What are the causes and solutions for car pulling to one side?

1 Answers
OwenFitz
07/28/25 2:15pm
Causes and solutions for car pulling to one side: 1. Uneven tire pressure on both sides of the car. If the tire pressure on both sides of the car is inconsistent, with one side higher and the other lower, the car will pull to the side with lower tire pressure. In this case, simply inflate the underinflated tire. It should be noted that the normal tire pressure for car tires is between 2.3bar and 2.5bar. 2. Uneven tire wear on both sides. Uneven tire wear on both sides of the car can also cause the vehicle to pull to one side. When the tires are excessively worn, they should be replaced promptly, or the front and rear tires should be rotated after the car has traveled 60,000 kilometers to balance the wear on the car tires. 3. Incorrect wheel alignment. If the car has not undergone a four-wheel alignment after getting new tires, it may also cause the vehicle to pull to one side. In this case, a four-wheel alignment should be performed on the vehicle. 4. Steering gear malfunction. There are many reasons why a malfunctioning steering gear can cause the car to pull to one side. It is necessary to go to a repair shop or 4S store for professional inspection and repair.
Was this review help?
9
5
Share
More Forum Discussions

Do new tubeless tires require sealant?

New tubeless tires require sealant. Non-universal situations for tubeless tires: When the width is the same and the rim size is identical but the aspect ratio differs, causing the tire's outer diameter to change - for example, 80/80-11 and 80/90-11 tubeless tires cannot be used interchangeably. This creates discrepancies between actual speed and speedometer readings. The principle for tire replacement is to maintain as consistent an outer diameter as possible. Identifying tubeless tire specifications: Tire specifications can be read from the sidewall markings. Currently, almost all passenger vehicle tires are radial tires. According to the specification labeling method for radial passenger tires, they are marked in the order of: tire width, aspect ratio, compatible rim diameter, load index, and speed rating. The XL suffix on tires indicates reinforced load capacity tires.
4
2
Share

What are the uses and significance of seat belts?

Seat belts are used and significant as follows: Uses of seat belts: Restrain occupants as early as possible; Minimize the pressure on occupants during restraint; Maintain the restraint position unchanged to avoid applying force to the more vulnerable parts of the human body. As a means to achieve the above purposes, the use of pre-tensioners and force limiters mentioned above has significantly improved performance in these aspects. Significance of seat belts: Automotive seat belts are safety devices designed to restrain occupants during a collision, prevent secondary collisions between occupants and the steering wheel or dashboard, or avoid injuries caused by being ejected from the vehicle during a collision. Automotive seat belts, also known as safety belts, are a type of occupant restraint system.
6
1
Share

What are the differences between the Regal GS and the LaCrosse?

The differences between the Regal GS and the LaCrosse are as follows: Different prototype cars: The prototype car of the LaCrosse is the Buick LaCrosse by General Motors; the prototype car of the Regal GS is the Opel Insignia. Different vehicle positioning: The LaCrosse is a B-plus class vehicle; the Regal GS is a B-class vehicle. Different body dimensions: The LaCrosse has a length, width, and height of 5026mm, 1866mm, and 1459mm respectively, with a wheelbase of 2905mm; the Regal GS has a length, width, and height of 4913mm, 1863mm, and 1462mm respectively, with a wheelbase of 2877mm.
17
3
Share

What are the reasons for severe shaking in Audi A7?

Audi A7 severe shaking reasons are as follows: Severe engine carbon deposits: The most common cause of car shaking is a dirty throttle or excessive carbon deposits in the fuel injectors. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold start injector will be largely absorbed by the carbon deposits. Engine misfire: Engine misfire mainly refers to one or more cylinders not working properly, manifested as obvious intermittent exhaust gas flow from the car, severe shaking of the exhaust pipe, and noticeable engine vibration, sometimes accompanied by a sputtering sound. This is mostly related to ignition coil failure. Engine combustible mixture sometimes lean and sometimes rich: Causes idle shaking after cold start. The lower the temperature, the more fuel is needed for cold start, and the presence of carbon deposits will affect the smoothness of the cold start.
11
4
Share

What is a New Energy Refueling Station?

New energy refueling stations are facilities that provide power sources for new energy vehicles. Detailed Introduction: There are various types of new energy vehicles, each requiring different types of refueling stations. Hydrogen fuel cell vehicles use hydrogen refueling stations, fuel cell electric vehicles also utilize hydrogen stations, pure electric vehicles rely on charging stations, hybrid vehicles currently use conventional gasoline stations, ether-powered vehicles require ether refueling stations, and ethanol vehicles use ethanol stations. Differences Between New Energy Vehicles and Conventional Fuel Vehicles: Conventional fuel vehicles feature mature technology with unlimited driving range and ubiquitous refueling stations, but their disadvantages include high maintenance costs and traffic restrictions. In contrast, new energy vehicles offer advantages such as unrestricted driving, exemption from purchase tax, low electricity costs, and reduced maintenance expenses. However, their drawbacks include limited driving range, scarcity of charging stations, slow charging speeds, and high battery replacement costs.
2
0
Share

Where Can Minor Car Faults Be Repaired?

Minor car faults can be repaired at 4S shops. Below are detailed introductions about car 4S shops: Sales and After-Sales Services: 4S shops can be divided into sales and after-sales sections. Sales include new car sales, used car sales, large customer sales, beauty and accessory sales, etc. After-sales services include routine maintenance, insurance accident claims, manufacturer warranty claims, car insurance sales, etc. Brand Dealers: As car brand dealers, 4S shops must comply with the automaker's requirements, featuring uniform store design, standardized management, consistent service standards, unified car brand culture, and aligned market activity themes. Car brand manufacturers also assess 4S shops' operational conditions, as they represent the brand's culture and values, serving as the direct channel for users to engage with the car brand.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.