What are the causes and solutions for high fuel consumption in cars?

How to Set One-Touch Up/Down for Car Windows?

To set the one-touch up/down function for car windows, simply press and hold the window button until the window reaches the top or bottom, then wait for 3-5 seconds. Below is some knowledge about car window operation: 1. Introduction: Whether controlled by smart key or mechanical buttons, one-touch window operation usually comes with an "anti-pinch" feature. During automatic closing, if an object is detected between the glass and window frame, the closing operation will automatically stop and reverse to prevent pinching hazards. 2. Working Principle: Each power window has an Electronic Control Module (ECM). When you press the window control switch, the ECM receives signals from the switch. If the switch is pressed for less than 0.5 seconds, the ECM controls the window to fully open or close. If pressed for more than 0.5 seconds, the ECM continuously powers the window motor, stopping only when the switch is released.

4

3

Share

How to Use the Exhaust Brake?

Exhaust brake switch handle is generally located on the right-hand combination switch of the steering wheel. Pull it backward to turn on the exhaust brake switch, and the corresponding indicator light will illuminate. Note that different vehicle models may vary. Below is relevant information about the exhaust brake: 1. Introduction: The exhaust brake, also known as exhaust braking, is an auxiliary braking system and cannot replace the service brake. A regulating valve is installed on the engine exhaust pipe. By closing this valve, the pressure during the exhaust stroke is increased, utilizing the generated negative pressure to obtain braking force. 2. Function: Its purpose is to reduce or maintain the vehicle's speed without using or minimizing the use of the service brake. However, it cannot bring the vehicle to an emergency stop.

6

5

Share

How to turn on Bluetooth in Trumpchi GS4?

For the Trumpchi GS4, press the Bluetooth button and then search for Bluetooth devices on your phone to pair and connect. Here is some knowledge about the Trumpchi GS4: 1. Intelligence: The 2022 GAC Trumpchi GS4 is equipped with L2-level intelligent driving assistance technology and features an ultra-sensory interactive smart cockpit, supporting OTA upgrades, fatigue monitoring, automatic window closing in rain, remote air conditioning scheduling, and active ventilation. 2. Powertrain: According to the vehicle's nameplate, the new model is powered by a 1.5T turbocharged engine with a maximum net power of 169 horsepower. For the transmission system, the new car offers three options: a 6-speed manual, a 7-speed wet dual-clutch, and a 6-speed automatic transmission, with a fuel consumption of approximately 6.8L per 100 kilometers.

14

2

Share

Is Driving at 69 in a 60 Zone Considered Speeding?

When the speedometer displays 69Km/h, the actual speed is typically between 64-66Km/h, which falls within the 10% speeding tolerance and thus won't incur penalty points. Below are relevant details about speeding: 1. Definition of Speeding: Speeding refers to a driver operating a vehicle at a speed exceeding legal limits or posted speed restrictions. 2. Illegal Speeding Explained: Motor vehicle speeding generally includes exceeding speed limits on highways and other roads. From a safe driving perspective, surpassing legally set maximum speeds or posted speed limits without proper deceleration constitutes illegal speeding. Penalties are administered according to Article 86 of the Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China.

11

5

Share

What are the new regulations for small cars exempt from inspection for ten years?

There is no policy for cars to be exempt from inspection for ten years. However, new cars within the first six years can be exempt from inspection twice. Below are the relevant details about vehicle annual inspection: 1. Regulations for vehicle annual inspection: Passenger vehicles for commercial use must be inspected once a year within the first five years; after five years, they must be inspected every six months. Trucks and large or medium-sized non-commercial passenger vehicles must be inspected once a year within the first ten years; after ten years, they must be inspected every six months. Small and micro non-commercial passenger vehicles must be inspected once every two years within the first six years. Vehicles undergoing normal annual inspection require an on-site inspection and must obtain the annual inspection sticker. For new cars in their second year, since they are not covered by the exemption policy, the owner must drive the vehicle to the local inspection station on the specified date for inspection. Only after passing the inspection can the annual inspection sticker be obtained. 2. Regulations related to the six-year exemption: For new cars under the six-year exemption policy, according to regulations, they must undergo annual inspection in the second year. However, due to the benefits of the exemption policy, no vehicle inspection is required, and the annual inspection sticker can be applied for directly. However, the six-year exemption does not mean exemption from review. Every two years, the owner must bring documents such as the vehicle registration certificate to the local inspection station to complete the procedures and obtain the compliance sticker.

18

4

Share

How to Choose Oil for Manual Transmission?

Manual transmission oil should have high viscosity and be specifically designed for manual transmissions. Below is relevant information about manual transmissions: 1. Introduction: A manual transmission is a gear-shifting device used to alter the engine's speed and torque transmitted to the drive wheels. It enables the vehicle to achieve different traction forces and speeds under various conditions such as starting from a standstill, climbing hills, turning corners, and accelerating, while also allowing the engine to operate within a more favorable range. 2. Structure: A manual transmission consists of the transmission gear mechanism, transmission housing, and control mechanism. 3. Classification: Based on the number of forward gears, they can be categorized into three-speed, four-speed, five-speed, and multi-speed transmissions; based on the shaft type, they can be divided into fixed-shaft (where the gear's rotational axis remains stationary) and rotating-shaft transmissions.

18

3

Share

What are the causes and solutions for high fuel consumption in cars?

How to Set One-Touch Up/Down for Car Windows?

How to Use the Exhaust Brake?

How to turn on Bluetooth in Trumpchi GS4?

Is Driving at 69 in a 60 Zone Considered Speeding?

What are the new regulations for small cars exempt from inspection for ten years?

How to Choose Oil for Manual Transmission?

Can the tires be different during annual vehicle inspection?

What is the appropriate tire pressure for city driving?

How to Transfer Driver's License to Another Location?

Can I Charge My Family Car by Myself When It Runs Out of Battery?