What are the causes of abnormal noise from the right front wheel of a car?

1 Answers
OMelanie
07/25/25 1:51pm
The causes of abnormal noise could be: 1. Deformation of the shock absorber spring, which should be replaced immediately. 2. Aging or abnormal wear of the shock absorber plane bearing, which should be replaced or lubricated. 3. Oil leakage or bending of the shock absorber itself, which should be replaced immediately. 4. It could also be abnormal noise from the wheel bearing. The following are the steps to deal with abnormal noise: 1. Check whether the shock absorber is leaking oil. Look directly at the shock absorber shell or dust cover when it is not raining or the car has not been washed. 2. When driving at low speed, there is a knocking sound when the wheel passes over a bump on the road or there is slight vibration. The abnormal noise of the shock absorber is different from other chassis noises, it is very dull. If it is the front shock absorber, there will also be obvious vibration on the steering wheel.
Was this review help?
13
4
Share
More Forum Discussions

How to Turn Off the Auto Start-Stop on Vios?

The method to turn off the auto start-stop on Vios is to directly press the auto start-stop button, and the dashboard will notify the owner that the system is turned off. The Vios is a 4-door, 5-seater compact sedan under FAW Toyota. Taking the Vios 2021 1.5L Manual Forward Edition as an example: its body dimensions are 4435 mm in length, 1700 mm in width, and 1490 mm in height, with a wheelbase of 2550 mm, a minimum ground clearance of 160 mm, and a fuel tank capacity of 42 liters. The Vios 2021 1.5L Manual Forward Edition is equipped with a 1.5L L4 naturally aspirated engine, delivering a maximum horsepower of 110 hp, a maximum power of 81 kW at 6000 rpm, and a maximum torque of 138 Nm at 4200 rpm.
14
4
Share

What brand is the audio system in the Toyota Crown?

Toyota Crown uses the original Toyota audio system. Here is a detailed introduction to the Toyota Crown audio brand: 1. The internal part number is 86160-ON220, 20W. Some also say that the audio system is OEM-produced by Toyota and manufactured by brands such as Sony and Panasonic. 2. The Toyota Crown is equipped with a 10-speaker original audio system, with a relatively traditional 3-2-2-3 speaker layout. 3. As a representative model of Japanese luxury cars, the new Crown's original audio system features a two-way five-speaker design for both front and rear rows, with the speaker layout more inclined toward the front passengers. The car emphasizes mid-to-low frequency performance. The original audio system in the Crown performs exceptionally well in the midrange, making it more suitable for playing classical music, which aligns perfectly with the car's positioning. In contrast to restless youth, the Crown aims to showcase a unique elegance and composure. The mid-to-high frequency speakers in the front row are placed on the dashboard, relatively far from the front passengers, so some sound waves refract through the windshield to the ears, causing a slight shift in the sound field.
6
4
Share

Where should the ETC for trucks be installed?

The ETC installation position for trucks is in the middle-lower part. ETC installation requirements: the height should not be lower than 1.2 meters or higher than 2.5 meters; the installation angle N should be between 30º and 90º (the angle between the surface of the electronic tag and the horizontal plane). ETC usage precautions: The ETC transaction sensing range is 8 meters. When encountering a stopped vehicle ahead, to prevent the vehicle ahead from having a faulty ETC device or no ETC device at all, maintain a distance of more than 10 meters from the vehicle ahead to avoid automatic sensing and paying for the vehicle ahead. The recognized speed for ETC lane passage is 20km/h. If the speed is too fast, the vehicle device information cannot be read, which will also result in failed deductions. Unauthorized removal or movement of the OBU device, detachment or loosening of the ETC electronic tag, etc., will cause the electronic tag to fail. It can be sent to the bank where the ETC card was issued or the highway service office for testing. For non-manual loosening or detachment, only reactivation is required.
2
0
Share

Do I Need to Turn Off the Engine When Adding Windshield Washer Fluid?

Adding windshield washer fluid does not require the vehicle to be turned off, as it has no impact on the engine. Functions of windshield washer fluid: 1. Cleaning performance: Windshield washer fluid typically has wetting, penetrating, and solubilizing functions, thereby serving to clean and remove dirt. 2. Antifreeze performance: The presence of alcohol and ethylene glycol can significantly lower the freezing point of the liquid, thus providing antifreeze effects and quickly dissolving frost. Below are the main functions of vehicle antifreeze: 1. Anticorrosion: It prevents the engine from freezing in winter. Antifreeze, also known as coolant, is a special additive liquid with excellent anticorrosion properties, preventing scale buildup inside the engine and being resistant to evaporation. If the antifreeze level is low during vehicle use, it should be replenished promptly. If the antifreeze is severely lacking, it is necessary to check for potential issues. 2. Service life: Vehicle antifreeze can be used for about two years. There is a common misconception that antifreeze is only used in winter, which is incorrect. Antifreeze is required year-round to ensure the normal operation of the engine and prevent overheating.
2
4
Share

How to Use Tire Repair Fluid?

Tire repair fluid is used by injecting it into the tire through the valve stem to seal the puncture. There are two types of tire repair fluids for cars: one that both repairs the tire and inflates it, and another that only repairs the tire. Both types share the same characteristic in that they are ineffective for larger punctures. Tire repair fluid is a white foam-like liquid stored in a compressed canister. To use it, simply press the nozzle, and the fluid will be injected into the tire through the valve stem. As the vehicle moves, the fluid will evenly coat the inside of the tire.
4
5
Share

Where are the 34 speakers located in the CT6?

Here is a detailed introduction to the speaker locations of the CT6: 1. Cadillac's speakers are very small and distributed across 19 different positions in the CT6 cabin, including under the foot pedals of the driver and front passenger seats, and within the headrests of the front seats. 2. The Bose-Panaray audio system in the new American flagship Cadillac CT6, as the first product in Bose's Advanced-Technology flagship series, is exclusively designed for the Cadillac CT6. Since Bose first custom-installed an audio system for the Cadillac Seville luxury sedan in 1983, this Bose-Panaray system represents the most advanced and acoustically superior car audio system to date. 3. The noise compensation technology provided by BOSE uses microphones to continuously monitor the sound levels throughout the car, effectively filtering out noise, resulting in a relatively excellent listening environment inside the vehicle. The touch strip below the central control screen allows for volume adjustment, featuring a commonly used knob that is quite user-friendly. 4. The overall acoustic environment is highly impressive, with speakers positioned on the A-pillars, delivering excellent soundstage width and depth. Among BOSE audio systems in the same class, the quality of this system is considered outstanding.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.