What Are the Causes of Car Shaking?

Is Engine External Cleaning Necessary?

Engine external cleaning is necessary. The following are the impacts of not cleaning the engine for a long time: 1. A large amount of sludge will form and adhere to the inner walls of the cylinders. The resulting pressure directly hinders the smooth movement of the pistons, and the high temperature inside the engine cannot be dissipated through oil circulation, leading to a decrease in engine power and a sharp increase in fuel consumption. 2. Due to the presence of sludge, the lubrication effect is reduced. The sludge is difficult to dilute with oil, and the mechanical friction will intensify during cylinder movement, increasing the load on the crankshaft rotation and causing severe damage to the engine. 3. If the sludge is not cleaned for a long time, it will accumulate more and more. After noticing a decrease in engine power, even replacing the new oil cannot resolve the issue of space compression, and it may cause the new oil to deteriorate. During the cleaning process, hardened sludge may break off and block the oil passages, so it is recommended to have the cleaning done at a professional 4S shop.

12

3

Share

What is the difference between Mercedes-Benz G-Class and AMG?

The detailed differences between the Mercedes-AMG G-Class and the Mercedes-Benz G-Class: 1. Different naming: The standard G-Class is the G500, while the AMG version is the G63. 2. Power: The standard G-Class is equipped with a 4.0-liter V8 turbocharged engine, paired with a 9-speed automatic transmission, delivering a maximum power of 310 KW and a maximum torque of 610 N·m. The AMG G-Class is equipped with a 4.0-liter V8 turbocharged engine, paired with a 9-speed automatic transmission, delivering a maximum power of 430 KW and a maximum torque of 850 N·m. 3. Dimensions: The standard G-Class measures 4857x1931x1962 mm with a wheelbase of 2890 mm. The AMG G-Class measures 4864x1984x1974 mm with a wheelbase of 2890 mm. Some models have a height of 1964 mm.

2

0

Share

Why does the car make a rattling noise when starting?

This is caused by the engine oil temperature being too low and the ambient temperature being too low. When the engine oil temperature is too low, there is insufficient lubrication between the various components inside the engine. At this time, the friction between the components is relatively high, resulting in some abnormal noises. Engine oil primarily has three functions. Lubrication and friction reduction: It forms an oil film on the surfaces of two sliding components, preventing friction during operation and ensuring smooth movement of the components. Auxiliary cooling: When the engine is running, it generates high temperatures. When the oil reaches the operating parts, it absorbs heat and carries it away, aiding in the dissipation of heat from the components. Cleaning: It can carry carbon deposits, sludge, and worn metal particles from engine parts back to the oil tank through circulation. The flow of the lubricating oil washes away dirt generated on the working surfaces of the components.

7

5

Share

What is the difference between a twist throttle and a standard throttle grip?

The differences between a twist throttle and a standard throttle grip mainly consist of three aspects. Water ingress: The original throttle grip has a risk of water ingress during rain. The twist throttle does not have this risk. Installation location: The original is installed externally, while the twist throttle can be installed inside the vehicle body. The original throttle grip controls voltage from 0~5V and is installed externally, posing a risk of water ingress during rain, which can easily cause throttle failure after water enters. Throttle travel: The original throttle has a travel of 60% rotation, while the twist throttle has only 30% rotation for the entire travel. The twist throttle functions like a central control, with no external wiring, allowing the central part to be installed inside the vehicle body to prevent water ingress and subsequent throttle failure.

2

0

Share

Are There Many Flood-Damaged Cars in Ningbo?

There are quite a few flood-damaged cars in Ningbo. This does not mean that there are many water-damaged cars in Ningbo itself, but rather that flood-damaged car auctions are frequently held here, attracting many such vehicles from across the country for trading. Flood-damaged cars are also known as water-submerged vehicles. Overview of Flood-Damaged Cars: Flood-damaged cars refer to vehicles that have been submerged in water, typically involving the engine and transmission being soaked, with water levels exceeding the wheels and body seats, and prolonged contact between the vehicle's underbody components and water. These vehicles pose significant risks, as their electrical systems are prone to short circuits and fire hazards. Additional Information: While flood-damaged cars can be repaired to some extent, even after repairs, they still carry serious hidden dangers. The longer the immersion time, the higher the probability of malfunctions, and they cannot be completely restored.

7

0

Share

What is the tire brand of Changan CS75?

Changan CS75 uses Yokohama tires with the GEOLANDAR-G91 tread pattern. Here is some additional information: 1. Different front and rear wheel specifications for various vehicles: Most sedans have the same tire specifications for front and rear wheels, but some high-performance vehicles like sports cars or rear-wheel-drive models may have different front and rear tire specifications. International standard tire codes are expressed in millimeters, representing the section height and aspect ratio as a percentage. Smaller tire specifications reduce friction with the ground during driving, making them more fuel-efficient. However, larger tire specifications provide better grip, ensuring acceleration performance and body stability at high speeds. 2. Tire pressure: Tire pressure is critical for tire longevity—both overinflation and underinflation can shorten a tire's lifespan. Low pressure increases tire deformation, leading to excessive heat generation and rubber aging, ultimately increasing the contact area and accelerating shoulder wear. High pressure causes excessive stretching of tire cords, reducing elasticity and increasing the load on the vehicle during driving. In case of impact, this can lead to internal cracks or blowouts, while also accelerating tread wear and reducing puncture resistance.

1

4

Share

What Are the Causes of Car Shaking?

Is Engine External Cleaning Necessary?

What is the difference between Mercedes-Benz G-Class and AMG?

Why does the car make a rattling noise when starting?

What is the difference between a twist throttle and a standard throttle grip?

Are There Many Flood-Damaged Cars in Ningbo?

What is the tire brand of Changan CS75?

How to Determine if a Car is a Stock Vehicle?

What procedures are required for vehicle registration?

What Does the Buick Maintenance Light Indicator Look Like?

What is the urban fuel consumption of the Regal GS?