent battery drain and protect the battery.
11
2
Share

Does the Car Navigation System Get Hot?

The car navigation system generates some heat during operation, but it does not become excessively hot. If the temperature rises too high while the navigation is working, you should immediately stop the vehicle for inspection and repair to avoid burning out the navigation system or even causing a fire. Additional Information: 1. Introduction to Car Navigation Systems: A car navigation system mainly consists of a host, display screen, operation keyboard (remote control), and antenna, enabling digital intelligent navigation for field surveys and travel. 2. Functions of Car Navigation Systems: (1) Navigation function. (2) Turn-by-turn voice prompt function. (3) Adding points of interest function. (4) Positioning function. (5) Speed measurement function. (6) Track recording function.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.