What are the causes of car engine fault alarms?

1 Answers
KimberlyRose
07/29/25 3:31pm
Engine fault alarms can be caused by the following reasons: 1. Abnormal engine oxygen sensor triggering the fault light: The engine oxygen sensor is usually placed near the intake manifold. Aggressive driving or collisions can cause the sensor to shift or become damaged, leading to sensor abnormalities and triggering the fault light. 2. Clogged fuel injectors and carbon buildup on intake valves: Impurities in gasoline can accumulate at the fuel injectors, affecting fuel injection, especially in direct-injection engines, which can directly cause engine shutdown. These impurities, after combustion, produce carbon deposits. When accumulated to a certain extent on the throttle valve, they can interfere with its normal operation, affecting engine performance and causing the warning light to illuminate. 3. Sensor faults: Abnormal sensors do not necessarily indicate a vehicle fault, but they do signal unusual conditions that require attention.
Was this review help?
18
4
Share
More Forum Discussions

How to Choose a License Plate Number?

Log in to the local traffic police website, click on the vehicle number selection system, enter your identity information, and after verification, enter the system. Here are some related introductions about license plate numbers: 1. The role of license plate numbers: A license plate number is the identification plate of a vehicle, and its significance to the vehicle is like that of an ID number to a person. License plates are used to number and register information for various vehicles. Their main function is to identify the region to which the vehicle belongs and to trace the owner and registration information of the vehicle based on the license plate. 2. Motor vehicle license plate numbers: Motor vehicle license plate numbers consist of the registration authority code and the plate number. For car license plates, the structure is divided into two rows: the upper row is the registration authority code, and the lower row is the plate number. The registration authority code is composed of 2 characters, including a Chinese character and an English letter. The Chinese character is the abbreviation of the province, autonomous region, or municipality directly under the central government, and the English letter is the code of the vehicle management office.
10
3
Share

How long does it take to upgrade from C1 to B1?

According to regulations, you can upgrade to a B1 license after holding a C1 license for more than three years. Requirements for upgrading to B1: Hold a C1 license for more than three years; No full-point record in the last two scoring cycles, no record of drunk driving, and no record of being primarily or fully responsible in a fatal accident; Age between 21 and 50; height above 155 cm. Driver's license physical examination requirements are as follows: Motor vehicle drivers aged 70 or older (including 70) must undergo an annual physical examination, while those under 70 do not need to. What is a C1 driver's license: The C1 driver's license is one of the codes for motor vehicle driver's licenses. The C1 license allows driving small and micro passenger vehicles, light and micro cargo vehicles; light, small, and micro special-purpose vehicles; and small passenger vehicles with seating capacity of 9 or fewer. Age requirements: The minimum age for a C1 license is 18, with no upper age limit. However, applicants aged 70 or older must pass tests for memory, judgment, and reaction abilities.
18
5
Share

What Causes the Abnormal Noise from the Driveshaft While Driving?

Car driveshaft abnormal noise is caused by a bent driveshaft or improper installation. The driveshaft is a high-speed, minimally supported rotating body, so its dynamic balance is crucial. Bent Driveshaft: The abnormal noise from the driveshaft is usually due to bending or denting, causing imbalance during operation, leading to wobbling and noise. Improper Installation: If the universal joint forks at both ends of the driveshaft are not installed on the same plane, or if the original balance weights are not reinstalled in their original positions, the balance state is disrupted. Loose connecting bolts of the universal joint coupling, loose fixing bolts of the driveshaft intermediate support, etc., can all cause abnormal noise from the driveshaft. Solutions for Driveshaft Abnormal Noise: Start the car engine and engage a high gear to observe the driveshaft wobble. If the wobble is greatest when the speed decreases, it indicates wobble and noise caused by imbalance; otherwise, it is noise caused by looseness. If the noise is not severe, drive back for repair; if severe, stop immediately for repair.
3
4
Share

What faults will occur if the vehicle body computer is damaged?

If the vehicle computer is damaged, the vehicle may experience abnormal display brightness, inability to lock or unlock, failure to start, unstable idle speed, increased fuel consumption, and other issues. Below is a related introduction: The role of the vehicle computer: The vehicle computer is like the human brain, as it can control the working conditions of various vehicle components. For a simple example, if the vehicle's oxygen sensor detects a high oxygen content in the exhaust, it can be determined that the engine is not burning completely at that time. Subsequently, the oxygen sensor will transmit this information to the vehicle computer, which will then control the fuel injection system's fuel volume to improve the vehicle's combustion efficiency, thereby reducing fuel consumption and emission pollution. Precautions: Generally speaking, unless subjected to short circuits, water immersion, or fire, the durability of the vehicle computer is very high, and it can usually last a lifetime.
19
4
Share

Is the BYD Yuan New Energy a plug-in hybrid?

BYD Yuan New Energy is not a plug-in hybrid vehicle; it is a pure electric vehicle. The BYD Yuan New Energy comes in two different horsepower variants: one with 95 horsepower and another with 163 horsepower. This is a single-motor model, and it uses a ternary lithium battery. Here is some related information about the BYD Yuan: 1. Most pure electric vehicles use ternary lithium batteries, which have higher energy density and are lighter in weight. 2. The front suspension of this vehicle uses a MacPherson independent suspension, while the rear suspension uses a torsion beam non-independent suspension. This is a small pure electric SUV, and there is not enough space in the rear to accommodate an independent suspension, so the torsion beam non-independent suspension is used for the rear suspension.
8
1
Share

How to Open the Trunk with the Key on the Binyue?

Here are the steps to open the trunk with the key on the Binyue: 1. First, press the trunk unlock button on the key (this does not pop open the door); 2. Then press the button on the door to open the trunk. Below is more information about the Binyue: 1. Exterior: The "Bin" series is a new lineup created by the Geely brand to cater to young consumers. It still features the familiar ripple-style family front grille and comes in two styles: sporty and standard. 2. Interior: The Binyue adopts a space-themed black and brown color scheme, with the dashboard designed in a wrap-around aircraft cockpit style.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.