What are the causes of car vibration during startup?

1 Answers
Paislee
07/29/25 6:41pm
Causes of car vibration during startup: 1. Let the engine idle, engage low gear, slowly release the clutch pedal and increase throttle to start. If the car body shakes significantly, it indicates clutch shudder; 2. Driven plate rivet breakage or looseness, driven plate steel sheet fracture, or unbalanced rotating components can cause clutch shudder; 3. Loose engine mounting or misalignment between the transmission first shaft and the engine crankshaft centerline can also easily cause clutch shudder; 4. Poor contact of the clutch lining, surface hardening, or adhesion of sticky substances can easily cause clutch shudder; 5. When the driven plate is warped, skewed, or deformed, the clutch lining will have irregular contact during engagement, preventing smooth pressure increase.
Was this review help?
20
5
Share
More Forum Discussions

How to Adjust the Incorrect Time on Volkswagen Dashboard?

Insert the key into the ignition and turn it to power on the vehicle. There is a button each at the bottom left and right corners of the dashboard. Simply use these two buttons to quickly adjust the time.
11
3
Share

What does SJ15W40 engine oil mean?

SJ is the grade designation of the engine oil, and 15W40 represents the viscosity rating of the oil. Here, 15 indicates the lowest winter operating temperature of -20°C. The smaller the number before the 'W', the lower the low-temperature viscosity, the better the low-temperature fluidity, and the lower the applicable minimum temperature. Meanwhile, 40 represents the high-temperature viscosity, meaning the higher the number after the 'W', the higher the applicable maximum temperature. Additional notes on adding engine oil: 1. Higher viscosity does not necessarily mean better engine protection: High-viscosity oil not only adversely affects overall fuel consumption but also fails to protect the engine effectively. Another function of engine oil is cooling and heat dissipation. Blindly using high-viscosity oil will inevitably weaken the engine oil's heat dissipation performance. 2. Engine oils should not be mixed: The additive components in oils from different manufacturers are entirely different. The chemical compositions of these additives vary not only between brands but can also differ significantly within the same brand's different product lines. Mixing two brands of engine oil can cause chemical reactions under the engine's high temperatures, such as the formation of flocculants in the oil or an increase in viscosity.
12
3
Share

What are the reasons for the power steering warning light to illuminate?

The reason for the power steering warning light to illuminate is: a malfunction in the electronic power steering system. The automotive steering system is a collective term for a series of devices used to change or maintain the direction of a vehicle's movement, whether forward or backward. The function of this system is to control the direction of the vehicle according to the driver's intention, which is crucial for the safety of the vehicle. Both the automotive steering system and the braking system are two systems that must be given priority for vehicle safety. During driving, the vehicle needs to frequently change its direction as per the driver's commands. For wheeled vehicles, the method to achieve steering is through a specialized mechanism that allows the wheels (steering wheels) on the vehicle's steering axle (usually the front axle) to deflect at a certain angle relative to the vehicle's longitudinal axis. Even during straight-line driving, the steering wheels can be affected by lateral disturbances from the road surface, causing automatic deflection and altering the direction of travel. The driver can also use this mechanism to deflect the steering wheels in the opposite direction to restore the vehicle to its original course.
2
0
Share

What are the main components of engine oil?

Engine oil is primarily composed of base oil and additives. The base oil is the main component of lubricating oil, determining its fundamental properties; additives, on the other hand, compensate for and improve the deficiencies in the performance of the base oil, imparting certain new characteristics, making them an essential part of lubricating oil. The following is an introduction to engine oil: 1. Definition of engine oil: Engine oil is the lubricant used in engines, consisting of base oil and additives. 2. Functions of engine oil: As a type of machinery, engines have requirements for lubricants that share common aspects with general machinery, such as the need for appropriate viscosity, certain levels of oxidation resistance, wear resistance, corrosion prevention, and viscosity-temperature characteristics. The density of engine oil is approximately 0.91×10³ (kg/m³), and it serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and cushion vibrations in the engine.
11
1
Share

What do those letters on an automatic transmission car mean?

Automatic transmission cars have letters such as P, R, N, D, S, L, and M. P stands for Park, R for Reverse, N for Neutral, D for Drive, S for Sport mode, L for Low gear, and M for Manual mode. Here is an introduction to automatic transmissions: 1. Classification: An automatic transmission does not require the driver to manually shift gears. The vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. Generally, automatic transmission cars have six gear positions, arranged from top to bottom as P, R, N, D, S, and L. 2. Operation: Driving an automatic transmission car only requires the use of Park (P), Reverse (R), Neutral (N), and Drive (D) gears to meet general driving needs. However, in some special driving environments, other functional gears may be necessary.
4
4
Share

How to Pair the Remote Control?

Open the driver's side door, insert the key, and turn it on and off five times consecutively. On the fifth time, the hazard lights will flash once. At the same time, press and hold the lock and unlock buttons on the remote control you want to pair, and press them several times. The hazard lights will flash, and if they flash twice, it indicates that the remote control pairing is complete. Here is an introduction to pairing a car remote key: 1. Places to pair a car remote key: You can pair a car remote key at a 4S shop or a large repair shop, with the main difference being the price. 2. Functions of the remote key: A car remote key not only has remote control functions but also a primary function, which is anti-theft. Each remote key has a "code," which is also stored in the car's anti-theft system. Therefore, when pairing a new remote key, it needs to match the "code" in the car. 3. After pairing is completed: The new remote key can be activated, and the lost key will immediately become invalid. Even if someone finds the lost key, they can only open the door mechanically but cannot start the vehicle.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.