What are the causes of car shaking during acceleration?

1 Answers
McLondon
07/30/25 5:39am
Car shaking during acceleration is caused by: 1. Loose connection between the transmission and chassis; 2. Uneven engagement of the clutch pressure plate and clutch friction disc; 3. Insufficient throttle input or rapid clutch release; 4. Malfunctions in the intake system, ignition system, or fuel system; 5. Clogged fuel injectors. The hazards of car shaking during acceleration include: 1. Damage to the spark plugs, leading to poor ignition; 2. Increased carbon buildup in the fuel injectors; 3. Blockage of the throttle valve and intake passages; 4. Accelerated aging of engine components; 5. Damage to the clutch pressure plate; 6. Increased engine load.
Was this review help?
12
5
Share
More Forum Discussions

What Causes Excessive Wiper Blade Movement in Cars?

Excessive wiper blade movement in cars is caused by impurities or foreign objects on the wiper blades or glass surface, which increases resistance and causes shaking when the wipers reach certain positions. Below are the specific reasons for excessive wiper blade movement: Dirty Windshield: It may be due to a dirty windshield. Using professional glass cleaner and degreaser to thoroughly clean the glass can remove invisible surface deposits and oil stains. Frequent Dry Wiper Usage: Frequent use of wipers under abnormal conditions, such as dry wiping, can cause large-scale damage to the rubber contact surface of the wiper blades. It is important to correct this usage habit promptly.
1
1
Share

What does the Code 68 fault code in Buick mean?

Buick's Code 68 fault code is caused by battery issues, where there is corrosion at the battery terminals leading to poor connection. Buick models include: Buick GL8, Buick Excelle, Buick Regal, Buick LaCrosse, Buick Envision, etc. Taking the 2021 Buick GL8 as an example, it is an MPV with body dimensions of: length 5238mm, width 1878mm, height 1776mm, and a wheelbase of 3088mm. The 2021 Buick GL8 features front-wheel drive, equipped with a 2.0T turbocharged engine delivering a maximum horsepower of 237PS, maximum torque of 350Nm, and maximum power of 174kW, paired with a 9-speed automatic transmission.
5
5
Share

How to Remove Asphalt from Car Paint?

Removing asphalt from car paint involves the following steps: 1. Prepare asphalt cleaner and a clean towel; 2. Spray the cleaner 3 to 5 times on the areas with asphalt; 3. After about fifteen minutes, the asphalt will begin to dissolve; 4. Wet the towel with water, wring it out, and then wipe off the dissolved asphalt. Methods for maintaining car paint include: 1. Wash the car only after the engine has cooled down; 2. Minimize exposure to direct sunlight; 3. Clean any stains on the car body promptly; 4. Rinse the car with clean water after rain to prevent acid rain corrosion; 5. Apply wax or glaze regularly.
6
2
Share

What is the maximum horsepower of the Bugatti Veyron?

Bugatti Veyron has a maximum horsepower of 1001, and it is a hypercar under the Bugatti brand. This car is equipped with an 8.0-liter W16 quad-turbocharged engine. The dimensions of the Bugatti Veyron are 4470 mm in length, 1990 mm in width, and 1210 mm in height, with a wheelbase of 2710 mm. The body of the Bugatti Veyron is covered with various mathematical algorithms and scientific formulas. Importantly, these numbers and equations were also used by Bugatti engineers in the design and manufacturing of this Veyron. The color selection of this Veyron is also unique, featuring a metal rust effect, which makes the overall body look very beautiful and sexy, exuding a distinctive charm.
20
0
Share

What is the function of a bumper?

The functions of a bumper are: 1. Safety protection; 2. Absorbing external impacts; 3. Protecting pedestrians; 4. Decorative purpose; 5. Improving vehicle aerodynamics. A bumper consists of an outer panel, cushioning material, and a crossbeam. The outer panel and cushioning material are made of plastic, while the crossbeam is formed from cold-rolled sheet metal pressed into a U-shaped channel. The outer panel and cushioning material are attached to the crossbeam, which is then connected to the vehicle frame rails with screws. The bumper painting process includes: 1. Cleaning the bumper; 2. Drying; 3. Surface spraying; 4. Sanding and wiping; 5. Flame treatment; 6. Electrostatic dust removal; 7. Spraying operation; 8. Applying gray primer; 9. Spraying pre-mixed color paint, followed by clear coat, then baking and polishing.
15
0
Share

What to Do If You Lose Your Changan Car Key?

The solutions for losing a Changan car key are: 1. Use the spare key; 2. Contact a professional locksmith company; 3. Visit a 4S store to configure a new key; 4. Replace the entire vehicle lock. Methods for maintaining car keys include: 1. Avoid frequently placing them with metal items; 2. Do not store the spare key in the car door; 3. Prevent the smart key from falling or colliding; 4. Keep the smart key away from high-temperature environments or contact with liquids; 5. Do not place the key with electronic devices. Changan's vehicle models include: Changan CS35, Changan Yuexiang V3, Changan CS75, Changan Yuexiang V7, Changan Eado, etc.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.