What are the causes of abnormal noises in the Mercedes-Benz C200?

1 Answers
DelMiles
07/29/25 6:46pm
The main causes of abnormal noises in the Mercedes-Benz C200 can be attributed to two major aspects: the engine and the transmission. Engine noise during startup: The primary reasons for engine noise during startup include the use of inappropriate engine oil, valve issues, and carbon buildup inside the engine. It is recommended to check the type of engine oil being used. Mercedes-Benz engines operate at high temperatures and pressures, requiring specific oil quality and viscosity. Typically, a 40-grade full synthetic oil is used. If a lower viscosity oil, such as a 30-grade, is used, it can lead to abnormal engine noises and increased sound levels. It is best to use a high-quality 40-grade oil. Transmission issues: Transmission problems are mainly caused by bearing damage, contaminated or poor-quality transmission fluid, loose or misaligned gear engagement, etc. For the transmission, it is essential to check whether the transmission fluid level is adequate, its quality meets standards, and whether it is contaminated or contains foreign particles. If such issues are found with the transmission fluid, it should be promptly topped up or replaced.
Was this review help?
10
3
Share
More Forum Discussions

What are the three major components of a car?

The three major components of a car are: engine, transmission, and chassis. The function of the engine is: to convert the thermal energy of gasoline or diesel into mechanical energy by burning and expanding the gas in a sealed cylinder, thereby pushing the piston to perform work. The function of the transmission is: to change the transmission ratio, expand the range of torque and speed changes of the driving wheels, adapt to frequently changing driving conditions, and allow the engine to operate under favorable working conditions. The function of the chassis is: to support and install the car engine and its various components and assemblies, form the body shape, receive the power from the engine, enable the car to move, and maintain normal driving.
16
0
Share

How to Jump Start a Car with Dead Battery?

The method to jump start a car with a dead battery is as follows: 1. Turn off the engine; 2. Take out the positive and negative cables of the jumper wires; 3. Remove the clips to open the battery protective cover, exposing the positive and negative terminals of the battery; 4. Connect one end of a jumper cable to the positive terminal of the dead battery and the other end to the positive terminal of the live battery; 5. Take another jumper cable, connect one end to the negative terminal of the live battery, and then connect the other end to the engine block or body of the dead car. Remember to connect negative to negative; 6. Start the car with the live battery. The reasons for a car battery dying are: 1. The alternator is damaged and cannot charge the battery; 2. The car's electrical appliances were not turned off; 3. There is a short circuit in the car's wiring.
13
0
Share

Should the electronic parking brake be turned off when starting?

When starting, the electronic parking brake should be turned off. The method of using the electronic parking brake is as follows: 1. To activate the electronic parking brake, step on the brake pedal and pull up the electronic parking brake switch until the indicator light on the dashboard lights up, and the indicator light on the switch also lights up; 2. To deactivate the electronic parking brake, press the electronic parking brake switch while stepping on the brake, and the indicator lights on the dashboard and the switch will turn off. The structural principle of the electronic parking brake is the application of electronic parking brake technology in automobiles, which is a caliper-integrated electronic parking brake system. This system replaces traditional parking brake levers, mechanical linkages, and control cables with electronic buttons and motor components. When parking, after the driver operates the electronic button of the electronic parking brake system, the electronic control unit will control the motor integrated in the left and right brake calipers to move, driving the brake caliper piston to generate mechanical clamping force, thereby completing the parking process.
12
5
Share

What is the method to determine the position of the right wheel of a car?

To determine the position of the right wheel of a car, when the vehicle is driving normally in the lane, the right wheel will press on the center line when the ground's center line overlaps with the right wiper on the hood. The method to judge the distance of the car by looking at the rearview mirror is: 1. Use the center of the rearview mirror as the reference line. When the car body is on the outer side of the reference line and the rear vehicle cannot be seen completely, the distance is 5 meters; 2. When the rear vehicle can fully appear in the rearview mirror and the car body presses on the reference line, the distance is 10 meters; 3. When the rear vehicle presses on the central axis of the rearview mirror and there is still a car's width between the vehicle in the rearview mirror and the outer edge of the rearview mirror, the distance is 15 meters.
5
5
Share

How to Set the Time on a Chery Fengyun 2?

The method to set the time on a Chery Fengyun 2 is as follows: 1. Insert the car key into the 'on' position or start the vehicle. There is a small knob on the dashboard; rotate it to the right and hold until you see the time on the dashboard flashing. 2. Release the knob, then rotate it to the right step by step to adjust the hours and minutes. Taking the 2016 Chery Fengyun 2 as an example, its body dimensions are: length 4188mm, width 1686mm, height 1480mm, with a wheelbase of 2527mm. The 2016 Chery Fengyun 2 features a MacPherson independent front suspension and a torsion beam non-independent rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 109ps, maximum power of 80kw, and maximum torque of 140nm, paired with a 5-speed manual transmission.
11
4
Share

What does the Magotan window convenience control mean?

Magotan window convenience control refers to a system where the car window glass can be controlled to rise or lower into position with a single button press. The functions of the windows are: 1. To shield from wind and rain, and reduce noise; 2. To lower wind resistance and guide airflow; 3. To protect the safety of passengers; 4. To reduce the temperature inside the car. Taking the 2020 Magotan as an example, it is a mid-size car with body dimensions of: length 4865mm, width 1832mm, height 1471mm, and a wheelbase of 2871mm. The 2020 Magotan features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum torque of 250Nm, and a maximum power of 110kW, paired with a 7-speed dual-clutch transmission.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.