What are the causes of car body shaking?

2 Answers
DamianLee
07/24/25 3:48pm
Body shaking is mostly related to the clutch. The specific reasons are as follows: 1. When the car has been used for too long, the elasticity of the clutch pressure spring weakens, and cracks in the diaphragm spring can cause shaking when the clutch engages. The solution in this case is to replace the spring. 2. If the owner accidentally lets the engine idle, engages a low gear, slowly releases the clutch pedal, and accelerates to start, and the body shakes at this time, it indicates clutch shaking. 3. If the owner frequently experiences uneven elasticity of the clutch pressure spring, inconsistent adjustment of the separation levers, and/or an uneven diaphragm spring separation finger end, it can lead to unsynchronized pressure timing. Uneven force on the pressure plate will cause clutch shaking.
Was this review help?
13
3
Share
LeEvangeline
08/11/25 8:48am
I've seen plenty of cases of car body shaking, mainly caused by issues with tires, brake systems, or suspension. Things like unbalanced tires, uneven wear, or insufficient tire pressure can easily lead to vibrations, especially noticeable at high speeds. Worn brake discs or stuck calipers can also cause body tremors during braking. Additionally, aging suspension components, such as failed shock absorbers or loose control arms, can make the car unstable. I once encountered this situation while repairing a car - the owner experienced shaking on the highway, and we later found it was a front wheel balancing issue that was resolved after readjustment. To prevent such faults, it's recommended to regularly check tire pressure and condition, look for any stuck foreign objects, and perform wheel alignment in a timely manner.
Was this review help?
13
2
Share
Expand All
More Forum Discussions

Where to Set Up Keyless Entry?

Keyless entry does not require manual setup. It utilizes RFID technology, automatically locking and unlocking the doors through the chip in the smart card carried by the owner. This means when the owner approaches the vehicle within a certain distance, the door locks will automatically open and disable the anti-theft system. Conversely, when the owner moves away from the vehicle, the door locks will automatically engage and activate the anti-theft system. Vehicles equipped with keyless entry systems typically have a sensor button on the door handle, along with a keyhole as a backup in case the smart card is damaged or out of battery, allowing the owner to open the door conventionally. Once inside the vehicle, the onboard detection system immediately recognizes the smart card. After confirmation, the vehicle's computer system becomes operational, and the owner can start the vehicle by simply pressing the ignition button.
16
2
Share

What are the correct steps for shifting gears on a motorcycle?

The correct steps for shifting gears on a motorcycle are: 1. Pay attention to whether the motorcycle engine's gear is an international gear or a circulating gear; 2. When downshifting, use the brake and release the throttle grip to reduce the motorcycle's speed; 3. Pull the clutch lever to fully disengage the clutch, and do not accelerate at the same time; 4. Use the foot shift lever to shift from a higher gear to a lower gear or neutral; 5. If you want to stop, pull the clutch lever, brake until the motorcycle stops, and shift to neutral. Precautions for shifting gears include: 1. The clutch engagement must be complete, as incomplete engagement or not fully engaged will cause the engine to idle; 2. Upshifting should be done step by step, while downshifting can skip gears, and any gear can be used to stop; 3. Accelerate before upshifting and decelerate before downshifting.
11
4
Share

What is the actual fuel consumption of the Trax?

The comprehensive fuel consumption of the Trax is 5.5-5.6L/100km. Currently, there are 5 models of the Trax available for sale: the Auto Fun Edition True Orange Limited Edition, Auto Fun Edition China VI, Auto Sport Edition China VI, with a comprehensive fuel consumption of 5.5L/100km. The CVT Premium Edition China VI and CVT Extreme Edition China VI have a comprehensive fuel consumption of 5.6L/100km. The above figures are NEDC comprehensive fuel consumption, which are the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 5.5-8.0L/100km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase a car's fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before encountering a red light, can increase fuel consumption. The car itself: Cars with larger displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean greater power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the gasoline injected during a cold start does not atomize easily, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
20
4
Share

What are the criteria for a vehicle to be declared a total loss?

The criteria for a vehicle to be declared a total loss are when the insured vehicle is completely destroyed or severely damaged, and the actual repair costs reach or exceed 80% of the vehicle's actual value. Upon mutual agreement between the insurer and the insured, the vehicle is deemed a constructive total loss, and the insurer compensates according to the regulations for total loss of the insured vehicle. There are two scenarios for compensation in the event of a total loss: 1. If the insured amount is higher than the actual value of the vehicle at the time of the incident, the compensation should be calculated based on the actual value at the time of the incident. 2. If the insured amount is equal to or lower than the actual value of the vehicle at the time of the incident, the compensation should be calculated based on the insured amount.
17
1
Share

Can the four wheel hubs be swapped randomly?

Can the four wheel hubs be swapped randomly? However, if the vehicle is equipped with a tire pressure monitoring system, the tire pressure monitoring sensors need to be transferred to the new wheel hubs, and the tire pressure monitoring system should be reset. If the system is not reset after swapping the wheels, it may trigger a tire pressure warning and fail to display normal tire pressure information. Therefore, it is advisable to promptly reset the tire pressure monitoring system. The wheel hub is a cylindrical metal component that supports the tire from the inside and is mounted on the axle. It is also known as a rim or steel wheel. Depending on the characteristics and requirements of different vehicle models, the surface treatment process of the wheel hub may vary, generally categorized into painting and plating.
15
3
Share

How to Apply for a Lifetime Exemption from Driver's License Inspection?

The method to apply for a lifetime exemption from driver's license inspection is: 1. If the motor vehicle driver has not accumulated 12 penalty points in any scoring cycle during the 6-year validity period of the motor vehicle driver's license, they can renew it for a 10-year valid motor vehicle driver's license; 2. If the motor vehicle driver has not accumulated 12 penalty points in any scoring cycle during the 10-year validity period of the motor vehicle driver's license, they can renew it for a long-term valid motor vehicle driver's license, which is a lifetime exemption from inspection, provided that no major traffic accidents have occurred. The full name of the driver's license is the motor vehicle driver's license, which is a certification document issued by the government transportation department to individuals who are qualified to drive, usually in the form of a card. To obtain a driver's license, one must meet the age requirement and pass the driving test.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.