What are the causes of abnormal engine vibration?

2 Answers
Zoey
07/28/25 9:12pm
Reasons for abnormal engine vibration: 1. Damaged spark plugs: Cracks in the ceramic part of the spark plug can cause the spark plug to fail to ignite. If one cylinder is not working, it can also lead to acceleration vibration. In this case, the spark plug should be replaced; 2. Poor fuel quality: This can result in poor atomization of the fuel injector, causing incomplete combustion of the air-fuel mixture in the cylinder, which also leads to engine vibration and lack of power. It is recommended to use higher-grade gasoline after finishing the current tank and perform a fuel system cleaning; 3. Excessive carbon deposits: A dirty throttle body or excessive carbon deposits on the fuel injector can cause the engine to vibrate more severely than usual when starting the vehicle, and may even require multiple attempts to start. The throttle body and fuel injector should be inspected. If the throttle body is found to be dirty or the fuel injector has excessive carbon deposits, they should be cleaned promptly; 4. Unstable oil pressure: If you have already cleaned the engine carbon deposits, changed the oil and spark plugs, but still notice body vibration at idle, it is recommended to visit a 4S shop to check the fuel supply pressure and the intake pressure sensor for normal operation. The oil pressure should be checked, and components should be replaced if necessary.
Was this review help?
13
2
Share
Carson
08/12/25 1:52am
After driving for a long time, I've encountered engine shaking, which is quite a common issue. The most common cause is spark plug problems—over time, electrode wear or excessive carbon buildup can lead to uneven ignition. Loose engine mounts are another reason; aging rubber components can cause the entire engine to wobble, making it feel shaky while driving. A clogged air filter affects air intake, disrupting the air-fuel mixture ratio and causing shaking. Excessive carbon buildup in the cylinders leads to unstable combustion, resulting in this issue. Faulty sensors, such as the throttle position sensor, can send incorrect signals, causing the engine control unit to misfire. A malfunctioning fuel pump or clogged fuel injectors, leading to uneven fuel delivery, can also be factors. Another possibility is a faulty ignition coil, which fails to provide a consistent spark. This shaking not only makes driving uncomfortable but also increases fuel consumption, and prolonged neglect can damage the engine. During regular maintenance, I check the spark plugs and change the oil periodically to reduce such problems. I recommend that drivers check the engine light codes as soon as they notice shaking, and if necessary, consult a mechanic to diagnose the issue before it worsens. Safety first, after all.
Was this review help?
10
3
Share
Expand All
More Forum Discussions

What is the Proper Adjustment Position for Car Rearview Mirrors?

Proper adjustment positions for car rearview mirrors: 1. Left-side mirror adjustment key points: Position the horizon line at the center of the mirror, then adjust the edge of the car body to occupy one-quarter of the mirror's image; 2. Right-side mirror adjustment key points: Position the horizon line at two-thirds of the mirror's height, then adjust the edge of the car body to occupy one-quarter of the mirror's image; 3. Central rearview mirror adjustment key points: Place the horizon horizontally in the middle of the mirror, position your left ear's image at the left edge of the mirror, and adjust the mirror so that the distant horizon is centered. Car rearview mirrors are located on both sides of the car's front and inside the car's cabin. They reflect the conditions behind, beside, and below the car, allowing the driver to indirectly see these areas clearly, acting as a second pair of eyes and expanding the driver's field of vision.
16
2
Share

Is the Auto Start-Stop Light On Indicating Off or On?

Auto Start-Stop light on indicates off. The engine auto start-stop system automatically shuts off the engine when the vehicle comes to a temporary stop during driving and restarts it when it's time to move forward again. This is achieved by equipping the traditional engine with an enhanced motor featuring idle start-stop functionality, allowing the engine to completely shut down when idle stop conditions are met. The working principle of the start-stop system is that when the vehicle stops moving due to traffic congestion or at an intersection, the driver presses the brake pedal and shifts to neutral. The car engine is the device that provides power to the vehicle, serving as the heart of the car, determining its power, fuel efficiency, stability, and environmental friendliness.
5
4
Share

How to Add Car Coolant?

Correct steps for adding car coolant are: 1. Open the drain valve of the radiator, wait until all the antifreeze inside is drained, then use a properly sized tube to insert into the radiator and flush it with clean water, ensuring the water flows through the entire cooling system; 2. After completing the above steps, close the drain outlet and start adding coolant into the radiator until it is full, but do not exceed the marked line; 3. Start the engine with the radiator cap open, keeping the engine idling for two to three minutes to expel some air from the radiator. If the coolant level starts to drop, continue adding coolant until it reaches the marked line.
16
4
Share

Under which brand does the Leopard car belong?

Leopard is a car brand under Changfeng Corporation. The SUV models under Leopard mainly include Leopard Mattu, Leopard CS10, Leopard CS9, Leopard CS9EV, Leopard Q6, Leopard Black Diamond, etc., and the pickup truck models include Leopard CT7. Leopard Mattu is a compact SUV equipped with a 1.6TGDI engine. Its body dimensions are 4696mm in length, 1906mm in width, and 1709mm in height, with a wheelbase of 2700mm. Leopard Mattu is equipped with a 12.5-inch multimedia system, featuring popular functions such as voice recognition and car networking. Downloading Baidu allows for mapping of commonly used functions like navigation and music.
13
1
Share

What does the N gear in an automatic car mean?

The N gear in an automatic car stands for Neutral, which can be used for temporary stops like waiting at traffic lights. An automatic transmission eliminates the need for the driver to manually shift gears, as the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. Driving an automatic car primarily using the Park (P), Reverse (R), Neutral (N), and Drive (D) gears can fully meet the needs of general driving. However, for certain special driving conditions, other functional gears may be required. If the correct control method is chosen, an automatic car can perform even better than a manual one. Automatic transmissions utilize planetary gear mechanisms to shift gears automatically based on the degree of throttle pedal input and changes in vehicle speed.
20
3
Share

What are the items included in a vehicle annual inspection?

Vehicle annual inspection items include: 1. Checking whether the engine, chassis, body, and their ancillary equipment are clean, complete, and functional; 2. Whether the paint surface is uniform and aesthetically pleasing; 3. Whether any major assemblies have been replaced and if they match the initial inspection records; 4. Verifying whether the vehicle's braking performance, steering control, lights, exhaust, and other safety features meet the required standards. Vehicle annual inspection refers to a mandatory test for every vehicle that has obtained an official license plate and registration certificate, equivalent to an annual physical examination for the vehicle based on the safety technical conditions for motor vehicle operation. Vehicle annual inspections can promptly eliminate potential safety hazards, encourage enhanced vehicle maintenance, and reduce the occurrence of traffic accidents.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.