What are the causes and solutions for the insufficient heating in the Sagitar?

1 Answers
VonTheo
07/29/25 1:02pm
The reasons for insufficient heating in the Sagitar are: 1. Clogged heater core; 2. Insufficient coolant in the cooling system. The solutions for insufficient heating in the Sagitar are: 1. Replenish the coolant; 2. Replace the water pump impeller. The working principle of the car's air conditioning heating system is: When the engine's water temperature becomes too high, the refrigerant gas enters the condenser, where the pressure and temperature decrease, causing the refrigerant gas to condense into a liquid and release heat. Taking the 2018 Sagitar as an example, it belongs to the compact car category, with body dimensions of: length 4753mm, width 1800mm, height 1462mm, a wheelbase of 2731mm, and a fuel tank capacity of 50 liters.
Was this review help?
6
0
Share
More Forum Discussions

How to Use the Auto Start-Stop Function in Manual Transmission Cars?

Manual transmission auto start-stop function usage is as follows: 1. In manual transmission vehicles, the auto start-stop system will shut off the engine automatically when detecting these three conditions: engine idling in neutral gear; wheel speed detected as zero; battery having sufficient power to restart the engine. 2. The engine will immediately restart when the driver presses the clutch pedal, or when automatic transmission vehicles release the brake or turn the steering wheel. 3. Auto start-stop is enabled by default. Vehicles equipped with this function will automatically shut off during temporary stops while driving; the engine will automatically restart after key ignition or push-button start.
19
0
Share

How to Turn Off Audi Daytime Running Lights?

Insert the ignition key with the ignition switch in the off position. Move the turn signal switch to the left turn position, pull up the high beam lever and hold it. Then turn on the ignition switch. Hold for about 5 seconds until you hear a prompt tone, then release the ignition switch and return it to the original position. The daytime running lights will turn off. Repeat the process to turn them back on. On the MMI control panel, select the "CAR" option, then go to "External Lighting" where you'll find the "Daytime Running Lights" option. Navigate to "Daytime Running Lights" and press down the central rotary button. A "Turn Off/On" option will appear. Switch from "On" to "Off" to disable the lights.
13
1
Share

How to Identify China VI Emission Standard?

There are two methods to identify the China VI emission standard: 1. Check the vehicle conformity certificate: The vehicle's conformity certificate can only be viewed after taking delivery of the car, so this method is not very practical. 2. Check environmental protection information: (1) First, locate the vehicle nameplate near the B-pillar on the passenger side. It contains basic vehicle information. Note down two crucial details: the vehicle model number and the engine model number. Then, search online by opening the 'Motor Vehicle Environmental Protection Information Disclosure Website' and enter the engine model number to search for the corresponding vehicle model number. (2) Once the model numbers match, you can view detailed information. The emission standard will be clearly stated in the information section.
5
3
Share

How to Reset the Maintenance Light on Dongfeng Renault

Here are the steps to reset the maintenance light on Dongfeng Renault: 1. First, power on the Koleos without starting the engine. 2. Use the right-hand stalk on the steering wheel to locate the maintenance cycle, then press and hold the OK button to enter the options. 3. The display will then show the remaining distance and time until the next maintenance. Press and hold the OK button again until it displays 5000 km/six months. Here are some additional details: 1. Not all vehicles have a maintenance light function. For vehicles equipped with this feature, the manufacturer sets a default value at the factory. When the vehicle reaches a certain mileage, the "wrench" symbol will appear. 2. Resetting the maintenance light means clearing the reminder information after maintenance is completed, essentially performing an information reset.
11
0
Share

How long can a paint protection film normally last?

Paint protection film can normally last for 2 years. Here is some information about paint protection film: 1. There are currently three popular materials used for paint protection film on the market: PVC, TPH (a softened version of PVC), and TPU. 2. Each of these three types of paint protection film has its own advantages and disadvantages. PVC material tends to yellow and harden, leaving a lot of adhesive residue when removed, typically lasting about half a year; TPH is softer and more easily damaged, with a lifespan of 1-2 years; TPU is durable, resistant to yellowing, and has strong self-healing capabilities, lasting 5-10 years.
4
5
Share

What engine does the BYD G5 use?

BYD G5 uses a 1.5-liter turbocharged engine, which delivers 154 horsepower and a maximum torque of 240 Nm. This engine can output its maximum power at 5,200 rpm and reach peak torque between 1,750 to 3,500 rpm. It features variable valve timing technology and utilizes an aluminum alloy cylinder head and block. The BYD G5 measures 4,700 mm in length, 1,790 mm in width, and 1,480 mm in height, with a wheelbase of 2,670 mm. For suspension, the front employs a MacPherson independent suspension, while the rear uses a torsion beam non-independent suspension. The torsion beam suspension has a simple structure, compact size, and occupies relatively little space, allowing for increased rear passenger room.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.