What Are the Causes of Car Drifting?
2 Answers
Car drifting can be caused by the following reasons: 1. Uneven tire pressure; Uneven tire pressure, mainly caused by inconsistent tire pressure in the drive wheels, can lead to different levels of wear between the drive wheels and the ground. Different friction levels can directly cause drifting. 2. Abnormalities in the car's steering system; Abnormalities in the car's steering system can also result in drifting. For example, bending or deformation of the steering knuckle arm or steering knuckle usually causes the car to drift in one direction. The most severe case is when the tie rod ends are severely worn and become loose, leading to steering failure, which can cause the car to lose control completely. 3. Different tread patterns on the wheels or uneven tire wear on both sides. Using tires with different tread patterns or uneven wear on both sides can create different friction levels between the tires and the ground, leading to drifting during braking. If drifting is noticed while driving, it is advisable to stop and inspect the car immediately if conditions permit. If stopping is not immediately possible, find a safe place to park as soon as possible.
I have experienced steering deviation issues while driving, mainly related to tires. Uneven tire pressure is the most common cause—for example, if the left front tire is slightly underinflated, the car tends to pull toward that side. Uneven tire wear can also lead to deviation, especially when the tread depth differs between front tires, affecting grip. Additionally, poor wheel balancing can cause steering vibration and deviation at high speeds. Damage to the tire surface or punctures can also make driving unstable. I recommend checking tire pressure every month or so and keeping it at the standard value. When installing new tires, ensure proper wheel balancing. Replace severely worn tires promptly to maintain handling and safety. Avoid parking on curbs to reduce impact. Neglecting these small details can worsen deviation over time, potentially damaging other components and increasing repair costs.
