What Are the Causes and Solutions for Car AC Not Cooling?

1 Answers
DelLouis
07/29/25 1:22pm
Reasons and solutions for car AC not cooling: Condenser issues: The condenser is a component that is often overlooked. After prolonged driving, a lot of dust accumulates on the condenser. If the car is frequently driven on dusty roads, even more dust will gather on the condenser. Excessive dust on the condenser significantly reduces its cooling efficiency, leading to poor AC performance. Solution: Clean the condenser. Compressor not working: This could be due to a damaged or malfunctioning compressor capacitor. To activate the AC, the A/C button must be pressed, which controls the compressor. If the compressor fails to operate, the AC will not cool. Solution: Repair or replace the compressor. Refrigerant leakage: If both the internal and external units are functioning, and the compressor is working, the issue is likely due to refrigerant leakage. Solution: Recharge the AC refrigerant.
Was this review help?
9
2
Share
More Forum Discussions

What does 10 liters per 100 kilometers mean?

Generally, it refers to how many liters of fuel a vehicle consumes when traveling 100 kilometers, also known as "fuel consumption per 100 kilometers". This is used to measure a car's fuel economy under different driving conditions. Fuel consumption may vary significantly depending on the driving environment, such as highways versus urban areas. Tips to reduce fuel consumption are as follows: 1. Start the car gently: This not only saves fuel but also creates a smoother driving environment. 2. Maintain a steady speed while driving: Most vehicles achieve relatively low fuel consumption at speeds between 60-90 km/h, which is often referred to as the economical speed range. 3. Accelerate gradually by pressing the throttle lightly: Avoid flooring the accelerator during driving, as this not only wastes fuel but also causes certain wear to the engine.
3
4
Share

Is it normal for a burst of gas to spray out when opening the fuel tank cap?

Fuel tank cap spraying gas indicates good sealing performance of the fuel tank. Below are relevant introductions: Preparation method: Supporting equipment for gasoline production includes atmospheric and vacuum distillation, catalytic cracking, delayed coking, diesel hydro-upgrading, coker gasoline hydro-refining, catalytic cracking gasoline hydro-desulfurization, continuous catalytic reforming (referred to as reforming), benzene extraction, and MTBE units. Main uses: Gasoline is one of the most widely used light petroleum products and an important fuel for engines; it is mainly used as a power fuel for transportation vehicles. Industries such as rubber, paint, dye, printing, pharmaceuticals, and adhesives use gasoline as a solvent. Gasoline is also used as a degreaser for cleaning machine parts and clothing, as well as for pre-treatment of electroplated products.
7
2
Share

What Causes Abnormal Noise in the Transmission?

When bearings fail to operate normally, they can produce abnormal sounds. Below is relevant information: Transmission: A device that changes the speed ratio and direction of motion. It is used in automobiles, tractors, ships, machine tools, and various machines to alter the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft under different working conditions. A gear-driven transmission typically consists of a housing and several gear pairs. Automobile: According to the latest national standard in China, 'Terms and Definitions of Vehicle and Trailer Types,' an automobile is defined as a non-track vehicle powered by an engine, with four or more wheels, primarily used for: transporting people and/or goods; towing vehicles that carry people and/or goods; and for special purposes.
8
4
Share

Can a brand-new car be driven on the highway?

Yes, but since the car is in the break-in period, avoid aggressive acceleration and braking. Here are some precautions during the break-in period: 1. Try to avoid emergency braking: Emergency braking not only shocks the braking system during the break-in period but also increases the impact load on the chassis and engine. It is best to avoid emergency braking within the first 300 kilometers of driving. 2. Avoid overloading: If a new car is overloaded during the break-in period, it can cause damage to the components. Therefore, within the first 1,000 kilometers of driving, the load should generally not exceed 75%-80% of the rated capacity. 3. Driving on the highway: If a new car is driven long distances during the break-in period, the engine's continuous working time will increase, which can lead to component wear. It is recommended to maintain a speed of 120 km/h with the engine RPM not exceeding 3,000. If the RPM exceeds 3,000, consider reducing the speed to keep it at 3,000 RPM. During long-distance driving, take breaks at service areas for about ten minutes.
15
3
Share

What does the China V vehicle emission standard mean?

It refers to China VI, which is the China 6 emission standard. Below is a detailed introduction to the China 6 emission standard: 1. Implementation timeline: Starting from 2019, various cities and regions across China gradually began implementing the China 6 standard, known as the most stringent emission standard in history. The initial China 6 standard implemented was China 6a, which was not very strict, while China 6b represents the true China 6 standard. China 6a served as a transitional standard from China 5 to China 6, with China 6b expected to be officially implemented in 2023. 2. Differences between China 6 and China 5 emission standards: In the China 6b phase, most indicators are 50% stricter than China 5 standards. According to estimates, under the China 6 standard, light gasoline vehicles will see approximately 50% reductions in carbon monoxide, hydrocarbons, non-methane total hydrocarbons, and nitrogen oxide emissions compared to China 5, with particulate matter emissions decreasing by about 40%. For heavy-duty diesel vehicles, nitrogen oxides and particulate matter will be reduced by over 60% compared to China 5. Considering that vehicle exhaust accounts for 20%~40% of air pollution in first-tier cities, implementing China 6 can bring a noticeable improvement of over 10% in urban air quality.
20
3
Share

Can a Car with a Loan Be Transferred?

A car under mortgage cannot be transferred. Below is the relevant information: Reason: The reason is simple, because when applying for a car loan, the ownership of the car has been transferred to the lending institution. In the future, you only have the right to use the car, not the right to dispose of it. Passenger Car: Passenger cars are primarily designed and technically characterized for carrying passengers and their personal belongings and/or temporary items, including the driver's seat, with a maximum of 9 seats. Passenger cars are divided into the following 11 types. Mainly including: standard passenger car, convertible passenger car, luxury passenger car, compact passenger car, roadster, hatchback passenger car, station wagon, multi-purpose passenger car, forward control passenger car, off-road passenger car, and special purpose passenger car.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.